The audible range of sound for human beings extends from about:
मनुष्यों के लिए ध्वनि की श्रव्य सीमा लगभग किससे किससे तक होती है:
✅ Correct Answer: (A)
Infrasonic sounds have frequency less than 20 Hz. Example — sound produced by earthquakes,
thunder, volcanoes. Humans cannot hear it but elephants and whales can.
Ultrasonic sounds have frequency more than 20,000 Hz. Example — audible range of dogs, cats,
moths and mice extends into ultrasound frequencies.
अवश्रव्य ध्वनि (Infrasonic) की आवृत्ति 20 Hz से कम होती है। उदाहरण — भूकंप, गर्जन,
ज्वालामुखी से उत्पन्न ध्वनि। मनुष्य इसे नहीं सुन सकते परंतु हाथी और व्हेल सुन सकते हैं।
पराश्रव्य ध्वनि (Ultrasonic) की आवृत्ति 20,000 Hz से अधिक होती है। उदाहरण — कुत्ते, बिल्ली,
पतंगे और चूहे इस सीमा तक सुन सकते हैं।
RRB NTPC CBT-II (17/06/2022) Shift 2
1060
Through which of the following mediums can sound NOT travel?
निम्नलिखित में से किस माध्यम से ध्वनि यात्रा नहीं कर सकती?
✅ Correct Answer: (B)
Sound waves are longitudinal waves that travel through a medium like air or water; speed of
sound in air is 343 m/s.
Speed of sound is independent of frequency, is maximum in solids and minimum in gases.
Sound cannot travel through vacuum as there are no particles to vibrate.
ध्वनि तरंगें अनुदैर्ध्य तरंगें हैं जो वायु या जल जैसे माध्यम से यात्रा करती हैं; वायु में
ध्वनि की चाल 343 मी/से है।
ध्वनि की चाल आवृत्ति से स्वतंत्र होती है, ठोस में अधिकतम और गैस में न्यूनतम होती है।
निर्वात में कोई कण न होने के कारण ध्वनि यात्रा नहीं कर सकती।
RRB NTPC CBT-I (28/12/2020) Morning
1061
The persistence of sound in an auditorium is the result of repeated reflections of
sound and is called _____.
सभागार में ध्वनि की निरंतरता ध्वनि के बार-बार परावर्तन का परिणाम होती है और इसे _____
कहा जाता है।
✅ Correct Answer: (D)
Reverberation is used to find out the depth of the sea and the position of objects located
in water.
Intensity refers to the magnitude/strength of a physical quantity at a given location.
Ranging measures distance or slant range from observer to target; vibration is rapid linear
motion of a particle about an equilibrium position.
रीवर्बरेशन का उपयोग समुद्र की गहराई तथा जल में स्थित वस्तुओं की स्थिति ज्ञात करने में किया
जाता है।
तीव्रता किसी स्थान पर भौतिक राशि की मात्रा या शक्ति को दर्शाती है।
रेंजिंग प्रेक्षक से लक्ष्य तक की दूरी मापने की तकनीक है; कंपन साम्यावस्था के इर्द-गिर्द किसी
कण की तीव्र रैखिक गति है।
RRB NTPC CBT-I (16/01/2021) Morning
1062
A microphone converts:
माइक्रोफोन किसे किसमें परिवर्तित करता है:
✅ Correct Answer: (A)
Microphones are a transducer — a device that converts energy from one form to another; a
speaker does the reverse (electrical to sound).
Electric generator: mechanical → electrical. Cell/Battery: chemical → electrical. Electric
Iron: electrical → heat.
Solar cells: light → electrical. Electric Bulb: electrical → light. Gas stove: chemical →
heat. Solar water heater: light → heat.
माइक्रोफोन एक ट्रांसड्यूसर है — एक ऊर्जा रूप को दूसरे में बदलने वाला उपकरण; स्पीकर इसका
उल्टा कार्य करता है (विद्युत से ध्वनि)।
विद्युत जनरेटर: यांत्रिक → विद्युत। सेल/बैटरी: रासायनिक → विद्युत। इलेक्ट्रिक आयरन: विद्युत
→ ऊष्मा।
सौर सेल: प्रकाश → विद्युत। बल्ब: विद्युत → प्रकाश। गैस स्टोव: रासायनिक → ऊष्मा। सौर जल तापक:
प्रकाश → ऊष्मा।
RRB NTPC CBT-I (21/01/2021) Evening
1063
The speed of sound _______ as it passes from solid to gaseous medium.
जब ध्वनि ठोस से गैसीय माध्यम में जाती है तो उसकी चाल _______।
✅ Correct Answer: (D)
Sound travels slowest through gases, faster through liquids, and fastest through solids, so
speed decreases from solid to gas.
Temperature also affects speed: molecules at higher temperature vibrate faster, letting
sound travel more quickly.
ध्वनि गैसों में सबसे धीमी, द्रवों में तेज और ठोसों में सबसे तेज गति से चलती है, अतः ठोस से
गैस में जाने पर चाल घटती है।
तापमान भी चाल को प्रभावित करता है: उच्च तापमान पर अणु तेज़ी से कंपन करते हैं, जिससे ध्वनि
तेज़ी से यात्रा करती है।
RRB NTPC CBT-I (23/01/2021) Evening
1064
We hear others speaking to us from adjacent rooms due to _______ of sound waves.
हम पास के कमरों से बोलने वाले लोगों को ध्वनि तरंगों के _______ के कारण सुन पाते हैं।
✅ Correct Answer: (C)
Diffraction is the bending of waves around obstacles/openings, which is why sound bends
around corners or through gaps under doors.
Echo is repeated sound sent back off a surface; reflection is coming back of sound/light;
refraction is change in direction on passing between media.
विवर्तन तरंगों का बाधाओं/खुलेपन के चारों ओर मुड़ना है, जिस कारण ध्वनि दरवाज़ों के नीचे से या
मोड़ों से गुजर जाती है।
प्रतिध्वनि किसी सतह से वापस आने वाली ध्वनि है; परावर्तन ध्वनि/प्रकाश का वापस लौटना है;
अपवर्तन माध्यम बदलने पर दिशा में परिवर्तन है।
RRB NTPC CBT-I (25/01/2021) Morning
1065
For communication, elephants can make noise as loud as 103 decibels but they often
use low frequency sound, some of which is passed through the ground. These sounds are called:
संचार के लिए हाथी 103 डेसिबल तक तेज़ आवाज़ निकाल सकते हैं परंतु वे अक्सर निम्न
आवृत्ति की ध्वनि का उपयोग करते हैं, जिसका कुछ भाग ज़मीन से होकर गुजरता है। इन ध्वनियों को कहा जाता है:
✅ Correct Answer: (B)
Infrasound refers to sound waves below 20 Hz, below the lower limit of human hearing;
elephants use it for long-distance communication through the ground.
Other loud animals (dB): Sperm Whales 233, Mantis Shrimp 200, Blue Whales 188, Greater
Bulldog Bat 140, Howler Monkey 140, Elephant Seal 126, African Cicadas 120, N. American
Bullfrog 119.
अवश्रव्य ध्वनि 20 Hz से कम आवृत्ति की तरंगें हैं, जो मानव श्रवण की निम्न सीमा से नीचे हैं;
हाथी इसे ज़मीन के माध्यम से लंबी दूरी के संचार हेतु उपयोग करते हैं।
अन्य तेज़ आवाज़ वाले जीव (डेसिबल में): स्पर्म व्हेल 233, मैंटिस श्रिम्प 200, ब्लू व्हेल 188,
ग्रेटर बुलडॉग बैट 140, हाउलर मंकी 140, एलिफेंट सील 126, अफ्रीकी सिकाडा 120, उत्तर अमेरिकी
बुलफ्रॉग 119।
RRB NTPC CBT-I (11/02/2021) Morning
1066
What is the speed of sound in air?
वायु में ध्वनि की चाल कितनी होती है?
✅ Correct Answer: (A)
Speed of sound in air at 20°C is approximately 343 m/s; at 0°C it is 331 m/s.
Speed of sound in medium: Solids > Liquids > Gases. Speed of light is 3 ×
10&sup8; m/s.
20°C पर वायु में ध्वनि की चाल लगभग 343 मी/से है; 0°C पर यह 331 मी/से है।
माध्यम में ध्वनि की चाल: ठोस > द्रव > गैस। प्रकाश की चाल 3 × 10&sup8; मी/से है।
RRB NTPC CBT-I (27/02/2021) Morning
1067
Sonar is a device that uses ultrasonic waves to measure the distance, direction and
speed of objects_______.
सोनार एक उपकरण है जो पराश्रव्य तरंगों का उपयोग करके वस्तुओं की दूरी, दिशा और गति
मापने के लिए _______ प्रयोग किया जाता है।
✅ Correct Answer: (D)
SONAR (Sound Navigation and Ranging) is used by submarines/ships for navigation, object
detection, communication, fish finding, depth sounding, mapping the sea bottom.
An acoustic projector produces a sound wave reflected back by the target; RADAR is used for
objects in air, not underwater.
सोनार (Sound Navigation and Ranging) का उपयोग पनडुब्बियों/जहाज़ों द्वारा नौवहन, वस्तु पहचान,
संचार, मछली पकड़ने, गहराई मापने तथा समुद्र तल की मैपिंग हेतु किया जाता है।
ध्वनि प्रक्षेपक एक तरंग उत्पन्न करता है जो लक्ष्य से परावर्तित होती है; रडार का उपयोग वायु
में वस्तुओं के लिए होता है, पानी के भीतर के लिए नहीं।
RRB NTPC CBT-I (08/03/2021) Morning
1068
The way the brain interprets the frequency of an emitted sound is called the
________.
जिस तरीके से मस्तिष्क किसी उत्सर्जित ध्वनि की आवृत्ति की व्याख्या करता है उसे
________ कहते हैं।
✅ Correct Answer: (C)
Pitch of a sound depends on its frequency: faster vibration means higher frequency and
higher pitch.
Amplitude is the measure of the height of a wave, corresponding to loudness of sound.
