Scalar Quantity – A scalar quantity is defined as the physical quantity with only magnitude
and no direction. Example – speed, distance, mass, etc.
Vector quantity – The physical quantity in which both quantity (magnitude) and direction are
contained. Examples – velocity, force, momentum, etc.
अदिश राशि (Scalar Quantity) – एक अदिश राशि को केवल परिमाण और बिना किसी दिशा वाली भौतिक राशि
के रूप में परिभाषित किया जाता है। उदाहरण – गति, दूरी, द्रव्यमान आदि।
सदिश राशि (Vector Quantity) – वह भौतिक राशि जिसमें मात्रा (परिमाण) और दिशा दोनों होते हैं।
उदाहरण – वेग, बल, संवेग आदि।
RRB NTPC CBT-I (28/12/2020) Evening
1572
A freely suspended magnet always aligns in the _________ direction.
स्वतंत्र रूप से लटका हुआ चुंबक हमेशा _________ दिशा में संरेखित होता है।
✅ Correct Answer: (C)
A magnet is any object that produces its own magnetic field that interacts with other
magnetic fields.
Magnets have two poles, a north pole and a south pole.
There are typically four categories of permanent magnets: Neodymium iron boron, Samarium
cobalt, Alnico, and Ceramic.
चुंबक कोई भी वस्तु है जो अपना स्वयं का चुंबकीय क्षेत्र उत्पन्न करता है जो अन्य चुंबकीय
क्षेत्रों के साथ संपर्क करता है।
चुंबक के दो ध्रुव होते हैं, एक उत्तरी ध्रुव और एक दक्षिणी ध्रुव।
आमतौर पर स्थायी चुंबकों की चार श्रेणियां होती हैं: नियोडिमियम आयरन बोरॉन, समैरियम कोबाल्ट,
एलनिको और सिरेमिक।
RRB NTPC CBT-I (27/01/2021) Evening
1573
Rockets work on the principle of conservation of:
रॉकेट किसके संरक्षण के सिद्धांत पर कार्य करते हैं:
✅ Correct Answer: (C)
Momentum is the product of mass (m) and velocity (v).
Conservation of momentum: Whenever there is no net external force on the system then the
total momentum of the system remains constant. It means Initial momentum = Final momentum.
Rocket ejects gases in the backward direction and so it moves forward so as to conserve the
momentum.
Examples of Linear momentum – A Gun's Recoil, Motorboats etc.
संवेग द्रव्यमान (m) और वेग (v) का गुणनफल है।
संवेग का संरक्षण: जब भी सिस्टम पर कोई शुद्ध बाहरी बल नहीं होता है तो सिस्टम का कुल संवेग
स्थिर रहता है। इसका अर्थ है प्रारंभिक संवेग = अंतिम संवेग।
रॉकेट गैसों को पीछे की दिशा में निकालता है और इसलिए यह संवेग को संरक्षित करने के लिए आगे
बढ़ता है।
रैखिक संवेग के उदाहरण – बंदूक का पीछे हटना (Recoil), मोटरबोट आदि।
RRB NTPC CBT-I (31/01/2021) Morning
1574
The Department of Telecommunication Govt. of India has permitted the manufacture of
mobile handsets with _______ W/kg as maximum SAR value.
भारत सरकार के दूरसंचार विभाग ने अधिकतम SAR मान के रूप में _______ W/kg वाले मोबाइल
हैंडसेट के निर्माण की अनुमति दी है।
✅ Correct Answer: (A)
SAR (Specific Absorption Rate) is a measure of the amount of radio frequency energy absorbed
by the body from a source.
Unit – Watt/Kg.
SAR value information is displayed on the mobile handsets like IMEI (International Mobile
Equipment Identity) display.
SAR (विशिष्ट अवशोषण दर) किसी स्रोत से शरीर द्वारा अवशोषित रेडियो आवृत्ति ऊर्जा की मात्रा का
एक माप है।
इकाई – वाट/किग्रा (Watt/Kg)।
SAR मान की जानकारी IMEI (अंतर्राष्ट्रीय मोबाइल उपकरण पहचान) डिस्प्ले की तरह मोबाइल हैंडसेट
पर प्रदर्शित की जाती है।
RRB NTPC CBT-I (04/03/2021) Morning
1575
Which of the following is most commonly used as a semiconductor in solar cells?
निम्नलिखित में से किसका उपयोग आमतौर पर सौर कोशिकाओं में अर्धचालक के रूप में किया जाता
है?
✅ Correct Answer: (D)
GaAs (Gallium Arsenide) has a high energy conversion efficiency, making it an excellent
material for converting sunlight into electricity.
It is commonly used as a substrate of other semiconductors.
Other semiconductor materials used in solar panels are: Silicon (Si), Tin Oxide (SnO).
GaAs (गैलियम आर्सेनाइड) में उच्च ऊर्जा रूपांतरण दक्षता होती है, जो इसे सूर्य के प्रकाश को
बिजली में बदलने के लिए एक उत्कृष्ट सामग्री बनाती है।
यह आमतौर पर अन्य अर्धचालकों के सब्सट्रेट के रूप में प्रयोग किया जाता है।
सौर पैनलों में उपयोग की जाने वाली अन्य अर्धचालक सामग्री हैं: सिलिकॉन (Si), टिन ऑक्साइड
(SnO)।
RRB NTPC CBT-I (05/03/2021) Evening
1576
The materials through which objects can be seen but not clearly are called _______
materials.
वे सामग्रियां जिनके माध्यम से वस्तुओं को देखा जा सकता है लेकिन स्पष्ट रूप से नहीं,
उन्हें _______ सामग्री कहा जाता है।
✅ Correct Answer: (A)
Examples of translucent materials: Frosted glass, wax paper, sunglasses and vegetable oil.
Transparent materials allow objects on the other side to be seen clearly. Examples: Glass,
Water, Air.
Opaque materials do not allow any light to pass through it. Examples: wood, metal, and
stone.
Lustrous materials have shiny surfaces. Examples: Silver, Aluminium, Gold.
पारभासी (Translucent) सामग्री के उदाहरण: फ्रॉस्टेड ग्लास, मोम का कागज, धूप का चश्मा और
वनस्पति तेल।
पारदर्शी सामग्री दूसरी तरफ की वस्तुओं को स्पष्ट रूप से देखने की अनुमति देती है। उदाहरण:
कांच, पानी, हवा।
अपारदर्शी सामग्री अपने माध्यम से किसी भी प्रकाश को गुजरने नहीं देती है। उदाहरण: लकड़ी, धातु
और पत्थर।
चमकदार (Lustrous) सामग्री की सतहें चमकदार होती हैं। उदाहरण: चांदी, एल्यूमीनियम, सोना।
RRB NTPC CBT-I (08/03/2021) Morning
1577
Who is considered to be the 'father of modern science'?
किसे 'आधुनिक विज्ञान का जनक' माना जाता है?
✅ Correct Answer: (A)
Galileo Galilei (An Italian Astronomer). He is often referred to as the "Father of modern
Astronomy".
Stephen Hawking (British theoretical Physicist) – known for his work on black holes and the
Big Bang.
CV Raman (Indian Physicist): Awarded by Nobel Prize (Physics, 1930) for his work on the
scattering of light.
Vikram Sarabhai (Indian Scientist) – Father of the Indian space program.
गैलीलियो गैलीली (एक इतालवी खगोलशास्त्री)। उन्हें अक्सर "आधुनिक खगोल विज्ञान का जनक" कहा जाता
है।
स्टीफन हॉकिंग (ब्रिटिश सैद्धांतिक भौतिक विज्ञानी) – ब्लैक होल और बिग बैंग पर अपने काम के लिए
जाने जाते हैं।
सीवी रमन (भारतीय भौतिक विज्ञानी): प्रकाश के प्रकीर्णन पर उनके काम के लिए नोबेल पुरस्कार
(भौतिकी, 1930) से सम्मानित किया गया।
विक्रम साराभाई (भारतीय वैज्ञानिक) – भारतीय अंतरिक्ष कार्यक्रम के जनक।
RRB NTPC CBT-I (05/04/2021) Morning
1578
Which of the following attractive forces exists between different layers of graphite?
ग्रेफाइट की विभिन्न परतों के बीच निम्नलिखित में से कौन सा आकर्षण बल मौजूद होता है?
✅ Correct Answer: (D)
Van Der Waals force is an intermolecular force that attracts neutral molecules to one
another. Examples of van der Waals Force – Polymer Formation, Protein Structure, Water
Droplets.
The Electromagnetic force is a physical interaction that happens when electrically charged
particles interact with each other. Example – Chemical Bond, Magnets and the Earth's
magnetic field.
Coulomb's force, also known as electrostatic force, is the attraction or repulsion force
between two electric charges. Example – Rubbing a rod with a cloth, Rubbing a Balloon on a
person's hair, and Charged Comb.
वैन डेर वाल्स बल एक अंतर-आणविक बल है जो तटस्थ अणुओं को एक-दूसरे की ओर आकर्षित करता है। वैन
डेर वाल्स बल के उदाहरण – पॉलिमर निर्माण, प्रोटीन संरचना, पानी की बूंदें।
विद्युत चुम्बकीय बल एक भौतिक अंतःक्रिया है जो तब होती है जब विद्युत आवेशित कण एक दूसरे के
साथ अंतःक्रिया करते हैं। उदाहरण – रासायनिक आबंध, चुंबक और पृथ्वी का चुंबकीय क्षेत्र।
कूलम्ब का बल, जिसे इलेक्ट्रोस्टैटिक बल भी कहा जाता है, दो विद्युत आवेशों के बीच आकर्षण या
प्रतिकर्षण बल है। उदाहरण – कपड़े से रॉड रगड़ना, व्यक्ति के बालों पर गुब्बारा रगड़ना और चार्ज
की गई कंघी।
RRB JE 25/05/2019 (Afternoon)
1579
The acceleration experienced by an object during a free fall is independent of its-
फ्री फॉल (मुक्त पतन) के दौरान किसी वस्तु द्वारा अनुभव किया गया त्वरण किससे स्वतंत्र
होता है-
✅ Correct Answer: (B)
Mass is the measure of Inertia. Its SI unit is kg. It is a scalar quantity.
Mass always stays the same, but weight can change depending on how much gravity is acting
upon an object.
Weight is a vector quantity and its SI unit is Newton. Formula of weight = mass ×
acceleration due to gravity.
The gravity on the moon is one-sixth of the Earth.
द्रव्यमान जड़त्व का माप है। इसकी SI इकाई kg है। यह एक अदिश राशि है।
द्रव्यमान हमेशा समान रहता है, लेकिन वस्तु पर गुरुत्वाकर्षण कितना कार्य कर रहा है, इसके आधार
पर भार बदल सकता है।
भार एक सदिश राशि है और इसकी SI इकाई न्यूटन है। भार का सूत्र = द्रव्यमान × गुरुत्वीय त्वरण।
चंद्रमा पर गुरुत्वाकर्षण पृथ्वी का छठा हिस्सा है।
RRB JE 25/05/2019 (Evening)
1580
Which device in vehicles converts poisonous gases due to burning of petrol or diesel
into harmless gases?
वाहनों में कौन सा उपकरण पेट्रोल या डीजल के जलने से निकलने वाली जहरीली गैसों को
हानिरहित गैसों में बदल देता है?
✅ Correct Answer: (D)
Catalytic converter – It is a device that uses a catalyst to convert three (Unburned
hydrocarbons, Nitrogen oxides, Carbon monoxides) harmful compounds into harmless compounds
like carbon dioxide and water.
Carburetor – The part of a Spark Ignition engine that mixes fuel and air in a certain ratio.
Radiator – A radiator is an important component of an engine's cooling system which helps in
keeping the engine temperature optimum. It provides cool air to the engine by circulating a
mixture of antifreeze and water that does not cause the engine to overheat.
कैटेलिटिक कनवर्टर – यह एक ऐसा उपकरण है जो तीन हानिकारक यौगिकों (अनबर्न हाइड्रोकार्बन,
नाइट्रोजन ऑक्साइड, कार्बन मोनोऑक्साइड) को कार्बन डाइऑक्साइड और पानी जैसे हानिरहित यौगिकों
में बदलने के लिए उत्प्रेरक का उपयोग करता है।
कार्बोरेटर – स्पार्क इग्निशन इंजन का वह हिस्सा जो ईंधन और हवा को एक निश्चित अनुपात में
मिलाता है।
रेडिएटर – रेडिएटर इंजन के कूलिंग सिस्टम का एक महत्वपूर्ण घटक है जो इंजन के तापमान को इष्टतम
रखने में मदद करता है। यह एंटीफ्ीज़ और पानी के मिश्रण को घुमाकर इंजन को ठंडी हवा प्रदान करता
है जिससे इंजन ज़्यादा गरम नहीं होता है।
RRB JE 26/05/2019 (Afternoon)
1581
What are the main devices present in a SONAR which is used to find the distance,
direction and speed of underwater objects?
अंडरवाटर वस्तुओं की दूरी, दिशा और गति का पता लगाने के लिए उपयोग किए जाने वाले SONAR
में मौजूद मुख्य उपकरण क्या हैं?
✅ Correct Answer: (C)
SONAR (Sound navigation and Ranging) is used to determine the depth of water and to locate
the underwater objects.
By Sonar, ultrasonic waves are transmitted towards the bottom of water, their waves are
reflected by any object or bottom, total time is recorded and multiplied with the speed of
ultrasonic waves, to find the depth.
SONAR (साउंड नेविगेशन एंड रेंजिंग) का उपयोग पानी की गहराई निर्धारित करने और पानी के नीचे की
वस्तुओं का पता लगाने के लिए किया जाता है।
सोनार द्वारा अल्ट्रासोनिक तरंगों को पानी के तल की ओर प्रेषित किया जाता है, उनकी तरंगें किसी
भी वस्तु या तल द्वारा परावर्तित होती हैं, कुल समय रिकॉर्ड किया जाता है और गहराई ज्ञात करने
के लिए अल्ट्रासोनिक तरंगों की गति से गुणा किया जाता है।
RRB JE 29/05/2019 (Afternoon)
1582
What is the relation between the speed of sound through seawater v, the time interval
between transmission and reception of ultrasound signal t and the total distance travelled by the
ultrasound 2d, in a SONAR?
SONAR में समुद्री जल के माध्यम से ध्वनि की गति v, अल्ट्रासाउंड सिग्नल के प्रसारण और
रिसेप्शन के बीच के समय अंतराल t और अल्ट्रासाउंड द्वारा तय की गई कुल दूरी 2d के बीच क्या संबंध है?
✅ Correct Answer: (A)
SONAR (Sound Navigation And Ranging): Works by emitting high-frequency ultrasonic waves
(above 20 kHz), and then detecting the echoes that bounce back from objects in the water.
Distance = Speed × Time. Since the sound travels down to the object and back, the total
distance covered is 2d. Thus, 2d = v × t.
Uses: Military and civilian navigation, submarine detection, fish finding, underwater
mapping, and scientific research.
Speed of ships is measured in Knots (One nautical mile per hour).
सोनार (साउंड नेविगेशन एंड रेंजिंग): यह उच्च आवृत्ति वाली अल्ट्रासोनिक तरंगें (20 kHz से ऊपर)
उत्सर्जित करके काम करता है, और फिर पानी में वस्तुओं से वापस उछलने वाली गूंज का पता लगाता है।
दूरी = गति × समय। चूँकि ध्वनि वस्तु तक नीचे जाती है और वापस आती है, तय की गई कुल दूरी 2d है।
इस प्रकार, 2d = v × t।
उपयोग: सैन्य और नागरिक नेविगेशन, पनडुब्बी का पता लगाना, मछली खोजना, पानी के नीचे मानचित्रण
और वैज्ञानिक अनुसंधान।
जहाजों की गति समुद्री मील (Knots) में मापी जाती है (एक समुद्री मील प्रति घंटे)।
RRB JE 31/05/2019 (Afternoon)
1583
What does a scalar quantity have?
अदिश राशि (scalar quantity) में क्या होता है?
✅ Correct Answer: (A)
Example of scalar quantities – Distance (meters), speed (m/s), mass (Kg) and temperature
(°C). They have only magnitude.
Vector Quantities – quantities which are having magnitude as well as direction.
अदिश राशियों के उदाहरण – दूरी (मीटर), गति (m/s), द्रव्यमान (Kg) और तापमान (°C)। इनमें केवल
परिमाण होता है।
सदिश राशियां – वे राशियां जिनमें परिमाण के साथ-साथ दिशा भी होती है।
RRB JE 02/06/2019 (Morning)
1584
Shattering of glass and damage to buildings can be caused by-
कांच का टूटना और इमारतों को नुकसान किसके कारण हो सकता है-
✅ Correct Answer: (B)
When an object travels faster than the speed of sound in a medium, a cone shaped region of
high pressure called a shock wave trails behind it.
They occur in the atmosphere during explosive events, for example during detonations or
lightning strikes, or when aeroplanes break through the sound barrier.
Speed of sound – about 343 meters per second.
जब कोई वस्तु किसी माध्यम में ध्वनि की गति से तेज चलती है, तो शॉक वेव नामक उच्च दबाव का एक
शंकु के आकार का क्षेत्र उसके पीछे रह जाता है।
वे वायुमंडल में विस्फोटक घटनाओं के दौरान होते हैं, उदाहरण के लिए विस्फोट या बिजली गिरने के
दौरान, या जब हवाई जहाज ध्वनि अवरोध को तोड़ते हैं।
ध्वनि की गति – लगभग 343 मीटर प्रति सेकंड।
RRB JE 02/06/2019 (Morning)
1585
Which of the following parts are cleaned using ultrasound?
अल्ट्रासाउंड का उपयोग करके निम्नलिखित में से किन हिस्सों को साफ किया जाता है?
✅ Correct Answer: (C)
An ultrasound is an imaging test that uses sound waves to make pictures of organs, tissues,
and other structures inside your body.
It allows your health care provider to see into your body without surgery and it monitors
the health and development of an unborn baby during pregnancy.
Ultrasound is also used in industry for cleaning hard-to-reach parts.
X-ray machines pass x-ray beams (a form of ionising radiation) through a part of the body to
produce images of the tissue, organs, bones, or teeth inside.
CT scan: It shows detailed images of any part of the body, including the bones, muscles,
organs and blood vessels.
MRI (magnetic resonance imaging): It is a non-invasive imaging technology that produces
three dimensional detailed anatomical images.