ध्वनि का तारत्व (पिच) उसकी आवृत्ति पर निर्भर करता है: कंपन जितना तेज़ होगा, आवृत्ति व तारत्व
उतना ही अधिक होगा।
आयाम तरंग की ऊँचाई का मापन है, जो ध्वनि की प्रबलता से संबंधित है।
RRB NTPC CBT-I (27/03/2021) Evening
1069
What is the relation between the frequency f, wavelength λ and speed v of the
sound?
ध्वनि की आवृत्ति f, तरंगदैर्घ्य λ और चाल v के बीच क्या संबंध है?
✅ Correct Answer: (A)
The speed (velocity) of a wave equals the product of its wavelength and frequency: v =
λf.
SI units: frequency (f) — hertz (Hz), wavelength (λ) — metre (m), velocity (v) —
metre per second (m/s).
किसी तरंग की चाल उसके तरंगदैर्घ्य और आवृत्ति के गुणनफल के बराबर होती है: v = λf।
SI मात्रक: आवृत्ति (f) — हर्ट्ज़ (Hz), तरंगदैर्घ्य (λ) — मीटर (m), वेग (v) — मीटर
प्रति सेकंड (m/s)।
RRB JE 23/05/2019 (Morning)
1070
When a sound producing source moves with a speed higher than the sound, shock waves
are produced in air. What is the very sharp and loud sound produced by these shock waves called?
जब कोई ध्वनि उत्पन्न करने वाला स्रोत ध्वनि से अधिक गति से गति करता है, तो वायु में
शॉक तरंगें उत्पन्न होती हैं। इन शॉक तरंगों से उत्पन्न बहुत तीव्र और तेज़ ध्वनि को क्या कहा जाता है?
✅ Correct Answer: (C)
Sonic boom is an impulsive sound similar to thunder caused by an object moving faster than
sound (about 750 mph), creating shock waves. Examples: bullet from a gun, aircraft at low
altitude.
सोनिक बूम गर्जन जैसी एक आवेगी ध्वनि है जो ध्वनि से तेज़ (लगभग 750 मील/घंटा) गति से चलने वाली
वस्तु द्वारा उत्पन्न शॉक तरंगों से बनती है। उदाहरण: बंदूक की गोली, निम्न ऊँचाई पर उड़ने वाला
विमान।
अवश्रव्य ध्वनि: 20 Hz से कम (भूकंप, ज्वालामुखी)। श्रव्य ध्वनि: 20 Hz–20,000 Hz। पराश्रव्य
ध्वनि: 20 kHz से अधिक (चमगादड़, चूहे, डॉल्फिन)।
RRB JE 23/05/2019 (Afternoon)
1071
Which of the following determines the loudness or softness of the sound?
निम्नलिखित में से कौन ध्वनि की प्रबलता या मृदुता निर्धारित करता है?
✅ Correct Answer: (C)
Loudness measures how strong/intense a sound is; it depends on sound intensity, distance
from source, environment and frequency content, but amplitude is what determines
loudness/softness.
Frequency is periodic oscillations per unit time (SI unit: Hz); wave velocity is distance
travelled per unit time.
प्रबलता यह मापती है कि ध्वनि कितनी तीव्र है; यह ध्वनि की तीव्रता, स्रोत से दूरी, वातावरण व
आवृत्ति पर निर्भर करती है, परंतु प्रबलता/मृदुता आयाम से निर्धारित होती है।
आवृत्ति प्रति इकाई समय में आवर्ती दोलनों की संख्या है (SI मात्रक: हर्ट्ज़); तरंग वेग प्रति
इकाई समय तय की गई दूरी है।
RRB JE 24/05/2019 (Afternoon)
1072
Which of the following is the time taken for one complete oscillation of a sound wave
in the density of the medium?
माध्यम के घनत्व में ध्वनि तरंग के एक पूर्ण दोलन के लिए लिया गया समय निम्नलिखित में से
क्या है?
✅ Correct Answer: (D)
Time period (T) is the time taken for one complete oscillation of a wave; it is the
reciprocal of frequency: T = 1/f.
Wavelength (λ) is the horizontal distance between two adjacent crests/troughs;
relation: v = nλ.
आवर्तकाल (T) किसी तरंग के एक पूर्ण दोलन में लिया गया समय है; यह आवृत्ति का व्युत्क्रम है: T
= 1/f।
तरंगदैर्घ्य (λ) दो निकटवर्ती शिखरों/गर्तों के बीच की क्षैतिज दूरी है; संबंध: v =
nλ।
RRB JE 24/05/2019 (Evening)
1073
To hear a distinct echo, what is the minimum time interval required between the
original sound and the echo?
स्पष्ट प्रतिध्वनि सुनने के लिए मूल ध्वनि तथा प्रतिध्वनि के बीच न्यूनतम कितना समय
अंतराल आवश्यक है?
✅ Correct Answer: (A)
Sound sensation persists in the brain for about 0.1 second, so a distinct echo needs at
least this time gap between original sound and its reflection.
Minimum obstacle distance for a distinct echo is 17.2 m; multiple echoes result from
successive reflections. SI unit of sound intensity is decibel (dB).
ध्वनि की अनुभूति मस्तिष्क में लगभग 0.1 सेकंड तक बनी रहती है, इसलिए स्पष्ट प्रतिध्वनि के लिए
मूल ध्वनि व परावर्तित ध्वनि के बीच कम से कम इतना अंतराल आवश्यक है।
स्पष्ट प्रतिध्वनि के लिए बाधा की न्यूनतम दूरी 17.2 मी है; बार-बार प्रतिध्वनि क्रमिक
परावर्तनों के कारण होती है। ध्वनि तीव्रता का SI मात्रक डेसिबल (dB) है।
RRB JE 25/05/2019 (Morning)
1074
Which Greek letter denotes wavelength?
तरंगदैर्घ्य को कौन सा ग्रीक अक्षर दर्शाता है?
✅ Correct Answer: (C)
Wavelength is the difference between corresponding points of two consecutive waves — crest
to crest/trough to trough (transverse), or compression to compression/rarefaction to
rarefaction (longitudinal).
Mu (µ) represents coefficient of friction/magnetic permeability; Omega (ω)
measures angular displacement per unit time; Epsilon (ε) is dielectric constant.
तरंगदैर्घ्य दो क्रमागत तरंगों के संगत बिंदुओं के बीच का अंतर है — अनुप्रस्थ तरंग में शिखर से
शिखर/गर्त से गर्त, अनुदैर्ध्य तरंग में संपीडन से संपीडन/विरलन से विरलन।
म्यू (µ) घर्षण गुणांक/चुंबकीय पारगम्यता दर्शाता है; ओमेगा (ω) कोणीय विस्थापन
प्रति इकाई समय मापता है; एप्सिलॉन (ε) परावैद्युतांक है।
RRB JE 26/05/2019 (Morning)
1075
What is the valley (lowest portion) of a sound wave called?
ध्वनि तरंग के सबसे निचले भाग (घाटी) को क्या कहा जाता है?
✅ Correct Answer: (D)
A crest is the highest part of a wave; a trough is the lowest point or valley of a wave.
Wavelength is the distance between two nearest crests or troughs; amplitude is the maximum
displacement from the mean position.
शिखर तरंग का सबसे ऊँचा भाग है; गर्त तरंग का सबसे निचला बिंदु या घाटी है।
तरंगदैर्घ्य दो निकटतम शिखरों या गर्तों के बीच की दूरी है; आयाम माध्य स्थिति से अधिकतम
विस्थापन है।
RRB JE 26/05/2019 (Evening)
1076
What is the relation between the frequency v and the time period T of a sound wave?
ध्वनि तरंग की आवृत्ति v तथा आवर्तकाल T के बीच क्या संबंध है?
✅ Correct Answer: (C)
Frequency describes the number of waves passing a fixed point per unit time (unit: Hz); time
period is time taken for one complete vibration cycle (unit: second).
Frequency and time period are reciprocals: v = 1/T.
आवृत्ति किसी निश्चित बिंदु से प्रति इकाई समय गुजरने वाली तरंगों की संख्या दर्शाती है
(मात्रक: हर्ट्ज़); आवर्तकाल एक पूर्ण कंपन चक्र में लगने वाला समय है (मात्रक: सेकंड)।
आवृत्ति और आवर्तकाल एक-दूसरे के व्युत्क्रम हैं: v = 1/T।
RRB JE 27/05/2019 (Morning)
1077
What is the repeated reflection of sound from the walls of a big hall that results in
persistence of sound called?
किसी बड़े हॉल की दीवारों से ध्वनि के बार-बार परावर्तन के कारण ध्वनि की निरंतरता को
क्या कहा जाता है?
✅ Correct Answer: (D)
Reverberation is the persistence of sound caused by multiple reflections from the walls of a
big hall or auditorium; sound-absorbent materials like fibreboard, rough plaster or
draperies reduce it.
Pitch varies with frequency of vibration; note is sound from a mixture of several
frequencies; echo is reflected sound arriving after the direct sound.
रीवर्बरेशन किसी बड़े हॉल या सभागार की दीवारों से बार-बार परावर्तन के कारण ध्वनि की निरंतरता
है; इसे कम करने हेतु फाइबरबोर्ड, खुरदरा प्लास्टर या पर्दे जैसी ध्वनि-अवशोषक सामग्री उपयोग की
जाती है।
तारत्व कंपन की आवृत्ति के साथ बदलता है; नोट कई आवृत्तियों के मिश्रण से बनी ध्वनि है;
प्रतिध्वनि मूल ध्वनि के बाद पहुँचने वाली परावर्तित ध्वनि है।
RRB JE 27/05/2019 (Evening)
1078
Which of these is the characteristic of sound which enables us to distinguish one
sound from another having the same pitch and loudness?
ध्वनि की कौन सी विशेषता हमें समान तारत्व व प्रबलता वाली दो ध्वनियों में अंतर करने में
सक्षम बनाती है?
✅ Correct Answer: (D)
Timbre (quality) of sound lets us distinguish between two sounds of the same pitch and
loudness produced by different instruments or voices.
Sound travels fastest in solids, slower in liquids, slowest in gases; its intensity is
expressed in decibels. Amplitude is maximum displacement from mean position;
pitch/shrillness depends on frequency.