अल्ट्रासाउंड एक इमेजिंग परीक्षण है जो आपके शरीर के अंदर अंगों, ऊतकों और अन्य संरचनाओं की
तस्वीरें बनाने के लिए ध्वनि तरंगों का उपयोग करता है।
यह आपके स्वास्थ्य देखभाल प्रदाता को सर्जरी के बिना आपके शरीर में देखने की अनुमति देता है और
यह गर्भावस्था के दौरान अजन्मे बच्चे के स्वास्थ्य और विकास की निगरानी करता है।
अल्ट्रासाउंड का उपयोग उद्योग में उन हिस्सों को साफ करने के लिए भी किया जाता है जिन तक
पहुंचना मुश्किल होता है।
एक्स-रे मशीनें शरीर के किसी हिस्से से एक्स-रे बीम (आयनकारी विकिरण का एक रूप) गुजारती हैं
ताकि अंदर के ऊतकों, अंगों, हड्डियों या दांतों की छवियां तैयार की जा सकें।
सीटी स्कैन: यह हड्डियों, मांसपेशियों, अंगों और रक्त वाहिकाओं सहित शरीर के किसी भी हिस्से की
विस्तृत छवियां दिखाता है।
एमआरआई (मैग्नेटिक रेजोनेंस इमेजिंग): यह एक गैर-इनवेसिव इमेजिंग तकनीक है जो त्रि-आयामी
विस्तृत शारीरिक चित्र बनाती है।
RRB JE 02/06/2019 (Afternoon)
1586
Does the mass of an object vary from place to place?
क्या किसी वस्तु का द्रव्यमान एक स्थान से दूसरे स्थान पर भिन्न होता है?
✅ Correct Answer: (A)
Mass (m) represents the amount of matter in a particle or object. SI unit: Kg.
The mass (m) of an object is a fundamental property of matter that measures the amount of
matter in an object. It is a scalar quantity and is always constant for a given object,
regardless of where it is located.
Some other scalar quantities (which have only magnitude): Length, area, volume, speed,
density, pressure, temperature, energy.
Vector quantities (which have both magnitude and directions): Displacement, velocity,
acceleration, momentum, force.
द्रव्यमान (m) किसी कण या वस्तु में पदार्थ की मात्रा को दर्शाता है। SI इकाई: किग्रा (Kg)।
किसी वस्तु का द्रव्यमान (m) पदार्थ का एक मूल गुण है जो किसी वस्तु में पदार्थ की मात्रा को
मापता है। यह एक अदिश राशि है और किसी दी गई वस्तु के लिए हमेशा स्थिर रहती है, चाहे वह कहीं भी
स्थित हो।
कुछ अन्य अदिश राशियाँ (जिनमें केवल परिमाण होता है): लंबाई, क्षेत्रफल, आयतन, गति, घनत्व,
दबाव, तापमान, ऊर्जा।
सदिश राशियाँ (जिनमें परिमाण और दिशा दोनों होते हैं): विस्थापन, वेग, त्वरण, संवेग, बल।
RRB JE 02/06/2019 (Afternoon)
1587
Weight of an object is directly proportional to its -
किसी वस्तु का भार उसके किसके सीधे आनुपातिक होता है?
✅ Correct Answer: (B)
Weight – It is the measure of the force of gravity acting on a body. It is directly
proportional to Mass (W = mg).
Weight on the surface of earth is 1/6th on the moon's surface.
Translucency – Optical and a perceptual phenomenon that characterises subsurface light
transport through objects and materials.
The specific heat capacity is defined as the quantity of heat (J) absorbed per unit mass
(kg) of the material when its temperature increases 1 K (or 1°C).
भार – यह किसी पिंड पर कार्य करने वाले गुरुत्वाकर्षण बल का माप है। यह द्रव्यमान के सीधे
आनुपातिक होता है (W = mg)।
पृथ्वी की सतह पर जो भार होता है, वह चंद्रमा की सतह पर उसका 1/6वां हिस्सा होता है।
पारभासिता (Translucency) – ऑप्टिकल और एक अवधारणात्मक घटना जो वस्तुओं और सामग्रियों के माध्यम
से उपसतह प्रकाश परिवहन की विशेषता बताती है।
विशिष्ट ऊष्मा क्षमता को तापमान 1 K (या 1°C) बढ़ने पर सामग्री के प्रति इकाई द्रव्यमान (kg)
द्वारा अवशोषित ऊष्मा (J) की मात्रा के रूप में परिभाषित किया गया है।
RRB JE 02/06/2019 (Afternoon)
1588
Which of the following statement is NOT correct for an object moving along a straight
path in accelerated motion?
त्वरित गति से सीधी रेखा पर चलने वाली किसी वस्तु के लिए निम्नलिखित में से कौन सा कथन
सही नहीं है?
✅ Correct Answer: (B)
The rate of change of velocity is called Acceleration (a = Δv/Δt).
Velocity: The rate of change of displacement.
An object moving along a straight path in accelerated motion will have changing speed,
changing velocity, and a force always acting on it – but it does NOT necessarily always go
away from the earth.
वेग के परिवर्तन की दर को त्वरण (a = Δv/Δt) कहा जाता है।
वेग: विस्थापन के परिवर्तन की दर।
त्वरित गति से सीधी रेखा में गतिमान वस्तु की गति बदल रही होगी, वेग बदल रहा होगा, और उस पर
हमेशा एक बल कार्य कर रहा होगा - लेकिन जरूरी नहीं कि यह हमेशा पृथ्वी से दूर जाए।
RRB JE 27/06/2019 (Evening)
1589
The velocity change of an object in every unit time is called _______.
प्रत्येक इकाई समय में किसी वस्तु के वेग परिवर्तन को _______ कहा जाता है।
✅ Correct Answer: (B)
Acceleration. SI unit – meter/second² (m/s²). It is a vector quantity. It can be positive or
negative both.
Angular displacement (SI unit – radian) – The shortest angle between the initial and the
final position for an object in a circular motion around a fixed point.
Angular momentum – The property of any rotating object given by moment of inertia times
angular velocity. It is measured in kilogram meters squared per second (kg m²/s).
Displacement (SI unit – meter) – Change in position of an object. It is a vector quantity.
त्वरण (Acceleration)। SI इकाई – मीटर/सेकंड² (m/s²)। यह एक सदिश राशि है। यह धनात्मक या
ऋणात्मक दोनों हो सकता है।
कोणीय विस्थापन (SI इकाई – रेडियन) – एक निश्चित बिंदु के चारों ओर वृत्ताकार गति में किसी
वस्तु की प्रारंभिक और अंतिम स्थिति के बीच का सबसे छोटा कोण।
कोणीय संवेग – किसी भी घूमने वाली वस्तु का वह गुण जो जड़त्व आघूर्ण और कोणीय वेग के गुणनफल से
दिया जाता है। इसे किलोग्राम मीटर वर्ग प्रति सेकंड (kg m²/s) में मापा जाता है।
विस्थापन (SI इकाई – मीटर) – किसी वस्तु की स्थिति में परिवर्तन। यह एक सदिश राशि है।
RPF Constable 22/01/2019 (Afternoon)
1590
________ is the distance between the bottom of the pitch circle and the teeth of a
gear.
________ पिच वृत्त (pitch circle) के निचले भाग और गियर के दांतों के बीच की दूरी है।
✅ Correct Answer: (C)
Dedendum (denoted by hf): The distance between the bottom of the pitch circle and the root
of the teeth of a gear.
Bore: The diameter of the hole in the center of a gear.
Addendum: Radial distance of a tooth from the pitch circle to the top of the tooth (or
addendum circle).
Hubs: Used to transmit mechanical power from a drive motor by coupling it to an output
device such as a wheel or an arm.
Addendum Circle (Outside circle): Circle drawn through the top of the teeth and is
concentric with the pitch circle.
डिडेंडम (hf द्वारा निरूपित): गियर के पिच सर्कल और दांतों के मूल (root) के बीच की दूरी।
बोर (Bore): गियर के केंद्र में छेद का व्यास।
एडेंडम (Addendum): दांत की पिच सर्कल से दांत के शीर्ष (या एडेंडम सर्कल) तक की रेडियल दूरी।
हब्स (Hubs): एक ड्राइव मोटर से एक आउटपुट डिवाइस जैसे पहिया या हाथ में युग्मन करके यांत्रिक
शक्ति संचारित करने के लिए उपयोग किया जाता है।
एडेंडम सर्कल (बाहरी सर्कल): दांतों के शीर्ष के माध्यम से खींचा गया सर्कल जो पिच सर्कल के साथ
संकेंद्रित होता है।
RRB ALP Tier-II (21/01/2019) Afternoon
1591
Which of the following is an example of a third order lever?
निम्नलिखित में से कौन तीसरे क्रम के लीवर का उदाहरण है?
✅ Correct Answer: (A)
First-class lever – Fulcrum is placed between the load and effort force. Examples: See saw,
scissors, pliers, car jack.
Second class lever – Load is applied in between the fulcrum and the effort force. Examples:
Wheelbarrow, Nutcracker.
Third class lever – Fulcrum is at the one end and the effort force is applied in between the
fulcrum and load. Examples: Human arms, tweezers, Ice tongs.
प्रथम श्रेणी का लीवर – आलंब (Fulcrum) को भार (load) और प्रयास बल (effort force) के बीच रखा
जाता है। उदाहरण: सी-सॉ, कैंची, प्लायर, कार जैक।
द्वितीय श्रेणी का लीवर – भार आलंब और प्रयास बल के बीच लगाया जाता है। उदाहरण: व्हीलबैरो,
नटक्रैकर (सरौता)।
तृतीय श्रेणी का लीवर – आलंब एक छोर पर होता है और प्रयास बल आलंब और भार के बीच लगाया जाता है।
उदाहरण: मानव भुजाएँ, चिमटी, बर्फ का चिमटा (Ice tongs)।
RRB ALP Tier-II (21/01/2019) Afternoon
1592
Which of the following is conserved in a nuclear reaction?
नाभिकीय प्रतिक्रिया में निम्नलिखित में से क्या संरक्षित रहता है?
✅ Correct Answer: (D)
Nuclear reactions: The process by which the identity of a nucleus is changed when it is
bombarded by an energetic particle.
The total energy which means mass, energy, and momentum are conserved.
According to Einstein's equation (E = mc²), if energy is conserved then the mass is also
conserved.
नाभिकीय अभिक्रियाएँ: वह प्रक्रिया जिसके द्वारा एक नाभिक की पहचान तब बदल दी जाती है जब उस पर
किसी ऊर्जावान कण की बमबारी की जाती है।
कुल ऊर्जा जिसका अर्थ है द्रव्यमान, ऊर्जा और संवेग संरक्षित होते हैं। परमाणु संख्या और
द्रव्यमान संख्या दोनों संरक्षित रहते हैं।
आइंस्टीन के समीकरण (E = mc²) के अनुसार, यदि ऊर्जा संरक्षित है तो द्रव्यमान भी संरक्षित है।
RRB ALP Tier-II (21/01/2019) Afternoon
1593
A body is moving on a circular path with uniform angular speed. If the radius of the
circle is doubled, then its centripetal acceleration will be:
एक पिंड एक समान कोणीय गति के साथ वृत्ताकार पथ पर गति कर रहा है। यदि वृत्त की त्रिज्या
दोगुनी कर दी जाए, तो उसका अभिकेन्द्रीय त्वरण (centripetal acceleration) होगा:
✅ Correct Answer: (B)
Given that the radius of the circular path is doubled: r' = 2r.
जहाँ 'r' त्रिज्या है और 'ω' एक समान कोणीय वेग है। अतः यह दोगुना हो जाएगा।
RRB ALP Tier-II (21/01/2019) Afternoon
1594
Which of the following physical quantities is a scalar quantity?
निम्नलिखित में से कौन सी भौतिक राशि एक अदिश राशि है?
✅ Correct Answer: (A)
Electric current: The flow of charged particles through an electrical conductor. Formula: I
= V/R; SI unit – Ampere (A). It is a scalar quantity.
Scalar quantity: Have only magnitudes (Examples – Mass, electric potential).
Vector quantity: Have both magnitude and direction (Examples – Electric field, torque,
impulse).
विद्युत धारा: एक विद्युत चालक के माध्यम से आवेशित कणों का प्रवाह। सूत्र: I = V/R; SI इकाई –
एम्पीयर (A)। यह एक अदिश राशि है।
अदिश राशि: जिसमें केवल परिमाण होते हैं (उदाहरण – द्रव्यमान, विद्युत क्षमता)।
सदिश राशि: परिमाण और दिशा दोनों होते हैं (उदाहरण – विद्युत क्षेत्र, टॉर्क, आवेग)।
RRB ALP Tier-II (21/01/2019) Afternoon
1595
An object with more ______ has more inertia.
अधिक ______ वाली वस्तु में अधिक जड़त्व होता है।
✅ Correct Answer: (A)
Inertia – It is dependent on the mass of the object; the object with the greater mass will
hold greater inertia.
Velocity – the rate of change of displacement with respect to time. Formula: velocity, v =
ds/dt.
जड़त्व (Inertia) – यह वस्तु के द्रव्यमान पर निर्भर करता है; अधिक द्रव्यमान वाली वस्तु में
अधिक जड़त्व होगा।
वेग – समय के संबंध में विस्थापन के परिवर्तन की दर। सूत्र: वेग, v = ds/dt।
RRB ALP Tier-II (23/01/2019) Morning
1596
What will be the direction of the magnetic field at a point directly below a
horizontal power line with the current flowing from east to west when viewed from the west end?
पश्चिम छोर से देखने पर पूर्व से पश्चिम की ओर बहने वाली धारा वाली क्षैतिज पावर लाइन के
ठीक नीचे एक बिंदु पर चुंबकीय क्षेत्र की दिशा क्या होगी?
✅ Correct Answer: (A)
The current is in the east-west direction.
Applying the right-hand thumb rule, we get that the magnetic field (at any point below or
above the wire) turns clockwise in a plane perpendicular to the wire, when viewed from the
east end, and anti-clockwise, when viewed from the west end.
धारा पूर्व-पश्चिम दिशा में है।
दाहिने हाथ के अंगूठे के नियम (right-hand thumb rule) को लागू करने पर, हमें पता चलता है कि
तार के लंबवत तल में चुंबकीय क्षेत्र (तार के नीचे या ऊपर किसी भी बिंदु पर) पूर्व छोर से देखने
पर दक्षिणावर्त मुड़ता है, और पश्चिम छोर से देखने पर वामावर्त (anti-clockwise) मुड़ता है।
RRB Group D 17/09/2018 (Morning)
1597
The force that a neutron exerts on a proton inside an atom is:
किसी परमाणु के अंदर एक न्यूट्रॉन प्रोटॉन पर जो बल लगाता है वह है:
✅ Correct Answer: (D)
Nuclear force – The strong attractive force that holds protons and neutrons together within
an atomic nucleus.
The gravitational force is the attractive force that exists between all objects with mass.
Electrostatic force, also known as the Coulomb force, is the force of attraction or
repulsion between electrically charged particles.
The tidal force arises due to the gravitational interaction between two bodies, such as the
Earth and the Moon or the Earth and the Sun.
परमाणु (नाभिकीय) बल – एक मजबूत आकर्षक बल जो एक परमाणु नाभिक के भीतर प्रोटॉन और न्यूट्रॉन को
एक साथ रखता है।
गुरुत्वाकर्षण बल वह आकर्षक बल है जो द्रव्यमान वाली सभी वस्तुओं के बीच मौजूद होता है।
इलेक्ट्रोस्टैटिक बल, जिसे कूलम्ब बल के रूप में भी जाना जाता है, विद्युत आवेशित कणों के बीच
आकर्षण या प्रतिकर्षण का बल है।
ज्वारीय बल दो पिंडों, जैसे पृथ्वी और चंद्रमा या पृथ्वी और सूर्य के बीच गुरुत्वाकर्षण संपर्क
के कारण उत्पन्न होता है।
RRB Group D 17/09/2018 (Afternoon)
1598
Free fall is possible only in _________.
फ्री फॉल (मुक्त पतन) केवल _________ में संभव है।
✅ Correct Answer: (D)
Free fall refers to the motion of an object under the influence of gravity alone, without
any other forces acting on it.
This is because air and other environmental factors oppose the motion of the falling object,
leading to a reduction in its acceleration and ultimately affecting its velocity. Hence it
is truly possible only in a vacuum.
फ्री फॉल (मुक्त पतन) केवल गुरुत्वाकर्षण के प्रभाव में किसी वस्तु की गति को संदर्भित करता है,
जिस पर कोई अन्य बल कार्य नहीं कर रहा हो।
ऐसा इसलिए है क्योंकि हवा और अन्य पर्यावरणीय कारक गिरने वाली वस्तु की गति का विरोध करते हैं,
जिससे इसके त्वरण में कमी आती है और अंततः इसका वेग प्रभावित होता है। अतः यह वास्तव में केवल
निर्वात में ही संभव है।
RRB Group D 19/09/2018 (Morning)
1599
The work done by friction is not lost but is transferred as _________ energy.
घर्षण द्वारा किया गया कार्य खोता नहीं है बल्कि _________ ऊर्जा के रूप में स्थानांतरित
हो जाता है।
✅ Correct Answer: (D)
Friction Force – The Force which opposes motion.
Types of Friction Forces – Static friction, Sliding friction, Rolling friction and Fluid
friction. Newton is the SI unit of Friction.
Heat Energy – Heat is a form of energy transferred between two (or more) systems and its
surroundings by virtue of temperature difference. The work done by friction is transferred
as heat energy.
घर्षण बल – वह बल जो गति का विरोध करता है।
घर्षण बलों के प्रकार – स्थैतिक घर्षण, सर्पी घर्षण, लोटनिक घर्षण और द्रव घर्षण। न्यूटन घर्षण
की SI इकाई है।
ऊष्मा ऊर्जा – ऊष्मा तापमान के अंतर के कारण दो (या अधिक) प्रणालियों और उसके परिवेश के बीच
स्थानांतरित ऊर्जा का एक रूप है। घर्षण द्वारा किया गया कार्य ऊष्मा ऊर्जा के रूप में
स्थानांतरित होता है।
RRB Group D 20/09/2018 (Afternoon)
1600
_________ of an object is constant and does not change from place to place.
किसी वस्तु का _________ स्थिर होता है और स्थान-स्थान पर नहीं बदलता है।
✅ Correct Answer: (C)
Mass is a scalar quantity that represents the amount of matter in an object. It does not
change from place to place.
Velocity – A vector quantity that represents the rate of change of an object's position with
respect to time.