ध्वनि की गुणता (टिम्बर) हमें विभिन्न वाद्ययंत्रों या आवाज़ों से उत्पन्न समान तारत्व व
प्रबलता वाली दो ध्वनियों में अंतर करने में सक्षम बनाती है।
ध्वनि ठोस में सबसे तेज़, द्रव में धीमी और गैस में सबसे धीमी चलती है; इसकी तीव्रता डेसिबल में
व्यक्त की जाती है। आयाम माध्य स्थिति से अधिकतम विस्थापन है; तारत्व/तीक्ष्णता आवृत्ति पर
निर्भर करती है।
RRB JE 28/05/2019 (Afternoon)
1079
Which of the following is an example of sound-absorbent material used to reduce
reverberation?
रीवर्बरेशन को कम करने के लिए उपयोग की जाने वाली ध्वनि-अवशोषक सामग्री का उदाहरण
निम्नलिखित में से कौन सा है?
✅ Correct Answer: (B)
Sound absorption is the loss of sound energy when waves contact an absorbent material such
as ceilings, walls or floors; compressed fibre board is a porous absorbent material commonly
used in auditoriums.
Reverberation is the collection of reflected sounds from surfaces in an enclosure.
ध्वनि अवशोषण छत, दीवारों या फर्श जैसी अवशोषक सामग्री के संपर्क में आने पर ध्वनि ऊर्जा की
हानि है; संपीडित फाइबर बोर्ड एक छिद्रयुक्त अवशोषक सामग्री है जो सभागारों में आम तौर पर
प्रयुक्त होती है।
रीवर्बरेशन किसी संलग्न स्थान की सतहों से परावर्तित ध्वनियों का समूह है।
RRB JE 29/05/2019 (Evening)
1080
Which of the following is the sound of a single frequency?
निम्नलिखित में से किस ध्वनि की आवृत्ति एकल होती है?
✅ Correct Answer: (C)
A tone is a musical, vocal or melodious sound of a single frequency, defined by pitch,
quality and intensity.
A note is produced by a mixture of frequencies; noise is unwanted disruptive signal; timbre
differentiates between two different sounds.
टोन एकल आवृत्ति की संगीतमय, स्वरात्मक या मधुर ध्वनि है, जिसे तारत्व, गुणता व तीव्रता से
परिभाषित किया जाता है।
नोट कई आवृत्तियों के मिश्रण से उत्पन्न होता है; शोर एक अवांछित विघटनकारी संकेत है; टिम्बर दो
भिन्न ध्वनियों में अंतर करता है।
RRB JE 30/05/2019 (Morning)
1081
What is the distance between two consecutive compressions or two consecutive
rarefactions called?
दो क्रमागत संपीडनों या दो क्रमागत विरलनों के बीच की दूरी को क्या कहा जाता है?
✅ Correct Answer: (B)
Wavelength (λ, SI unit: metre) is the distance between two successive crests/troughs,
or two consecutive compressions/rarefactions in a longitudinal wave.
Frequency (f, Hz): vibrations per second. Amplitude (A, m): maximum displacement from
equilibrium. Wave velocity (v, m/s): product of wavelength and frequency.
तरंगदैर्घ्य (λ, SI मात्रक: मीटर) दो क्रमागत शिखरों/गर्तों, या अनुदैर्ध्य तरंग में दो
क्रमागत संपीडनों/विरलनों के बीच की दूरी है।
आवृत्ति (f, Hz): प्रति सेकंड कंपन। आयाम (A, मी): साम्यावस्था से अधिकतम विस्थापन। तरंग वेग
(v, मी/से): तरंगदैर्घ्य व आवृत्ति का गुणनफल।
RRB JE 31/05/2019 (Afternoon)
1082
Which of the following is the number of oscillations per unit time of a sound wave?
ध्वनि तरंग में प्रति इकाई समय दोलनों की संख्या निम्नलिखित में से कौन सी है?
✅ Correct Answer: (B)
Frequency's SI unit is hertz (Hz); a frequency of 1 Hz means one oscillation per second —
the number of oscillations per unit time.
Amplitude (symbol A, unit metre) is the maximum displacement of a vibrating point;
wavelength (symbol λ, unit metre) is the distance between two successive
crests/troughs.
आवृत्ति का SI मात्रक हर्ट्ज़ (Hz) है; 1 Hz का अर्थ है प्रति सेकंड एक दोलन — यानी प्रति इकाई
समय दोलनों की संख्या।
आयाम (प्रतीक A, मात्रक मीटर) किसी कंपन बिंदु का अधिकतम विस्थापन है; तरंगदैर्घ्य (प्रतीक
λ, मात्रक मीटर) दो क्रमागत शिखरों/गर्तों के बीच की दूरी है।
RRB JE 01/06/2019 (Morning)
1083
When sound hits a solid surface what will happen?
जब ध्वनि किसी ठोस सतह से टकराती है तो क्या होता है?
✅ Correct Answer: (D)
Like light, sound gets reflected at the surface of a solid or liquid; in practice, part of
the sound energy is absorbed and part is reflected.
Sound is produced by vibrating objects and needs a medium (solid, liquid or gas) to be
transmitted; SI unit of sound is decibel (dB).
प्रकाश की तरह, ध्वनि भी किसी ठोस या द्रव की सतह से परावर्तित होती है; व्यवहार में, ध्वनि
ऊर्जा का एक भाग अवशोषित तथा एक भाग परावर्तित होता है।
ध्वनि कंपायमान वस्तुओं द्वारा उत्पन्न होती है और इसके संचरण हेतु माध्यम (ठोस, द्रव या गैस)
आवश्यक है; ध्वनि का SI मात्रक डेसिबल (dB) है।
RRB JE 01/06/2019 (Afternoon)
1084
Ultrasound is used to detect_____ in metal blocks.
धातु के ब्लॉकों में _____ का पता लगाने के लिए पराश्रव्य ध्वनि का उपयोग किया जाता है।
✅ Correct Answer: (A)
Ultrasound uses sound waves to make images of organs/tissues/structures; in industry, it is
used for non-destructive testing to detect cracks and flaws in metal blocks and other
structures.
MRI produces detailed 3D anatomical images; CT scan uses X-rays and computer technology to
image inside the body.
पराश्रव्य ध्वनि अंगों/ऊतकों/संरचनाओं की छवियाँ बनाने हेतु ध्वनि तरंगों का उपयोग करती है;
उद्योग में इसका उपयोग धातु के ब्लॉकों व अन्य संरचनाओं में दरारें व खामियाँ खोजने के लिए
अविनाशी परीक्षण (Non-destructive testing) में किया जाता है।
MRI विस्तृत त्रि-आयामी शारीरिक छवियाँ बनाती है; CT स्कैन शरीर के भीतर की छवियों हेतु एक्स-रे
व कंप्यूटर तकनीक का उपयोग करता है।
RRB JE 30/05/2019 (Afternoon)
1085
When the temperature of the medium increases, the speed of sound goes ________.
जब माध्यम का तापमान बढ़ता है, तो ध्वनि की चाल ________ है।
✅ Correct Answer: (D)
Speed of sound is directly proportional to the square root of the medium's temperature: V
∝ √T.
Speed of sound in media at 25°C — maximum: Aluminium (6420 m/s); minimum: Sulphur dioxide
(213 m/s).
ध्वनि की चाल माध्यम के तापमान के वर्गमूल के समानुपाती होती है: V ∝ √T।
25°C पर विभिन्न माध्यमों में ध्वनि की चाल — अधिकतम: एल्युमिनियम (6420 मी/से); न्यूनतम: सल्फर
डाईऑक्साइड (213 मी/से)।
RPF Constable 20/01/2019 (Afternoon)
1086
In which of the following media does sound travel the fastest?
निम्नलिखित में से किस माध्यम में ध्वनि सबसे तेज़ यात्रा करती है?
✅ Correct Answer: (D)
Sound travels fastest in solids because molecules are much closer together than in a liquid
or gas, letting sound waves pass through more quickly.
Sound cannot travel in vacuum, as no particles are present to vibrate. Order: Solids >
Liquids > Gases.
ध्वनि ठोस में सबसे तेज़ चलती है क्योंकि ठोस माध्यम में अणु द्रव या गैस की तुलना में अधिक पास
होते हैं, जिससे ध्वनि तरंगें तेज़ी से गुजरती हैं।
निर्वात में कोई कण न होने के कारण ध्वनि यात्रा नहीं कर सकती। क्रम: ठोस > द्रव > गैस।
RRB Group D 17/09/2018 (Morning)
1087
Sound waves with frequencies below the audible range are called:
श्रव्य सीमा से नीचे की आवृत्ति वाली ध्वनि तरंगों को कहा जाता है:
अवश्रव्य ध्वनि की आवृत्ति 20 Hz से कम होती है — उदाहरण: भूकंप, गैंडा, व्हेल, हाथी।
श्रव्य तरंगें: 20 Hz–20,000 Hz (मानव श्रवण)। पराश्रव्य: 20,000 Hz से अधिक (डॉल्फिन, चमगादड़,
पोरपॉइज)। पराध्वनिक गति: जब वस्तु की गति ध्वनि की गति से अधिक हो (गोली, जेट, विमान)।
RRB Group D 18/09/2018 (Morning)
1088
The region of high density of particles in the medium during propagation of sound:
ध्वनि के संचरण के दौरान माध्यम में कणों के उच्च घनत्व वाले क्षेत्र को कहते हैं:
✅ Correct Answer: (D)
As a longitudinal wave propagates, medium density varies between maximum and minimum.
Maximum density is called compression; minimum density is called rarefaction.
जब अनुदैर्ध्य तरंग संचरित होती है तो माध्यम का घनत्व अधिकतम से न्यूनतम के बीच बदलता है।
अधिकतम घनत्व को संपीडन तथा न्यूनतम घनत्व को विरलन कहते हैं।
RRB Group D 20/09/2018 (Morning)
1089
The speed of sound in air at 25°C is _______.
25°C पर वायु में ध्वनि की चाल _______ है।
✅ Correct Answer: (D)
Sound is a mechanical wave needing a material medium; it travels slowest in gases, faster in
liquids, fastest in solids.
Speed of sound in air at 25°C is approximately 346 m/s; at 0°C it is 331 m/s.