Weight – A vector quantity that depends on the mass of the object and the strength of the
gravitational field.
Momentum – A vector quantity that represents the product of an object's mass and velocity.
द्रव्यमान एक अदिश राशि है जो किसी वस्तु में पदार्थ की मात्रा को दर्शाती है। यह एक स्थान से
दूसरे स्थान पर नहीं बदलता है।
वेग – एक सदिश राशि जो समय के संबंध में किसी वस्तु की स्थिति में परिवर्तन की दर को दर्शाती
है।
भार – एक सदिश राशि जो वस्तु के द्रव्यमान और गुरुत्वाकर्षण क्षेत्र की ताकत पर निर्भर करती है।
संवेग – एक सदिश राशि जो किसी वस्तु के द्रव्यमान और वेग के गुणनफल को दर्शाती है।
RRB Group D 20/09/2018 (Evening)
1601
Which of the following metals is used in solar panels?
निम्नलिखित में से किस धातु का उपयोग सौर पैनलों में किया जाता है?
✅ Correct Answer: (B)
Silicon, a semiconductor, is commonly used due to its properties.
Solar cells convert light energy into electricity through the photovoltaic effect.
Cesium, with its low ionization energy, is also utilized for efficient sunlight conversion.
सिलिकॉन, जो एक अर्धचालक है, अपने गुणों के कारण आमतौर पर उपयोग किया जाता है।
सौर सेल फोटोवोल्टिक प्रभाव के माध्यम से प्रकाश ऊर्जा को बिजली में परिवर्तित करते हैं।
कम आयनीकरण ऊर्जा वाले सीज़ियम का उपयोग कुशल सूर्य के प्रकाश रूपांतरण के लिए भी किया जाता है।
RRB Group D 01/10/2018 (Afternoon)
1602
A solar cell is made up of:
एक सौर सेल (solar cell) किससे बना होता है:
✅ Correct Answer: (C)
Solar Cell (Photovoltaic cell): Electronic device that converts the energy of light directly
into electricity by the photovoltaic effect.
The Photovoltaic effect is the generation of voltage and electric current in a material upon
exposure to light.
Edmond Becquerel in 1839 was the first to demonstrate the photovoltaic effect
experimentally.
सौर सेल (फोटोवोल्टिक सेल): इलेक्ट्रॉनिक उपकरण जो फोटोवोल्टिक प्रभाव द्वारा प्रकाश की ऊर्जा
को सीधे बिजली में परिवर्तित करता है।
फोटोवोल्टिक प्रभाव प्रकाश के संपर्क में आने पर किसी सामग्री में वोल्टेज और विद्युत धारा का
उत्पन्न होना है।
1839 में एडमंड बेकरेल ने सबसे पहले फोटोवोल्टिक प्रभाव को प्रयोगात्मक रूप से प्रदर्शित किया
था।
RRB Group D 03/10/2018 (Morning)
1603
__________ gas is used to prevent the chips from oxidizing.
चिप्स को ऑक्सीकृत होने से बचाने के लिए __________ गैस का उपयोग किया जाता है।
✅ Correct Answer: (B)
Nitrogen gas is an anti-oxidant, which prevents oxidation of fat and oil molecules.
Another reason that nitrogen gas is often used for food packaging is to provide a
pressurized atmosphere that prevents package collapse.
नाइट्रोजन गैस एक एंटीऑक्सीडेंट है, जो वसा और तेल के अणुओं के ऑक्सीकरण को रोकती है।
खाद्य पैकेजिंग के लिए अक्सर नाइट्रोजन गैस का उपयोग करने का एक और कारण दबावयुक्त वातावरण
प्रदान करना है जो पैकेज को ढहने (पिचकने) से रोकता है।
RRB Group D 03/10/2018 (Evening)
1604
Which of the following statements is true?
A. Hardness: It is the property of a substance to allow reduction in volume under high pressure and this
property is shown by gases.
B. Shape: It is the property of a substance which flows easily and allows it to change its shape under
external force and this property is exhibited by both liquids and gases.
निम्नलिखित में से कौन सा कथन सत्य है?
A. कठोरता (Hardness): यह किसी पदार्थ का वह गुण है जो उच्च दबाव में आयतन में कमी की अनुमति देता है और यह
गुण गैसों द्वारा दिखाया जाता है।
B. आकार (Shape): यह किसी पदार्थ का वह गुण है जो आसानी से बहता है और बाहरी बल के तहत अपना आकार बदलने की
अनुमति देता है और यह गुण तरल और गैसों दोनों द्वारा प्रदर्शित किया जाता है।
✅ Correct Answer: (A)
Hardness: It is the property of matter to maintain its shape even if external force works on
it and SOLIDS show this property (not gases). So, statement A is false (it describes
compressibility).
Fluidity: It is the property of a substance to easily flow and allow a change in its shape
under external forces and this property is exhibited both by liquids and gases. The
statement in B uses "Shape" when it should say "Fluidity", so B is also incorrectly stated.
कठोरता: यह पदार्थ का वह गुण है जो बाहरी बल कार्य करने पर भी अपना आकार बनाए रखता है और ठोस
(गैस नहीं) यह गुण दिखाते हैं। अतः कथन A गलत है (यह संपीड्यता का वर्णन करता है)।
तरलता (Fluidity): यह किसी पदार्थ का आसानी से बहने और बाहरी ताकतों के तहत अपना आकार बदलने की
अनुमति देने का गुण है और यह गुण तरल और गैसों दोनों द्वारा प्रदर्शित किया जाता है। कथन B में
"आकार (Shape)" शब्द का उपयोग किया गया है जबकि इसे "तरलता" कहना चाहिए, इसलिए B भी गलत है।
RRB Group D 05/10/2018 (Afternoon)
1605
Which of the following statements is/are true?
A. Compressibility: It is that property of a substance in which the volume of the substance reduces at
high pressure. This characteristic is found in gases.
B. Shape: This is the property of a substance under which a substance flows or its shape changes under
the influence of external force. This property can be seen in both liquids and gases.
निम्नलिखित में से कौन सा/से कथन सत्य है/हैं?
A. संपीड्यता (Compressibility): यह किसी पदार्थ का वह गुण है जिसमें उच्च दबाव पर पदार्थ का आयतन कम हो
जाता है। यह विशेषता गैसों में पाई जाती है।
B. आकार (Shape): यह किसी पदार्थ का वह गुण है जिसके तहत कोई पदार्थ बहता है या बाहरी बल के प्रभाव में उसका
आकार बदल जाता है। यह गुण तरल पदार्थ और गैसों दोनों में देखा जा सकता है।
✅ Correct Answer: (A)
Fluidity: It is the property of a substance to easily flow and allow a change in its shape
under external forces and this property is exhibited both by liquids and gases.
Statement A is correct about compressibility being found in gases.
Statement B incorrectly labels the property as "Shape" instead of "Fluidity", so B is false
as written.
तरलता (Fluidity): यह किसी पदार्थ का आसानी से बहने और बाहरी ताकतों के तहत अपना आकार बदलने की
अनुमति देने का गुण है और यह गुण तरल और गैसों दोनों द्वारा प्रदर्शित किया जाता है।
गैसों में संपीड्यता पाए जाने के बारे में कथन A सही है।
कथन B गलत तरीके से इस गुण को "तरलता" के बजाय "आकार" के रूप में लेबल करता है, इसलिए B गलत है।
RRB Group D 08/10/2018 (Morning)
1606
Which of the following statements is/are true?
A. Compressibility: It is the property of matter to maintain its shape even if external forces work on
it and solids show this property.
B. Fluidity: It is the property of a substance to easily flow and allow change in its shape under
external forces and this property is exhibited both by liquids and gases.
निम्नलिखित में से कौन सा/से कथन सत्य है/हैं?
A. संपीड्यता (Compressibility): यह पदार्थ का वह गुण है जो बाहरी बल के काम करने पर भी अपना आकार बनाए रखता
है और ठोस यह गुण दिखाते हैं।
B. तरलता (Fluidity): यह किसी पदार्थ का आसानी से बहने और बाहरी ताकतों के तहत अपने आकार में बदलाव की
अनुमति देने का गुण है और यह गुण तरल पदार्थ और गैसों दोनों द्वारा प्रदर्शित किया जाता है।
✅ Correct Answer: (A)
Compressibility – The property due to which the particles of matter can be compressed or
reduced in volume by applying force or pressure. This is shown by gases, NOT solids (A is
false – A has confused Compressibility with Rigidity).
Fluidity – It is the property of a substance to easily flow and allow change in shape under
external forces, exhibited by liquids and gases (B is true).
Compressibility factor (Z) – The ratio of the molar volume of a gas to the molar volume of
an ideal gas at the same temperature and pressure.
Rigidity – It is the property which helps a substance to retain its shape when force is
applied to it.
संपीड्यता – वह गुण जिसके कारण बल या दबाव लगाकर पदार्थ के कणों को संपीड़ित किया जा सकता है या
उनके आयतन को कम किया जा सकता है। यह गैसों द्वारा दिखाया जाता है, ठोस पदार्थों द्वारा नहीं (A
गलत है - A ने संपीड्यता को दृढ़ता के साथ भ्रमित किया है)।
तरलता – यह किसी पदार्थ का आसानी से बहने और बाहरी बलों के तहत आकार में परिवर्तन की अनुमति
देने का गुण है, जिसे तरल और गैसों द्वारा प्रदर्शित किया जाता है (B सत्य है)।
संपीड्यता कारक (Z) – एक ही तापमान और दबाव पर एक गैस के दाढ़ की मात्रा (molar volume) और एक
आदर्श गैस के दाढ़ की मात्रा का अनुपात।
दृढ़ता (Rigidity) – यह वह गुण है जो किसी पदार्थ पर बल लगाए जाने पर उसका आकार बनाए रखने में
मदद करता है।
RRB Group D 09/10/2018 (Morning)
1607
Which of the following statements is/are true?