ध्वनि एक यांत्रिक तरंग है जिसे संचरण हेतु भौतिक माध्यम आवश्यक है; यह गैसों में सबसे धीमी,
द्रवों में तेज़ और ठोसों में सबसे तेज़ चलती है।
25°C पर वायु में ध्वनि की चाल लगभग 346 मी/से है; 0°C पर यह 331 मी/से है।
RRB Group D 20/09/2018 (Morning)
1090
To hear distinct echoes, the minimum distance of the obstacle from the source of
sound must be _________.
स्पष्ट प्रतिध्वनि सुनने के लिए ध्वनि स्रोत से बाधा की न्यूनतम दूरी _________ होनी
चाहिए।
✅ Correct Answer: (A)
Sound sensation persists in the brain for about 0.1 second, so a distinct echo needs at
least a 0.1 s gap between direct and reflected sound.
At sound speed ~344 m/s, sound must travel 344 × 0.1 = 34.4 m total (to obstacle and
back), so minimum obstacle distance = 34.4/2 = 17.2 m. An echo results from reflection.
ध्वनि की अनुभूति मस्तिष्क में लगभग 0.1 सेकंड तक बनी रहती है, इसलिए स्पष्ट प्रतिध्वनि हेतु
मूल व परावर्तित ध्वनि के बीच कम से कम 0.1 सेकंड का अंतराल आवश्यक है।
लगभग 344 मी/से चाल पर, ध्वनि को कुल 344 × 0.1 = 34.4 मी (बाधा तक व वापस) तय करना होगा,
अतः न्यूनतम दूरी = 34.4/2 = 17.2 मी। प्रतिध्वनि परावर्तन के कारण होती है।
RRB Group D 20/09/2018 (Evening)
1091
Echoes are heard due to the phenomenon of ___________.
प्रतिध्वनि ___________ की घटना के कारण सुनाई देती है।
✅ Correct Answer: (A)
Echo is a repeated sound caused by reflection of sound waves from a surface; applications
include measuring depth/height, distance, and medical purposes.
Refraction is bending of a sound wave due to change in wave speed; interference occurs when
two or more waves interact to form a new wave.
प्रतिध्वनि किसी सतह से ध्वनि तरंगों के परावर्तन के कारण उत्पन्न बार-बार आने वाली ध्वनि है;
इसके अनुप्रयोग हैं — गहराई/ऊँचाई मापना, दूरी मापना, तथा चिकित्सा प्रयोजन।
अपवर्तन तरंग की गति में बदलाव के कारण दिशा में परिवर्तन है; व्यतिकरण तब होता है जब दो या
अधिक तरंगें परस्पर क्रिया कर एक नई तरंग बनाती हैं।
RRB Group D 22/09/2018 (Evening)
1092
Sound produced by a radio increases by ____________.
रेडियो द्वारा उत्पन्न ध्वनि ____________ करने से बढ़ती है।
✅ Correct Answer: (B)
Loudness of a sound is directly proportional to the square of amplitude — larger amplitude
means louder sound; loudness is measured in decibels (dB).
Amplitude is the maximum displacement of a vibrating point from equilibrium, equal to half
the length of the vibration path; SI unit is metre (m).
ध्वनि की प्रबलता आयाम के वर्ग के समानुपाती होती है — आयाम जितना बड़ा होगा, ध्वनि उतनी ही
तेज़ होगी; प्रबलता डेसिबल (dB) में मापी जाती है।
आयाम साम्यावस्था से किसी कंपन बिंदु का अधिकतम विस्थापन है, जो कंपन पथ की लंबाई का आधा होता
है; इसका SI मात्रक मीटर (m) है।
RRB Group D 22/09/2018 (Evening)
1093
Which of the following are Mechanical waves?
निम्नलिखित में से कौन सी यांत्रिक तरंगें हैं?
✅ Correct Answer: (D)
A wave is a disturbance in a medium carrying energy without net movement of particles;
mechanical waves are oscillations of matter transferring energy through a medium.
Types: longitudinal (motion parallel to energy transfer) and transverse (motion at 90°
to energy transfer). Examples: water waves, seismic waves, sound waves.
Electromagnetic waves (microwaves, X-rays, radio waves, UV) arise from vibrations between
electric and magnetic fields and can travel through vacuum.
तरंग किसी माध्यम में एक विक्षोभ है जो कणों की शुद्ध गति के बिना ऊर्जा का संचरण करती है;
यांत्रिक तरंगें पदार्थ के दोलन हैं जो माध्यम से ऊर्जा स्थानांतरित करती हैं।
प्रकार: अनुदैर्ध्य (गति ऊर्जा संचरण के समांतर) व अनुप्रस्थ (गति ऊर्जा संचरण से 90° पर)।
उदाहरण: जल तरंगें, भूकंपीय तरंगें, ध्वनि तरंगें।
विद्युतचुंबकीय तरंगें (माइक्रोवेव, एक्स-रे, रेडियो तरंगें, पराबैंगनी) विद्युत व चुंबकीय
क्षेत्रों के बीच कंपन से उत्पन्न होती हैं और निर्वात में यात्रा कर सकती हैं।
RRB Group D 23/09/2018 (Afternoon)
1094
Propagation of sound is possible only if there is a:
ध्वनि का संचरण केवल तभी संभव है जब वहाँ हो:
✅ Correct Answer: (B)
Sound waves are mechanical waves that require a medium — solid, liquid, or gas — to vibrate
and transmit energy.
They cannot propagate in a vacuum, since there are no particles to vibrate and carry the
disturbance.
ध्वनि तरंगें यांत्रिक तरंगें हैं जिन्हें कंपन व ऊर्जा संचरण हेतु माध्यम — ठोस, द्रव या गैस —
आवश्यक है।
ये निर्वात में संचरित नहीं हो सकतीं, क्योंकि वहाँ विक्षोभ ले जाने के लिए कोई कण नहीं होते।
RRB Group D 23/09/2018 (Evening)
1095
Which of the following animals do NOT produce infrasound?
निम्नलिखित में से कौन सा जानवर अवश्रव्य ध्वनि उत्पन्न नहीं करता?
✅ Correct Answer: (B)
Dolphins communicate using ultrasonic whistle sounds with frequencies greater than 20,000
Hz, not infrasound.
Infrasound refers to sound waves below 20 Hz, undetectable by humans; whales, elephants and
rhinoceroses use infrasound for communication.
डॉल्फिन 20,000 Hz से अधिक आवृत्ति की पराश्रव्य सीटी ध्वनियों के माध्यम से संवाद करती हैं,
अवश्रव्य ध्वनि से नहीं।
अवश्रव्य ध्वनि 20 Hz से कम आवृत्ति की तरंगें हैं, जिन्हें मनुष्य पहचान नहीं सकते; व्हेल,
हाथी और गैंडा संचार हेतु अवश्रव्य ध्वनि का उपयोग करते हैं।
RRB Group D 23/09/2018 (Evening)
1096
________ play games by generating ultrasound.
________ पराश्रव्य ध्वनि उत्पन्न करके खेल खेलते हैं।
✅ Correct Answer: (D)
Sound waves of frequency greater than 20 kHz are ultrasonic; bats, praying mantis, dolphins
communicate via ultrasonic sound, and rats are known to communicate and even play using it.
Sound waves below 20 Hz are infrasonic; rhinos, hippos, elephants, whales, octopuses
communicate via infrasonic sound.
20 kHz से अधिक आवृत्ति की ध्वनि तरंगें पराश्रव्य कहलाती हैं; चमगादड़, प्रेइंग मैंटिस,
डॉल्फिन इसके माध्यम से संवाद करते हैं, और चूहे इसी का उपयोग संवाद व खेलने में करते हैं।
20 Hz से कम आवृत्ति की तरंगें अवश्रव्य कहलाती हैं; गैंडा, दरियाई घोड़ा, हाथी, व्हेल, ऑक्टोपस
इसके माध्यम से संवाद करते हैं।
RRB Group D 24/09/2018 (Afternoon)
1097
At a given temperature, the speed of sound is maximum in _______.
किसी दिए गए तापमान पर, ध्वनि की चाल _______ में अधिकतम होती है।
✅ Correct Answer: (D)
Speed of sound is greatest in solids, decreasing from solids to liquids and liquids to
gases; a vacuum cannot conduct sound.
Among metals, speed is maximum in Aluminium (6420 m/s at 25°C), followed by Nickel (6040
m/s), Steel (5960 m/s), Iron (5950 m/s).
ध्वनि की चाल ठोस में सर्वाधिक होती है, ठोस से द्रव और द्रव से गैस में जाने पर घटती है;
निर्वात ध्वनि का संचालन नहीं कर सकता।
धातुओं में, चाल एल्युमिनियम (25°C पर 6420 मी/से) में अधिकतम है, इसके बाद निकल (6040 मी/से),
इस्पात (5960 मी/से), लोहा (5950 मी/से) है।
RRB Group D 26/09/2018 (Afternoon)
1098
If the temperature increases, the speed of sound:
यदि तापमान बढ़ता है, तो ध्वनि की चाल:
✅ Correct Answer: (C)
Sound is a form of energy produced by vibrating objects; it is a mechanical wave needing a
medium (air, water, steel etc.) and cannot travel through vacuum; it travels as longitudinal
waves.
Frequency is the number of compressions/rarefactions passing a point per second; time period
is the time for two consecutive compressions/rarefactions to cross a point; amplitude
determines loudness while frequency determines pitch.
Speed of sound increases with increase in temperature because V ∝ √T.
ध्वनि ऊर्जा का एक रूप है जो कंपायमान वस्तुओं से उत्पन्न होती है; यह एक यांत्रिक तरंग है जिसे
संचरण हेतु माध्यम (वायु, जल, इस्पात आदि) चाहिए और यह निर्वात में यात्रा नहीं कर सकती; यह
अनुदैर्ध्य तरंगों के रूप में चलती है।
आवृत्ति प्रति सेकंड किसी बिंदु से गुजरने वाले संपीडनों/विरलनों की संख्या है; आवर्तकाल दो
क्रमागत संपीडनों/विरलनों को किसी बिंदु से गुजरने में लगने वाला समय है; आयाम प्रबलता
निर्धारित करता है जबकि आवृत्ति तारत्व निर्धारित करती है।
तापमान बढ़ने के साथ ध्वनि की चाल बढ़ती है क्योंकि V ∝ √T।
RRB Group D 27/09/2018 (Evening)
1099
Compressions and rarefactions are due to variability of:
संपीडन और विरलन किसकी परिवर्तनशीलता के कारण होते हैं:
✅ Correct Answer: (C)
Compression is a region in a longitudinal wave where particles are closest together;
rarefaction is a region where particles are farthest apart.
High pressure brings medium particles closer forming compression, while low pressure forms
rarefaction. Transverse waves propagate as crests and troughs.
संपीडन अनुदैर्ध्य तरंग का वह क्षेत्र है जहाँ कण सबसे पास होते हैं; विरलन वह क्षेत्र है जहाँ
कण सबसे दूर होते हैं।
उच्च दाब माध्यम के कणों को पास लाकर संपीडन बनाता है, जबकि निम्न दाब विरलन बनाता है।
अनुप्रस्थ तरंगें शिखर व गर्त के रूप में संचरित होती हैं।
RRB Group D 28/09/2018 (Morning)
1100
Which of the following statements is correct about sound and light waves?
ध्वनि और प्रकाश तरंगों के बारे में निम्नलिखित में से कौन सा कथन सही है?
✅ Correct Answer: (D)
Sound waves travel through compressions and rarefactions in a medium, while light waves do
not require a medium to travel.
Sound waves are longitudinal (particles move parallel to wave direction); light waves are
transverse (particles move perpendicular to wave direction).
Both sound and light waves follow the law of reflection: angle of incidence equals angle of
reflection.
ध्वनि तरंगें माध्यम में संपीडन व विरलन के माध्यम से चलती हैं, जबकि प्रकाश तरंगों को यात्रा
हेतु माध्यम की आवश्यकता नहीं होती।
ध्वनि तरंगें अनुदैर्ध्य हैं (कण तरंग दिशा के समांतर गति करते हैं); प्रकाश तरंगें अनुप्रस्थ
हैं (कण तरंग दिशा के लंबवत गति करते हैं)।
ध्वनि और प्रकाश दोनों तरंगें परावर्तन के नियम का पालन करती हैं: आपतन कोण परावर्तन कोण के
बराबर होता है।
RRB Group D 01/10/2018 (Morning)
1101
The speed of sound changes in a medium at 25°C. Which of the following statements
is/are correct/false regarding this statement? A. The speed of sound in oxygen gas is 316
m/min. B. The speed of sound in distilled water is 1498 m/min.
25°C पर माध्यम में ध्वनि की चाल बदलती है। निम्नलिखित में से कौन सा/से कथन इस संबंध
में सही/गलत है/हैं? A. ऑक्सीजन गैस में ध्वनि की चाल 316 मी/मिनट है। B. आसुत जल में ध्वनि की चाल
1498 मी/मिनट है।
✅ Correct Answer: (C)
Speed of sound (m/s) at 25°C: Aluminium — 6420, Nickel — 6040, Steel — 5960, Sea water —
1531, Distilled water — 1498, Hydrogen — 1270, Air — 346, Oxygen — 316.
Statement A is wrong because the correct unit is m/s, not m/min. Statement B is wrong for
the same unit reason — both figures should be per second, not per minute.
25°C पर ध्वनि की चाल (मी/से): एल्युमिनियम — 6420, निकल — 6040, इस्पात — 5960, समुद्री जल —
1531, आसुत जल — 1498, हाइड्रोजन — 1270, वायु — 346, ऑक्सीजन — 316।
कथन A गलत है क्योंकि सही मात्रक मी/से है, न कि मी/मिनट। कथन B भी उसी मात्रक कारण से गलत है —
दोनों आँकड़े प्रति सेकंड होने चाहिए, प्रति मिनट नहीं।
RRB Group D 01/10/2018 (Afternoon)
1102
Which of the following statements is/are true/false about speed of sound in different
media at 25°C? A. In oxygen gas, speed of sound is 316 m/s. B. In water (distilled), the speed of
sound is 1498 m/s.
25°C पर विभिन्न माध्यमों में ध्वनि की चाल के बारे में निम्नलिखित में से कौन सा/से कथन
सही/गलत है/हैं? A. ऑक्सीजन गैस में ध्वनि की चाल 316 मी/से है। B. आसुत जल में ध्वनि की चाल 1498
मी/से है।
✅ Correct Answer: (C)
Speed of sound varies from substance to substance: slowest in gases, faster in liquids,
fastest in solids (molecules closer & more tightly bonded).
At 25°C (m/s): Aluminium — 6420, Hydrogen — 1284, Brass — 4700, Flint glass — 3980, Iron —
5950, Oxygen — 316, Distilled water — 1498. Both statements A and B match these values.
ध्वनि की चाल पदार्थ के अनुसार बदलती है: गैसों में सबसे धीमी, द्रवों में तेज़, ठोसों में सबसे
तेज़ (अणु पास व मज़बूती से जुड़े होते हैं)।
25°C पर (मी/से): एल्युमिनियम — 6420, हाइड्रोजन — 1284, पीतल — 4700, फ्लिंट ग्लास — 3980,
लोहा — 5950, ऑक्सीजन — 316, आसुत जल — 1498। कथन A व B दोनों इन मानों से मेल खाते हैं।
RRB Group D 01/10/2018 (Evening)
1103
Sound produced by a single frequency is called _____.
एकल आवृत्ति द्वारा उत्पन्न ध्वनि को _____ कहा जाता है।
✅ Correct Answer: (B)
Tone is a sound produced by a single frequency; wavelength is the distance between two
consecutive troughs/crests, and amplitude is the maximum displacement of a vibrating point.
Pitch is the perception of frequency, referring to how high or low a sound seems.
टोन एकल आवृत्ति द्वारा उत्पन्न ध्वनि है; तरंगदैर्घ्य दो क्रमागत गर्तों/शिखरों के बीच की दूरी
है, और आयाम किसी कंपन बिंदु का अधिकतम विस्थापन है।
तारत्व आवृत्ति की अनुभूति है, जो दर्शाता है कि ध्वनि कितनी ऊँची या नीची लगती है।
RRB Group D 04/10/2018 (Morning)
1104
A body travelling with a speed of more than the velocity of sound in air is said to
be ________.
वायु में ध्वनि के वेग से अधिक गति से चलने वाली वस्तु को ________ कहा जाता है।
✅ Correct Answer: (A)
Supersonic refers to a body travelling with a speed greater than the velocity of sound
(approx 343 m/s or Mach 1), such as bullets, jet planes.
Ultrasonic sound has frequency more than 20 kHz (dolphins, bats, porpoises); infrasonic
sound has frequency below 20 Hz.
पराध्वनिक (Supersonic) वह वस्तु है जो ध्वनि के वेग (लगभग 343 मी/से या मैक 1) से अधिक गति से
चलती है, जैसे गोली, जेट विमान।
पराश्रव्य ध्वनि की आवृत्ति 20 kHz से अधिक होती है (डॉल्फिन, चमगादड़, पोरपॉइज); अवश्रव्य
ध्वनि की आवृत्ति 20 Hz से कम होती है।
RRB Group D 04/10/2018 (Morning)
1105
The sound of human voice is produced from the vocal cord by _______.
मानव आवाज़ की ध्वनि स्वर रज्जु (vocal cord) से _______ के द्वारा उत्पन्न होती है।
✅ Correct Answer: (C)
The vocal cord, located in the larynx, is connected to the thyroid cartilage (the "Adam's
apple").
When air passes through during exhalation, the vocal cords come together and vibrate,
producing sound waves that form the voice.
स्वर रज्जु, जो कंठ (larynx) में स्थित होती है, थायरॉइड उपास्थि ("एडम्स एप्पल") से जुड़ी होती
है।
श्वास छोड़ते समय जब वायु गुजरती है, स्वर रज्जु आपस में मिलती व कंपन करती हैं, जिससे आवाज़
बनाने वाली ध्वनि तरंगें उत्पन्न होती हैं।
RRB Group D 05/10/2018 (Afternoon)
1106
Which of the following CANNOT travel in vacuum?
निम्नलिखित में से कौन निर्वात में यात्रा नहीं कर सकता?
✅ Correct Answer: (C)
Sound is a longitudinal mechanical wave requiring a medium (solid, liquid or gas); audible
range for humans is 20 Hz–20,000 Hz, and some animals like dogs can hear up to 25 kHz.
Infrasonic sound: below 20 Hz (earthquakes, volcanic eruptions, elephants, whales).
Ultrasonic: above 20,000 Hz (bats, dolphins). Speed of sound in air is 346 ms¹. UV
rays, heat and light can travel through vacuum.
ध्वनि एक अनुदैर्ध्य यांत्रिक तरंग है जिसे माध्यम (ठोस, द्रव या गैस) चाहिए; मानव के लिए
श्रव्य सीमा 20 Hz–20,000 Hz है, और कुत्ते जैसे कुछ जानवर 25 kHz तक सुन सकते हैं।
अवश्रव्य ध्वनि: 20 Hz से कम (भूकंप, ज्वालामुखी, हाथी, व्हेल)। पराश्रव्य: 20,000 Hz से अधिक
(चमगादड़, डॉल्फिन)। वायु में ध्वनि की चाल 346 मी/से है। पराबैंगनी किरणें, ऊष्मा व प्रकाश
निर्वात में यात्रा कर सकते हैं।
RRB Group D 09/10/2018 (Morning)
1107
Which of the following is NOT a characteristic of sound?
निम्नलिखित में से कौन सी ध्वनि की विशेषता नहीं है?
✅ Correct Answer: (B)
Vibration is not a characteristic of sound itself but the physical phenomenon that produces
it; sound is the audible mechanical wave that travels through a medium.
Actual characteristics of sound are pitch (frequency), quality/timbre, and
loudness/intensity.
कंपन स्वयं ध्वनि की विशेषता नहीं है, बल्कि वह भौतिक परिघटना है जो ध्वनि उत्पन्न करती है;
ध्वनि माध्यम से यात्रा करने वाली श्रव्य यांत्रिक तरंग है।
ध्वनि की वास्तविक विशेषताएँ हैं — तारत्व (आवृत्ति), गुणता (टिम्बर), और प्रबलता/तीव्रता।
RRB Group D 09/10/2018 (Evening)
1108
Sound can propagate through ______.