A. Density: The mass of a substance per unit volume is called density.
B. Liquidity: It is a type of energy generated in a substance due to the motion of its particles. This
is also the reason for kinetic energy in matter.
निम्नलिखित में से कौन सा/से कथन सत्य है/हैं?
A. घनत्व (Density): प्रति इकाई आयतन किसी पदार्थ के द्रव्यमान को घनत्व कहा जाता है。
B. तरलता (Liquidity): यह किसी पदार्थ में उसके कणों की गति के कारण उत्पन्न होने वाली एक प्रकार की ऊर्जा
है। पदार्थ में गतिज ऊर्जा का भी यही कारण है।
✅ Correct Answer: (B)
Density: The density of a substance (ρ) is defined as the ratio of its mass (M) to its
volume (V). Formula: Density = M/V. Statement A is correct.
The relative density is defined as the ratio of the density of the substance to the density
of water at 4°C. The density of water is maximum at 4°C.
Statement B is false – the description given for "Liquidity" actually describes kinetic
energy, not liquidity. Kinetic Energy of an object is the form of energy that it possesses
due to its motion. Formula: (1/2) × mass × (velocity)².
घनत्व: किसी पदार्थ के घनत्व (ρ) को उसके द्रव्यमान (M) और उसके आयतन (V) के अनुपात के रूप में
परिभाषित किया जाता है। सूत्र: घनत्व = M/V। कथन A सही है।
सापेक्ष घनत्व को 4°C पर पानी के घनत्व और पदार्थ के घनत्व के अनुपात के रूप में परिभाषित किया
गया है। 4°C पर पानी का घनत्व अधिकतम होता है।
कथन B गलत है - "तरलता (Liquidity)" के लिए दिया गया विवरण वास्तव में गतिज ऊर्जा का वर्णन करता
है, तरलता का नहीं। किसी वस्तु की गतिज ऊर्जा ऊर्जा का वह रूप है जो उसकी गति के कारण होती है।
सूत्र: (1/2) × द्रव्यमान × (वेग)²।
RRB Group D 09/10/2018 (Afternoon)
1608
Which of the following statements is true?
A. Rigidity: The strength of a substance per unit mass is known as its Rigidity.
B. Kinetic Energy: It is the type of energy present in a substance due to continuously moving particles
in it. This is also the reason for kinetic motion in matter.
निम्नलिखित में से कौन सा कथन सत्य है?
A. दृढ़ता (Rigidity): प्रति इकाई द्रव्यमान किसी पदार्थ की शक्ति को उसकी दृढ़ता के रूप में जाना जाता
है।
B. गतिज ऊर्जा (Kinetic Energy): यह किसी पदार्थ में लगातार चलने वाले कणों के कारण मौजूद ऊर्जा का प्रकार
है। पदार्थ में गतिज गति का भी यही कारण है।
✅ Correct Answer: (A)
Rigidity is a physical property of solids that describes its ability to resist change in
shape when an external force is applied. It is a measure of how much a material resists
being stretched or compressed. Statement A is false – it incorrectly defines rigidity as
"strength per unit mass".
Statement B is true – kinetic energy is present in a substance due to continuously moving
particles.
दृढ़ता (Rigidity) ठोस पदार्थों का एक भौतिक गुण है जो बाहरी बल लगाए जाने पर आकार में परिवर्तन
का विरोध करने की क्षमता का वर्णन करता है। यह इस बात का माप है कि कोई सामग्री खींचने या
संपीड़ित होने का कितना विरोध करती है। कथन A गलत है - यह दृढ़ता को "प्रति इकाई द्रव्यमान
शक्ति" के रूप में गलत तरीके से परिभाषित करता है।
कथन B सत्य है - लगातार चलने वाले कणों के कारण किसी पदार्थ में गतिज ऊर्जा मौजूद होती है।
RRB Group D 09/10/2018 (Evening)
1609
Which of the following statements is/are true?
A. Density: The mass contained in a substance per unit volume is called density.
B. Kinetic Energy: It is the type of energy present in an object when it is in motion because the
particles of that object/substance are continuously moving, hence the substance has kinetic energy.
निम्नलिखित में से कौन सा/से कथन सत्य है/हैं?
A. घनत्व: प्रति इकाई आयतन किसी पदार्थ में निहित द्रव्यमान को घनत्व कहा जाता है।
B. गतिज ऊर्जा: यह एक वस्तु में मौजूद ऊर्जा का प्रकार है जब वह गति में होती है क्योंकि उस वस्तु/पदार्थ के
कण लगातार घूम रहे होते हैं, इसलिए पदार्थ में गतिज ऊर्जा होती है।
✅ Correct Answer: (B)
The SI unit of density is kg/m³. Mathematically, it is expressed as Mass/Volume. Both
definitions are correct.
Kinetic energy – SI unit is Joule (J). Formula: (1/2)mv². Both definitions are correct.
घनत्व की SI इकाई kg/m³ है। गणितीय रूप से, इसे द्रव्यमान/आयतन के रूप में व्यक्त किया जाता है।
दोनों परिभाषाएँ सही हैं।
गतिज ऊर्जा – SI इकाई जूल (J) है। सूत्र: (1/2)mv²। दोनों परिभाषाएँ सही हैं।
RRB Group D 10/10/2018 (Morning)
1610
Which instrument is used to determine the richness of milk?
दूध की शुद्धता (richness) निर्धारित करने के लिए किस उपकरण का उपयोग किया जाता है?
✅ Correct Answer: (B)
Any objects experience a force of buoyancy when they are immersed in a fluid.
The magnitude of this buoyant force depends on the density of the fluid.
A lactometer works on this principle to measure the purity/richness of milk.
किसी भी वस्तु को किसी तरल पदार्थ में डुबाने पर उसे उत्प्लावन बल का अनुभव होता है।
इस उत्प्लावन बल का परिमाण तरल के घनत्व पर निर्भर करता है।
दूध की शुद्धता/समृद्धि को मापने के लिए एक लैक्टोमीटर इसी सिद्धांत पर काम करता है।
RRB Group D 10/10/2018 (Evening)
1611
Which of the following statements is/are true?
A. Rigidity: According to the type of matter, shape differs, depending upon location of particles. Eg,
solids have definite shape while liquids acquire the shape of their container and gases, as such, don't
have any shape.
B. Compressibility: It is the property of matter to allow a decrease in volume under high pressure and
gases show this property.
निम्नलिखित में से कौन सा/से कथन सत्य है/हैं?
A. दृढ़ता: पदार्थ के प्रकार के अनुसार, कणों के स्थान के आधार पर आकार भिन्न होता है। उदाहरण के लिए, ठोस
का निश्चित आकार होता है जबकि तरल अपने कंटेनर का आकार लेते हैं और गैसों का कोई आकार नहीं होता है।
B. संपीड्यता: यह पदार्थ का वह गुण है जो उच्च दबाव में आयतन में कमी की अनुमति देता है और गैसें यह गुण
दिखाती हैं।
✅ Correct Answer: (B)
Rigidity: Rigidity is the property of matter to resist the change in the shape of matter.
Modulus of Rigidity = Shearing stress / Shearing strain.
Fluidity: Fluidity is the property of matter by virtue of which matter flows.
Both statements A and B are correct as given.
दृढ़ता (Rigidity): दृढ़ता पदार्थ का वह गुण है जो पदार्थ के आकार में परिवर्तन का विरोध करता
है। दृढ़ता मापांक (Modulus of Rigidity) = अपरूपण प्रतिबल / अपरूपण विकृति (Shearing stress /
Shearing strain)।
तरलता: तरलता पदार्थ का वह गुण है जिसके कारण पदार्थ बहता है।
दिए गए कथन A और B दोनों सही हैं।
RRB Group D 11/10/2018 (Morning)
1612
What does the odometer of an automobile measure?
किसी ऑटोमोबाइल का ओडोमीटर क्या मापता है?
✅ Correct Answer: (A)
Odometer measures distance traveled.
Instruments and their uses: Ammeter – Measures electric current in ampere.
Barometer – Measures atmospheric pressure.
Radiometer – Measures intensity or force radiation.
Theodolite – Measures horizontal and vertical angles.
ओडोमीटर तय की गई दूरी को मापता है।
उपकरण और उनके उपयोग: एमीटर – एम्पीयर में विद्युत धारा मापता है।
बैरोमीटर – वायुमंडलीय दबाव मापता है।
रेडियोमीटर – विकिरण की तीव्रता या बल को मापता है।
थियोडोलाइट – क्षैतिज और ऊर्ध्वाधर कोण मापता है।
RRB Group D 11/10/2018 (Afternoon)
1613
____is used to measure the strength and velocity of wind.
हवा की ताकत और वेग को मापने के लिए ____का उपयोग किया जाता है।
✅ Correct Answer: (D)
Anemometer is used to measure the strength and velocity of wind.