ध्वनि ______ के माध्यम से संचरित हो सकती है।
✅ Correct Answer: (A)
Sound can propagate through all three states of matter — solids, liquids and gases — but
cannot travel through vacuum.
Speed of sound depends on the medium's properties and temperature; order: Solids >
Liquids > Gases.
ध्वनि पदार्थ की तीनों अवस्थाओं — ठोस, द्रव व गैस — में संचरित हो सकती है, परंतु निर्वात में
नहीं।
ध्वनि की चाल माध्यम के गुणों व तापमान पर निर्भर करती है; क्रम: ठोस > द्रव > गैस।
RRB Group D 12/10/2018 (Morning)
1109
Which of the following statements is/are true of sound in different media at
25°C? A. In Aluminium, the speed of sound is 6420 m/s. B. In Nickel, the speed of sound is 6240
m/s.
25°C पर विभिन्न माध्यमों में ध्वनि के बारे में निम्नलिखित में से कौन सा/से कथन सही
है/हैं? A. एल्युमिनियम में, ध्वनि की चाल 6420 मी/से है। B. निकल में, ध्वनि की चाल 6240 मी/से है।
✅ Correct Answer: (A)
Speed of sound at 25°C (m/s): Aluminium — 6420 (CORRECT), Nickel — 6040 (NOT 6240), Steel —
5960, Sea water — 1531, Distilled water — 1498, Hydrogen — 1284, Air — 346, Oxygen — 316.
Statement A matches the correct value; statement B does not, so only A is true.
25°C पर ध्वनि की चाल (मी/से): एल्युमिनियम — 6420 (सही), निकल — 6040 (6240 नहीं), इस्पात —
5960, समुद्री जल — 1531, आसुत जल — 1498, हाइड्रोजन — 1284, वायु — 346, ऑक्सीजन — 316।
कथन A सही मान से मेल खाता है; कथन B नहीं, इसलिए केवल A सही है।
RRB Group D 12/10/2018 (Evening)
1110
Which of the following statements is/are true regarding the speed of sound at 25°C in
different media? A. The speed of sound in aluminum is 6220 m/s. B. The speed of sound in nickel is
6240 m/s.
25°C पर विभिन्न माध्यमों में ध्वनि की चाल के संबंध में निम्नलिखित में से कौन सा/से
कथन सही है/हैं? A. एल्युमिनियम में ध्वनि की चाल 6220 मी/से है। B. निकल में ध्वनि की चाल 6240 मी/से
है।
✅ Correct Answer: (C)
Speed of sound in solids at 25°C (m/s): Aluminium — 6420, Nickel — 6040, Steel — 5960, Iron
— 5950, Brass — 4700, Flint glass — 3980.
Statement A is wrong (Aluminium is 6420 m/s, not 6220). Statement B is wrong (Nickel is 6040
m/s, not 6240).
25°C पर ठोसों में ध्वनि की चाल (मी/से): एल्युमिनियम — 6420, निकल — 6040, इस्पात — 5960, लोहा
— 5950, पीतल — 4700, फ्लिंट ग्लास — 3980।
कथन A गलत है (एल्युमिनियम 6420 मी/से है, 6220 नहीं)। कथन B गलत है (निकल 6040 मी/से है, 6240
नहीं)।
RRB Group D 15/10/2018 (Morning)
1111
Which of the following statements is/are true of speed of sound in different media at
25°C? A. In Aluminium, speed of sound is 6220 m/s. B. In Nickel speed of sound 6040 m/s.
25°C पर विभिन्न माध्यमों में ध्वनि की चाल के बारे में निम्नलिखित में से कौन सा/से कथन
सही है/हैं? A. एल्युमिनियम में ध्वनि की चाल 6220 मी/से है। B. निकल में ध्वनि की चाल 6040 मी/से है।
✅ Correct Answer: (A)
Speed of sound in Aluminium at 25°C is around 6420 m/s, not 6220 m/s — so statement A is
false. Speed in Nickel is 6040 m/s — statement B is true.
Sound is a longitudinal mechanical wave that travels slowest through gases and fastest
through solids; speed in air is 343 m/s at 20°C.
25°C पर एल्युमिनियम में ध्वनि की चाल लगभग 6420 मी/से है, 6220 मी/से नहीं — इसलिए कथन A गलत
है। निकल में चाल 6040 मी/से है — कथन B सही है।
ध्वनि एक अनुदैर्ध्य यांत्रिक तरंग है जो गैसों में सबसे धीमी और ठोसों में सबसे तेज़ चलती है;
20°C पर वायु में चाल 343 मी/से है।
RRB Group D 15/10/2018 (Afternoon)
1112
Which of the following statements is/are true regarding the speed of sound at 25°C in
different media? A. In steel, the speed of sound is 5869 m/s. B. In nickel, the speed of sound is
6240 m/s.
25°C पर विभिन्न माध्यमों में ध्वनि की चाल के संबंध में निम्नलिखित में से कौन सा/से
कथन सही है/हैं? A. इस्पात में ध्वनि की चाल 5869 मी/से है। B. निकल में ध्वनि की चाल 6240 मी/से है।
✅ Correct Answer: (B)
Speed of sound at 25°C (m/s): Nickel — 6040, Steel — 5960 (NOT 5869), Aluminium — 6420, Sea
water — 1531, Distilled water — 1498, Hydrogen — 1284, Air — 346, Oxygen — 316.
Statement A is wrong (steel is 5960 m/s, not 5869). Statement B is wrong (nickel is 6040
m/s, not 6240).
25°C पर ध्वनि की चाल (मी/से): निकल — 6040, इस्पात — 5960 (5869 नहीं), एल्युमिनियम — 6420,
समुद्री जल — 1531, आसुत जल — 1498, हाइड्रोजन — 1284, वायु — 346, ऑक्सीजन — 316।
कथन A गलत है (इस्पात 5960 मी/से है, 5869 नहीं)। कथन B गलत है (निकल 6040 मी/से है, 6240
नहीं)।
RRB Group D 15/10/2018 (Evening)
1113
Which of the following statement(s) is/are true with respect to the speed of sound at
25°C in different mediums? A. In steel, the speed of sound is 5960 m/s. B. In nickel, the speed of
sound is 6040 m/s.
25°C पर विभिन्न माध्यमों में ध्वनि की चाल के संबंध में निम्नलिखित में से कौन सा/से
कथन सही है/हैं? A. इस्पात में ध्वनि की चाल 5960 मी/से है। B. निकल में ध्वनि की चाल 6040 मी/से है।
✅ Correct Answer: (A)
Speed of sound at 25°C (m/s): Aluminium — 6420, Nickel — 6040, Steel — 5960, Iron — 5950,
Brass — 4700, Sea water — 1531, Distilled water — 1498, Hydrogen — 1284, Air — 346, Oxygen —
316.
Statement A (steel = 5960 m/s) and statement B (nickel = 6040 m/s) both match the correct
values, so both are true.
25°C पर ध्वनि की चाल (मी/से): एल्युमिनियम — 6420, निकल — 6040, इस्पात — 5960, लोहा — 5950,
पीतल — 4700, समुद्री जल — 1531, आसुत जल — 1498, हाइड्रोजन — 1284, वायु — 346, ऑक्सीजन — 316।
कथन A (इस्पात = 5960 मी/से) और कथन B (निकल = 6040 मी/से) दोनों सही मानों से मेल खाते हैं,
इसलिए दोनों सही हैं।
RRB Group D 16/10/2018 (Morning)
1114
Sound travels through air and reaches our ears and provides us the ________.
ध्वनि वायु के माध्यम से यात्रा कर हमारे कानों तक पहुँचती है और हमें ________ प्रदान
करती है।
✅ Correct Answer: (C)
Loudness is how loud or soft a sound seems, determined by intensity and measured in
decibels; frequency (Hz) is the pitch of sound, with a human audible range of 20 Hz–20 kHz.
When sound reaches our ears and is interpreted by the brain, it gives us the sensation of
sound.
प्रबलता यह दर्शाती है कि ध्वनि कितनी तेज़ या मृदु लगती है, जो तीव्रता से निर्धारित होती है व
डेसिबल में मापी जाती है; आवृत्ति (Hz) ध्वनि का तारत्व है, जिसकी मानव श्रव्य सीमा 20 Hz–20
kHz है।
जब ध्वनि हमारे कानों तक पहुँचती है और मस्तिष्क द्वारा व्याख्या की जाती है, तो यह हमें ध्वनि
की अनुभूति प्रदान करती है।
RRB Group D 16/10/2018 (Afternoon)
1115
Sound is produced by ______.
ध्वनि ______ द्वारा उत्पन्न होती है।
✅ Correct Answer: (D)
When an object vibrates, it sets surrounding air molecules in motion, creating
pressure-variation waves that travel outward.
When these waves reach our ears, they are interpreted as sound.
जब कोई वस्तु कंपन करती है, तो यह आसपास के वायु अणुओं को गति में लाती है, जिससे दाब-परिवर्तन
तरंगें बाहर की ओर यात्रा करती हैं।
जब ये तरंगें हमारे कानों तक पहुँचती हैं, तो इन्हें ध्वनि के रूप में समझा जाता है।
RRB Group D 16/10/2018 (Evening)
1116
Which of the following statements is/are true about the speed of sound in different
media at 25°C? A. In steel, the speed of sound is 5960 cm/s. B. In nickel, the speed of sound is
6240 m/s.
25°C पर विभिन्न माध्यमों में ध्वनि की चाल के बारे में निम्नलिखित में से कौन सा/से कथन
सही है/हैं? A. इस्पात में ध्वनि की चाल 5960 सेमी/से है। B. निकल में ध्वनि की चाल 6240 मी/से है।
✅ Correct Answer: (D)
Speed of sound at 25°C (m/s) — Solids: Aluminium 6420, Nickel 6040, Steel 5960, Iron 5950,
Brass 4700, Glass 3980; Liquids: Sea water 1531, Distilled water 1498, Ethanol 1207,
Methanol 1103; Gases: Hydrogen 1284, Helium 965, Air 346, Oxygen 316, Sulfur dioxide 213.