Other instruments and their uses: Speedometer: It is a scale that measures and represents
the instantaneous speed of a vehicle.
Lactometer: It is a small glass apparatus that is used to examine the purity of the milk.
Thermometer: an instrument for measuring the temperature of a system.
एनीमोमीटर (Anemometer) का उपयोग हवा की शक्ति और वेग को मापने के लिए किया जाता है।
अन्य उपकरण और उनके उपयोग: स्पीडोमीटर: यह एक पैमाना है जो किसी वाहन की तात्कालिक गति को मापता
है और प्रदर्शित करता है।
लैक्टोमीटर: यह कांच का एक छोटा उपकरण है जिसका उपयोग दूध की शुद्धता की जांच करने के लिए किया
जाता है।
थर्मामीटर: किसी प्रणाली का तापमान मापने का उपकरण।
RRB Group D 12/10/2018 (Morning)
1614
Barometer is related to Pressure, in the same way as Seismograph is related
to________.
बैरोमीटर का संबंध दबाव (Pressure) से है, उसी प्रकार सीस्मोग्राफ का संबंध ________ से
है।
✅ Correct Answer: (B)
A barometer is an instrument used to measure atmospheric pressure.
A seismograph is an instrument used to detect and record earthquakes.
बैरोमीटर वायुमंडलीय दबाव मापने के लिए इस्तेमाल किया जाने वाला उपकरण है।
सीस्मोग्राफ एक उपकरण है जिसका उपयोग भूकंप का पता लगाने और उसे रिकॉर्ड करने के लिए किया जाता
है।
RRB Group D 16/10/2018 (Evening)
1615
Which of the following resistors is known as a heat sensitive resistor?
निम्नलिखित में से किस अवरोधक (resistor) को ऊष्मा संवेदनशील अवरोधक के रूप में जाना
जाता है?
✅ Correct Answer: (A)
A thermistor is a heat sensitive device whose resistivity changes very rapidly with change
of temperature.
A transistor is a type of semiconductor device that can be used to conduct and insulate
electric current or voltage.
A capacitor is a two-terminal electrical device that can store energy in the form of an
electric charge.
थर्मिस्टर एक ऊष्मा संवेदनशील उपकरण है जिसकी प्रतिरोधकता तापमान में परिवर्तन के साथ बहुत तेजी
से बदलती है।
ट्रांजिस्टर एक प्रकार का अर्धचालक उपकरण है जिसका उपयोग विद्युत प्रवाह या वोल्टेज को संचालित
करने और इन्सुलेट करने के लिए किया जा सकता है।
संधारित्र (Capacitor) एक दो-टर्मिनल विद्युत उपकरण है जो विद्युत आवेश के रूप में ऊर्जा
संग्रहीत कर सकता है।
RRB Group D 26/10/2018 (Afternoon)
1616
Motion of a boy, sitting on a swing, is __________.
झूले पर बैठे एक लड़के की गति __________ है।
✅ Correct Answer: (A)
The motion which repeats itself in equal intervals of time is known as periodic motion.
Examples of periodic motions – The motion of a pendulum, the vibration of a guitar string,
the rotation of the Earth about its axis, the revolving of the Earth around the Sun, and the
revolving of the Sun around the center of the Galaxy, etc.
वह गति जो समान समय अंतराल में स्वयं को दोहराती है, आवर्ती गति (periodic motion) कहलाती है।
आवर्ती गतियों के उदाहरण – पेंडुलम की गति, गिटार के तार का कंपन, अपनी धुरी पर पृथ्वी का
घूमना, सूर्य के चारों ओर पृथ्वी का चक्कर लगाना, और आकाशगंगा के केंद्र के चारों ओर सूर्य का
घूमना आदि।
RRB Group D 31/10/2018 (Afternoon)
1617
Negative acceleration is in the opposite direction of:
ऋणात्मक त्वरण किसकी विपरीत दिशा में होता है:
✅ Correct Answer: (A)
Acceleration: The rate of change of velocity. It can have positive or negative values.
Acceleration (a) = Change in velocity (Δv) / time (t). Unit – (m/s²).
Negative acceleration (retardation/deceleration) acts opposite to the direction of velocity.
त्वरण: वेग परिवर्तन की दर। इसके धनात्मक या ऋणात्मक मान हो सकते हैं।
त्वरण (a) = वेग में परिवर्तन (Δv) / समय (t)। इकाई – (m/s²)।
ऋणात्मक त्वरण (मंदन/deceleration) वेग की दिशा के विपरीत कार्य करता है।
RRB ALP Tier-I (09/08/2018) Morning
1618
The first equation of motion gives the relation between:
गति का पहला समीकरण किसके बीच संबंध बताता है:
✅ Correct Answer: (C)
First Equation of Motion: v = u + at. This relates velocity and time.
Second Equation of Motion: s = ut + (1/2)at².
Third Equation of Motion: v² = u² + 2as.
{Initial velocity (u), final velocity (v) and acceleration (a). Distance traveled – (s)}.
गति का पहला समीकरण: v = u + at। यह वेग और समय से संबंधित है।
गति का दूसरा समीकरण: s = ut + (1/2)at²।
गति का तीसरा समीकरण: v² = u² + 2as।
{प्रारंभिक वेग (u), अंतिम वेग (v) और त्वरण (a)। तय की गई दूरी – (s)}।
RRB ALP Tier-I (10/08/2018) Afternoon
1619
The second equation of motion gives the relation between:
गति का दूसरा समीकरण किसके बीच संबंध बताता है:
✅ Correct Answer: (B)
Second Equation of Motion: s = ut + (1/2)at².
where s = distance traveled by the object (position), u = initial velocity, t = time and a =
acceleration of the object.
गति का दूसरा समीकरण: s = ut + (1/2)at²।
जहाँ s = वस्तु द्वारा तय की गई दूरी (स्थिति), u = प्रारंभिक वेग, t = समय और a = वस्तु का
त्वरण।
RRB ALP Tier-I (10/08/2018) Evening
1620
Which of the following is a velocity-time graph for uniform motion of a car?
निम्नलिखित में से कौन सा कार की एक समान गति (uniform motion) के लिए वेग-समय ग्राफ है?
✅ Correct Answer: (B)
The slope of a Velocity–Time graph of an object moving with uniform velocity is a straight
line and parallel to the x-axis when velocity is taken along the y-axis and time is taken
along the x-axis.
Uniform motion – Velocity of the body is constant with time. Example – velocity (v) =
constant.
Option (a) shows non-uniform motion (unequal distance covered by object in equal interval of
time).
Option (c) – If an object is moving with non-uniform variation in velocity with time, the
velocity-time graph is a zig-zag type.
Option (d) – The nature of the graph shows that velocity of the object is changing by equal
amounts in equal intervals of time (uniform acceleration).
एक समान वेग से गतिमान वस्तु के वेग-समय ग्राफ का ढलान एक सीधी रेखा होता है और जब वेग को
y-अक्ष के साथ लिया जाता है और समय को x-अक्ष के साथ लिया जाता है तो यह x-अक्ष के समानांतर
होता है।
एकसमान गति – समय के साथ पिंड का वेग स्थिर रहता है। उदाहरण – वेग (v) = स्थिर।
विकल्प (a) असमान गति (समान समय अंतराल में वस्तु द्वारा तय की गई असमान दूरी) को दर्शाता है।
विकल्प (c) – यदि कोई वस्तु समय के साथ वेग में गैर-समान भिन्नता के साथ आगे बढ़ रही है, तो
वेग-समय ग्राफ एक ज़िग-ज़ैग प्रकार का होता है।
विकल्प (d) – ग्राफ की प्रकृति दर्शाती है कि वस्तु का वेग समान समय अंतराल (समान त्वरण) में
समान मात्रा में बदल रहा है।
RRB ALP Tier-I (10/08/2018) Evening
1621
Which of the following changes when a body performs uniform circular motion?
जब कोई पिंड एक समान वृत्ताकार गति करता है तो निम्नलिखित में से क्या बदलता है?
✅ Correct Answer: (A)
Circular Motion: Circular motion is a movement of an object along the circumference of a
circle or rotation along a circular path.
Uniform circular motion: The circular motion in which the speed of the particle remains
constant is called uniform circular motion.
In a uniform circular motion, force supplies the centripetal acceleration. Though speed
remains constant, direction continuously changes.
वृत्ताकार गति: वृत्ताकार गति किसी वृत्त की परिधि के साथ किसी वस्तु की गति या वृत्ताकार पथ के
साथ घूमना है।
एकसमान वृत्ताकार गति: वह वृत्ताकार गति जिसमें कण की गति स्थिर रहती है, एकसमान वृत्ताकार गति
कहलाती है।
एक समान वृत्ताकार गति में, बल अभिकेन्द्रीय त्वरण प्रदान करता है। हालांकि गति स्थिर रहती है,
दिशा लगातार बदलती रहती है।
RRB ALP Tier-I (14/08/2018) Afternoon
1622
If the distance travelled by an object is zero, then the displacement of the object:
यदि किसी वस्तु द्वारा तय की गई दूरी शून्य है, तो वस्तु का विस्थापन:
✅ Correct Answer: (C)
Distance is the path traveled by the object.
Displacement is the shortest distance between final and initial position.
Since distance is zero, the body has not traveled any path; hence final and initial position
is also the same. So displacement is zero.
दूरी वस्तु द्वारा तय किया गया पथ है।
विस्थापन अंतिम और प्रारंभिक स्थिति के बीच की सबसे छोटी दूरी है।
चूंकि दूरी शून्य है, पिंड ने कोई पथ तय नहीं किया है; इसलिए अंतिम और प्रारंभिक स्थिति भी समान
है। अतः विस्थापन शून्य है।
RRB ALP Tier-I (14/08/2018) Evening
1623
The tendency of undisturbed objects to stay at rest or to keep moving with the same
velocity is called:
अशांत (undisturbed) वस्तुओं की आराम की अवस्था में रहने या समान वेग से गतिमान रहने की
प्रवृत्ति क्या कहलाती है:
✅ Correct Answer: (D)
Types of inertia:
Inertia of rest – resistance of the body to change its state of rest unless acted upon by an
external force. Example – When books are piled one above the other and the lowest book is
suddenly pulled out, the rest of the books remain intact.
Inertia of motion – tendency of a body to resist any change in its condition of uniform
motion. Example – A person jumps out from a train and falls forward.
Inertia of direction – When an object is moving in a direction it will remain moving in the
same direction until an external force is applied. Example – when driving a car, one's body
moves to the side.
जड़त्व के प्रकार:
विराम का जड़त्व – किसी बाहरी बल द्वारा कार्य न किए जाने तक शरीर के विश्राम की अवस्था को
बदलने का प्रतिरोध। उदाहरण – जब किताबें एक के ऊपर एक रखी जाती हैं और सबसे नीचे वाली किताब को
अचानक बाहर खींच लिया जाता है, तो बाकी किताबें बरकरार रहती हैं।
गति का जड़त्व – किसी पिंड की एक समान गति की स्थिति में किसी भी बदलाव का विरोध करने की
प्रवृत्ति। उदाहरण – एक व्यक्ति ट्रेन से बाहर कूदता है और आगे की ओर गिर जाता है।
दिशा का जड़त्व – जब कोई वस्तु किसी दिशा में गति कर रही है तो वह उसी दिशा में गति करती रहेगी
जब तक कि कोई बाहरी बल न लगाया जाए। उदाहरण – कार चलाते समय शरीर का एक तरफ झुकना।
RRB ALP Tier-I (17/08/2018) Morning
1624
In which of the following examples will an athlete have maximum accelerated motion?
निम्नलिखित में से किस उदाहरण में एक एथलीट की त्वरित गति (accelerated motion) अधिकतम
होगी?
✅ Correct Answer: (D)
Acceleration is the rate of change of velocity with time. SI unit – m/s².
Types of Acceleration: Uniform Acceleration – An object is said to move in uniform
acceleration if an equal amount of velocity increases in equal intervals of time. Example –
A ball rolling down a slope, a skydiver jumping out of a plane.
Non-uniform Acceleration – An object is said to be with non-uniform acceleration if the
velocity of the object changes by unequal amounts in equal intervals of time. Example – A
car going around a curve.
Instantaneous Acceleration – The acceleration of an object at any instant of time. A
circular track provides continuous change of direction, hence maximum acceleration.
त्वरण समय के साथ वेग के परिवर्तन की दर है। SI इकाई – m/s²।
त्वरण के प्रकार: एकसमान त्वरण – किसी वस्तु को एकसमान त्वरण में गतिमान कहा जाता है यदि समान
समय अंतराल में वेग की समान मात्रा बढ़ती है। उदाहरण – ढलान से नीचे लुढ़कती गेंद, विमान से
छलांग लगाता हुआ स्काईडाइवर।
असमान त्वरण – किसी वस्तु को असमान त्वरण के साथ कहा जाता है यदि वस्तु का वेग समान समय अंतराल
में असमान मात्रा में बदलता है। उदाहरण – एक वक्र के चारों ओर जाती हुई कार।
तात्कालिक त्वरण – किसी भी क्षण किसी वस्तु का त्वरण। एक वृत्ताकार ट्रैक दिशा में निरंतर
परिवर्तन प्रदान करता है, इसलिए अधिकतम त्वरण होता है।
RRB ALP Tier-I (20/08/2018) Afternoon
1625
Why does a sprinter keep running even after crossing the finishing line?
फिनिशिंग लाइन पार करने के बाद भी एक धावक क्यों दौड़ता रहता है?
✅ Correct Answer: (C)
Sir Isaac Newton formulated the laws of motion in the year 1686 in his book "Principia
Mathematica Philosophiae Naturalis".
First Law (Inertia): Any object will remain in its existing state of motion or rest unless a
net external force acts on it.
Second Law (Force): The acceleration of an object depends on the mass of the object and the
amount of force applied; F = ma.
Third Law (Action and Reaction): For every action, there is an equal and opposite reaction.
The sprinter keeps running after crossing the line due to inertia of motion.
सर आइजैक न्यूटन ने वर्ष 1686 में अपनी पुस्तक "प्रिंसिपिया मैथमैटिका फिलॉसॉफी नेचुरलिस" में
गति के नियम तैयार किए थे।
पहला नियम (जड़त्व): कोई भी वस्तु अपनी गति या विश्राम की मौजूदा स्थिति में तब तक बनी रहेगी जब
तक कि उस पर कोई शुद्ध बाहरी बल कार्य न करे।
दूसरा नियम (बल): किसी वस्तु का त्वरण वस्तु के द्रव्यमान और लगाए गए बल की मात्रा पर निर्भर
करता है; F = ma।
तीसरा नियम (क्रिया और प्रतिक्रिया): प्रत्येक क्रिया के लिए एक समान और विपरीत प्रतिक्रिया
होती है।
गति के जड़त्व के कारण धावक लाइन पार करने के बाद भी दौड़ता रहता है।
RRB ALP Tier-I (20/08/2018) Afternoon
1626
The rate of change of displacement is called:
विस्थापन के परिवर्तन की दर को क्या कहा जाता है:
✅ Correct Answer: (A)
Constant velocity – Speed at which an object travels equal displacements in equal times.
Variable velocity – Speed at which an object has different displacements at different times.
Instantaneous velocity – Constant velocity over a very short period of time.
Average velocity – Total distance traveled during a time.
Transverse velocity – The linear velocity of an object moving along a circular path.
स्थिर वेग – वह गति जिस पर कोई वस्तु समान समय में समान विस्थापन तय करती है।
परिवर्तनीय वेग – वह गति जिस पर किसी वस्तु का अलग-अलग समय पर अलग-अलग विस्थापन होता है।
तात्कालिक वेग – बहुत कम समय में स्थिर वेग।
औसत वेग – एक समय के दौरान तय की गई कुल दूरी।
अनुप्रस्थ वेग (Transverse velocity) – वृत्ताकार पथ पर गतिमान किसी वस्तु का रैखिक वेग।
RRB ALP Tier-I (29/08/2018) Afternoon
1627
Which of the following quantities remains constant and does NOT change from place to
place?
निम्नलिखित में से कौन सी राशि स्थिर रहती है और एक स्थान से दूसरे स्थान पर नहीं बदलती
है?
✅ Correct Answer: (A)
The mass of the body remains constant at every place while the weight of the body changes at
every place as it depends on gravity.
Fundamental quantities: Basic quantities which do not depend on any other factor and do not
change with place. Examples: Length, mass, time, temperature, electric current, amount of
substance.
Derived quantities: A combination of two or more Fundamental quantities which changes with
the place. Examples: Force, density, volume and momentum.
पिंड का द्रव्यमान हर जगह स्थिर रहता है जबकि पिंड का भार हर जगह बदलता रहता है क्योंकि यह
गुरुत्वाकर्षण पर निर्भर करता है।
मूल राशियाँ (Fundamental quantities): मूल राशियाँ जो किसी अन्य कारक पर निर्भर नहीं करती हैं
और स्थान के साथ नहीं बदलती हैं। उदाहरण: लंबाई, द्रव्यमान, समय, तापमान, विद्युत प्रवाह,
पदार्थ की मात्रा।
व्युत्पन्न राशियाँ (Derived quantities): दो या दो से अधिक मूल मात्राओं का संयोजन जो स्थान के
साथ बदलता है। उदाहरण: बल, घनत्व, आयतन और संवेग।
RRB ALP Tier-I (30/08/2018) Morning
1628
A high jumper runs for a while before taking a high jump so that the inertia of ….
helps him take the long jump.
एक हाई जम्पर (ऊंची कूद लगाने वाला) ऊंची छलांग लगाने से पहले कुछ देर दौड़ता है ताकि ….
का जड़त्व उसे लंबी छलांग लगाने में मदद करे।
✅ Correct Answer: (A)
Inertia of motion – Tendency of a body to resist any change in its condition of uniform
motion.
Example – A person jumps out from a train and falls forward, the water that flows from the
tap, Car with the engine off still moves due to inertia of motion.
The high jumper runs before the jump to build up inertia of motion which helps in taking a
long jump.
गति का जड़त्व – किसी पिंड की एक समान गति की स्थिति में किसी भी परिवर्तन का विरोध करने की
प्रवृत्ति।
उदाहरण – एक व्यक्ति ट्रेन से बाहर कूदता है और आगे की ओर गिर जाता है, नल से बहने वाला पानी,
इंजन बंद होने पर भी कार गति के जड़त्व के कारण चलती है।
हाई जम्पर कूदने से पहले गति का जड़त्व बनाने के लिए दौड़ता है जो लंबी छलांग लगाने में मदद
करता है।