Statement A is wrong — correct unit is m/s, not cm/s. Statement B is wrong — nickel is 6040
m/s, not 6240 m/s.
25°C पर ध्वनि की चाल (मी/से) — ठोस: एल्युमिनियम 6420, निकल 6040, इस्पात 5960, लोहा 5950,
पीतल 4700, कांच 3980; द्रव: समुद्री जल 1531, आसुत जल 1498, एथेनॉल 1207, मेथेनॉल 1103; गैस:
हाइड्रोजन 1284, हीलियम 965, वायु 346, ऑक्सीजन 316, सल्फर डाईऑक्साइड 213।
कथन A गलत है — सही मात्रक मी/से है, सेमी/से नहीं। कथन B गलत है — निकल 6040 मी/से है, 6240
नहीं।
RRB Group D 22/10/2018 (Morning)
1117
Which of the following statements is correct about the speed of sound in different
mediums at 25°C? A. The speed of sound in helium gas is 965 m/s. B. The speed of sound in hydrogen
gas is 1284 m/s.
25°C पर विभिन्न माध्यमों में ध्वनि की चाल के बारे में निम्नलिखित में से कौन सा कथन
सही है? A. हीलियम गैस में ध्वनि की चाल 965 मी/से है। B. हाइड्रोजन गैस में ध्वनि की चाल 1284 मी/से
है।
✅ Correct Answer: (D)
Speed of sound at 25°C (m/s) — Solids: Aluminium 6420, Nickel 6040, Brass 4700; Liquids: Sea
water 1531, Methanol 1103; Gases: Helium 965, Hydrogen 1284, Air 346, Oxygen 316, Sulphur
dioxide 213.
Both statement A (helium = 965 m/s) and statement B (hydrogen = 1284 m/s) match these
correct values.
25°C पर ध्वनि की चाल (मी/से) — ठोस: एल्युमिनियम 6420, निकल 6040, पीतल 4700; द्रव: समुद्री जल
1531, मेथेनॉल 1103; गैस: हीलियम 965, हाइड्रोजन 1284, वायु 346, ऑक्सीजन 316, सल्फर डाईऑक्साइड
213।
कथन A (हीलियम = 965 मी/से) और कथन B (हाइड्रोजन = 1284 मी/से) दोनों इन सही मानों से मेल खाते
हैं।
RRB Group D 24/10/2018 (Afternoon)
1118
What are stadium roofs and walls attached to to reduce resonance?
अनुनाद (resonance) को कम करने के लिए स्टेडियम की छतों और दीवारों में क्या लगाया जाता
है?
✅ Correct Answer: (B)
Fiberboard is a porous material commonly used in auditoriums as it effectively absorbs sound
waves, reducing resonance and improving sound clarity.
Other sound-absorbing materials include fabric panels, acoustic tiles, and carpeting.
फाइबरबोर्ड एक छिद्रयुक्त सामग्री है जो सभागारों में आमतौर पर उपयोग होती है क्योंकि यह ध्वनि
तरंगों को प्रभावी ढंग से अवशोषित कर अनुनाद कम करती है व ध्वनि स्पष्टता बढ़ाती है।
अन्य ध्वनि-अवशोषक सामग्रियों में फैब्रिक पैनल, ध्वनिक टाइल्स व कारपेटिंग शामिल हैं।
RRB Group D 30/10/2018 (Evening)
1119
In which of the following is the velocity of sound is maximum at 25°C?
निम्नलिखित में से किसमें 25°C पर ध्वनि का वेग अधिकतम है?
✅ Correct Answer: (B)
Sound is a mechanical wave needing a material medium and cannot travel through vacuum.
Speed of sound at 25°C (m/s) — Aluminium 6420, Nickel 6040, Steel 5960, Iron 5950, Brass
4700 (solids); Sea water 1531, Distilled water 1498, Ethanol 1207, Methanol 1103 (liquids);
Hydrogen 1284, Helium 965, Sulphur dioxide 213 (gases). Aluminium has maximum speed among
the given options.
ध्वनि एक यांत्रिक तरंग है जिसे भौतिक माध्यम आवश्यक है और यह निर्वात में यात्रा नहीं कर सकती।
25°C पर ध्वनि की चाल (मी/से) — एल्युमिनियम 6420, निकल 6040, इस्पात 5960, लोहा 5950, पीतल
4700 (ठोस); समुद्री जल 1531, आसुत जल 1498, एथेनॉल 1207, मेथेनॉल 1103 (द्रव); हाइड्रोजन 1284,
हीलियम 965, सल्फर डाईऑक्साइड 213 (गैस)। दिए गए विकल्पों में एल्युमिनियम की चाल अधिकतम है।
RRB Group D 31/10/2018 (Afternoon)
1120
When a sound is reflected from a distance of at least 17 m (approximately) it is
______.
जब कोई ध्वनि कम से कम लगभग 17 मी की दूरी से परावर्तित होती है, तो उसे ______ कहते
हैं।
✅ Correct Answer: (C)
Echo is the perception of a sound wave reflecting off a surface and returning to the
listener after a certain delay; minimum distance for a distinct echo is approximately 17.2
m, so the time gap is at least 0.1 s.
Resonance occurs when the frequency of a sound wave matches an object's natural frequency,
causing it to vibrate.
प्रतिध्वनि किसी सतह से परावर्तित होकर एक निश्चित विलंब के बाद श्रोता तक वापस पहुँचने वाली
ध्वनि तरंग की अनुभूति है; स्पष्ट प्रतिध्वनि के लिए न्यूनतम दूरी लगभग 17.2 मी है, जिससे समय
अंतराल कम से कम 0.1 सेकंड होता है।
अनुनाद तब होता है जब ध्वनि तरंग की आवृत्ति किसी वस्तु की प्राकृतिक आवृत्ति से मेल खाती है,
जिससे वह कंपन करने लगती है।
RRB Group D 31/10/2018 (Evening)
1121
Which of the following statements are true/false about the speed of sound in
different mediums at 25°C? A. In water (sea), the speed of sound is 1531 m/s. B. In ethanol, the
speed of sound is 1200 m/s.
25°C पर विभिन्न माध्यमों में ध्वनि की चाल के बारे में निम्नलिखित में से कौन सा/से कथन
सही/गलत है/हैं? A. समुद्री जल में, ध्वनि की चाल 1531 मी/से है। B. एथेनॉल में, ध्वनि की चाल 1200
मी/से है।
✅ Correct Answer: (A)
Speed of sound at 25°C (m/s): Aluminium — 6420, Nickel — 6040, Steel — 5960, Iron — 5950,
Distilled water — 1498, Ethanol — 1207, Methanol — 1103, Hydrogen — 1284, Helium — 965, Air
— 346.
Statement A (sea water = 1531 m/s) is correct. Statement B is wrong — ethanol is 1207 m/s,
not 1200 m/s.
25°C पर ध्वनि की चाल (मी/से): एल्युमिनियम — 6420, निकल — 6040, इस्पात — 5960, लोहा — 5950,
आसुत जल — 1498, एथेनॉल — 1207, मेथेनॉल — 1103, हाइड्रोजन — 1284, हीलियम — 965, वायु — 346।
कथन A (समुद्री जल = 1531 मी/से) सही है। कथन B गलत है — एथेनॉल 1207 मी/से है, 1200 मी/से
नहीं।
RRB Group D 5/11/2018 (Afternoon)
1122
What is echolocation used to measure in ships?
जहाज़ों में इकोलोकेशन का उपयोग किसे मापने के लिए किया जाता है?
✅ Correct Answer: (C)
Echolocation (also called sonar) uses sound waves to determine the distance to an object,
sending a sound pulse and measuring the time taken for the echo to return.
Ships use echolocation (SONAR) to measure the depth of water below them.
इकोलोकेशन (सोनार) किसी वस्तु की दूरी निर्धारित करने के लिए ध्वनि तरंगों का उपयोग करता है, यह
एक ध्वनि स्पंद भेजकर उसकी प्रतिध्वनि वापस आने में लगे समय को मापता है।
जहाज़ इकोलोकेशन (सोनार) का उपयोग अपने नीचे पानी की गहराई मापने के लिए करते हैं।
RRB Group D 12/11/2018 (Morning)
1123
Which of the following substances will have the minimum speed of sound?
निम्नलिखित में से किस पदार्थ में ध्वनि की चाल न्यूनतम होगी?
✅ Correct Answer: (D)
Speed of sound is primarily determined by the elasticity and density of the medium; sound
travels fastest in steel, followed by water and then air.
Air is a gas and sound travels slowest in gases among solid, liquid and gas states; the
denser and more elastic the medium, the faster sound travels.
ध्वनि की चाल मुख्यतः माध्यम की प्रत्यास्थता व घनत्व से निर्धारित होती है; ध्वनि इस्पात में
सबसे तेज़, उसके बाद जल में और फिर वायु में चलती है।
वायु एक गैस है और ठोस, द्रव व गैस अवस्थाओं में गैसों में ध्वनि सबसे धीमी चलती है; माध्यम
जितना सघन व प्रत्यास्थ होगा, ध्वनि उतनी ही तेज़ चलेगी।
RRB Group D 16/11/2018 (Evening)
1124
When sound passes through air, the air particles ________.
जब ध्वनि वायु से गुजरती है, तो वायु के कण ________।
✅ Correct Answer: (A)
Since sound waves are longitudinal waves, air particles vibrate to and fro in the direction
of propagation of sound.
A longitudinal wave is one where all particles of the medium vibrate in the same direction
as the wave (parallel to the direction of wave travel).
चूँकि ध्वनि तरंगें अनुदैर्ध्य तरंगें हैं, वायु के कण ध्वनि संचरण की दिशा में आगे-पीछे कंपन
करते हैं।
अनुदैर्ध्य तरंग वह है जिसमें माध्यम के सभी कण तरंग की दिशा में (तरंग गति की दिशा के समांतर)
कंपन करते हैं।
RRB Group D 07/12/2018 (Evening)
1125
Sound travels at a speed of 333 ms¹ in the air, thus, in 1s, a distance of 333 m
is travelled by:
वायु में ध्वनि 333 मी/से की चाल से यात्रा करती है, अतः 1 सेकंड में 333 मी की दूरी
किसके द्वारा तय की जाती है:
✅ Correct Answer: (D)
Sound travels as a disturbance in air in the form of compression and rarefaction — it is the
disturbance (wave), not the particles themselves, that travels 333 m.
A receiver accepts and converts signals like radio waves into useful form; a source
transmits message data; a particle is a small portion of matter.
ध्वनि वायु में संपीडन व विरलन के रूप में विक्षोभ के रूप में यात्रा करती है — 333 मी की दूरी
कण नहीं, बल्कि विक्षोभ (तरंग) तय करती है।
रिसीवर रेडियो तरंगों जैसे संकेतों को स्वीकार कर उपयोगी रूप में बदलता है; स्रोत संदेश डेटा को
कूटबद्ध कर प्रसारित करता है; कण पदार्थ का एक छोटा भाग है।
RRB ALP Tier-I (10/08/2018) Morning
1126
Fill in the blank with the most appropriate option. The pitch of a sound depends on
its _______.
सबसे उपयुक्त विकल्प से रिक्त स्थान भरें। ध्वनि का तारत्व उसकी _______ पर निर्भर करता
है।
✅ Correct Answer: (D)
Pitch of sound is directly proportional to frequency — the characteristic of sound that
differentiates whether a sound is shrill or flat.
Loudness of sound depends on amplitude: the higher the amplitude, the higher the loudness.
Wavelengths of audible sound frequencies range from 20 Hz to 20 kHz.
ध्वनि का तारत्व आवृत्ति के समानुपाती होता है — यह वह विशेषता है जो बताती है कि ध्वनि तीक्ष्ण
है या मंद।
ध्वनि की प्रबलता आयाम पर निर्भर करती है: आयाम जितना अधिक होगा, प्रबलता उतनी ही अधिक होगी।
श्रव्य ध्वनि आवृत्तियों का तरंगदैर्घ्य 20 Hz से 20 kHz तक होता है।
RRB ALP Tier-I (10/08/2018) Afternoon
1127
Sound CANNOT travel through:
ध्वनि किसके माध्यम से यात्रा नहीं कर सकती:
✅ Correct Answer: (C)
Sound is a form of energy produced by vibrations of objects; it is longitudinal and
mechanical, requiring a medium (solid, liquid or gas). In humans, it is created by the voice
box (larynx).
Human audible range is 20–20,000 Hz; some animals like dogs can hear higher frequencies.
Sound intensity is measured in decibels (dB); it cannot travel through vacuum since there
are no particles to vibrate.
ध्वनि वस्तुओं के कंपन से उत्पन्न ऊर्जा का एक रूप है; यह अनुदैर्ध्य व यांत्रिक है और इसे
माध्यम (ठोस, द्रव या गैस) चाहिए। मनुष्यों में यह स्वर यंत्र (कंठ) द्वारा उत्पन्न होती है।
मानव श्रव्य सीमा 20–20,000 Hz है; कुत्ते जैसे कुछ जानवर उच्च आवृत्तियाँ सुन सकते हैं। ध्वनि
तीव्रता डेसिबल (dB) में मापी जाती है; निर्वात में कोई कण न होने के कारण यह यात्रा नहीं कर
सकती।
RRB ALP Tier-I (13/08/2018) Evening
1128
The speed of sound in air at 0°C is:
0°C पर वायु में ध्वनि की चाल है:
✅ Correct Answer: (A)
Sound is a vibration that propagates as an acoustic wave through a gas, liquid or solid; it
is longitudinal and cannot travel through vacuum, always needing a medium.
Sound travels slowest through gases, faster through liquids, fastest through solids. Speed
of sound in air at 0°C is 331 ms¹ and at 20°C is approximately 343 ms¹.
ध्वनि एक कंपन है जो गैस, द्रव या ठोस माध्यम से ध्वनिक तरंग के रूप में संचरित होती है; यह
अनुदैर्ध्य है और निर्वात में यात्रा नहीं कर सकती, इसे हमेशा माध्यम चाहिए।
ध्वनि गैसों में सबसे धीमी, द्रवों में तेज़, ठोसों में सबसे तेज़ चलती है। 0°C पर वायु में
ध्वनि की चाल 331 मी/से तथा 20°C पर लगभग 343 मी/से है।
RRB ALP Tier-I (14/08/2018) Morning
1129
A sound of single frequency is called a:
एकल आवृत्ति की ध्वनि को कहते हैं:
✅ Correct Answer: (D)
A sound of single frequency is called a tone; loudness of sound depends on the amplitude of
the sound wave — larger amplitude means louder sound. Sounds above 80 dB become noise to
human ears.
Hertz (Hz) is the basic measure of frequency; humans can hear 20 Hz to 20 kHz. Pitch
differentiates shrill and flat sound; a note is produced when several frequencies mix.
एकल आवृत्ति की ध्वनि को टोन कहते हैं; ध्वनि की प्रबलता ध्वनि तरंग के आयाम पर निर्भर करती है
— बड़ा आयाम अर्थात् तेज़ ध्वनि। 80 dB से ऊपर की ध्वनियाँ मानव कान के लिए शोर बन जाती हैं।
हर्ट्ज़ (Hz) आवृत्ति का मूल मात्रक है; मनुष्य 20 Hz से 20 kHz तक सुन सकते हैं। तारत्व
तीक्ष्ण व मंद ध्वनि में अंतर करता है; कई आवृत्तियों के मिश्रण से नोट बनता है।
RRB ALP Tier-I (17/08/2018) Morning
1130
Sound is a:
ध्वनि है एक:
✅ Correct Answer: (C)
Sound is a vibration that propagates through a medium (solid, liquid or gas) as a mechanical
wave; it travels fastest in solids, slower in liquids, slowest in gases.
Sound waves are longitudinal; humans detect 20 Hz–20 kHz; loudness is in decibels (dB);
frequency's SI unit is hertz (Hz); an audiometer measures hearing capacity.
ध्वनि एक कंपन है जो माध्यम (ठोस, द्रव या गैस) से यांत्रिक तरंग के रूप में संचरित होती है; यह
ठोस में सबसे तेज़, द्रव में धीमी और गैस में सबसे धीमी चलती है।
ध्वनि तरंगें अनुदैर्ध्य हैं; मनुष्य 20 Hz–20 kHz सुन सकते हैं; प्रबलता डेसिबल (dB) में है;
आवृत्ति का SI मात्रक हर्ट्ज़ (Hz) है; ऑडियोमीटर श्रवण क्षमता मापने का उपकरण है।
RRB ALP Tier-I (17/08/2018) Evening
1131
Which of the following statements is true? The velocity of sound is:
निम्नलिखित में से कौन सा कथन सही है? ध्वनि का वेग:
✅ Correct Answer: (C)
Speed of sound is proportional to temperature — if temperature increases, speed of sound
also increases; summers are warmer than winters, so sound travels faster in summer.
Velocity of sound in air at 20°C is 343.2 m/s, which translates to 1,236 km/h.
ध्वनि की चाल तापमान के समानुपाती होती है — तापमान बढ़ने पर ध्वनि की चाल भी बढ़ती है;
सर्दियों की तुलना में गर्मियों में तापमान अधिक होता है, इसलिए गर्मी में ध्वनि तेज़ चलती है।
20°C पर वायु में ध्वनि का वेग 343.2 मी/से है, जो 1,236 किमी/घंटा के बराबर है।
RRB ALP Tier-I (20/08/2018) Evening
1132
The sensation of sound persists in the human brain for about:
ध्वनि की अनुभूति मानव मस्तिष्क में लगभग कितनी देर तक बनी रहती है:
✅ Correct Answer: (B)
Persistence of hearing means how long the sensation of a sound stays in our brain —
approximately 0.1 second. Echo is a repetition or partial repetition of sound due to
reflection, heard in enclosed spaces like wells, caves, or large auditoriums.
Speed of sound in air is 331 ms¹ at 0°C and 344 ms¹ at 22°C. Minimum distance for
echo = (speed of sound × minimum time)/2 = (344 × 0.1)/2 = 17.2 m.
श्रवण की निरंतरता का अर्थ है कि हमारे मस्तिष्क में किसी ध्वनि की अनुभूति कितनी देर तक बनी
रहती है — लगभग 0.1 सेकंड। प्रतिध्वनि परावर्तन के कारण ध्वनि की पुनरावृत्ति या आंशिक
पुनरावृत्ति है, जो कुओं, गुफाओं या बड़े सभागारों जैसे संलग्न स्थानों में सुनाई देती है।
वायु में ध्वनि की चाल 0°C पर 331 मी/से तथा 22°C पर 344 मी/से है। प्रतिध्वनि के लिए न्यूनतम
दूरी = (ध्वनि की चाल × न्यूनतम समय)/2 = (344 × 0.1)/2 = 17.2 मी।
RRB ALP Tier-I (21/08/2018) Morning
1133
The pitch of a sound depends on its:
ध्वनि का तारत्व उसकी किस पर निर्भर करता है:
✅ Correct Answer: (B)
Pitch depends on frequency and is measured in hertz (Hz), one hertz being one cycle per
second.
Timbre is the characteristic waveform depending on the sound-producing material; amplitude
is the loudness/maximum displacement of vibrating particles; intensity is power carried per
unit area perpendicular to that area.
तारत्व आवृत्ति पर निर्भर करता है और हर्ट्ज़ (Hz) में मापा जाता है, जहाँ एक हर्ट्ज़ का अर्थ
प्रति सेकंड एक चक्र है।
टिम्बर ध्वनि उत्पन्न करने वाली सामग्री पर निर्भर विशिष्ट तरंग-रूप है; आयाम माध्यम के
कंपायमान कणों की माध्य स्थिति से अधिकतम विस्थापन/प्रबलता है; तीव्रता किसी क्षेत्र के लंबवत
दिशा में प्रति इकाई क्षेत्रफल प्रवाहित शक्ति है।
RRB ALP Tier-I (30/08/2018) Afternoon
1134
If the frequency of a sound wave of given velocity is increased, how will it affect
its wavelength?
यदि किसी दी गई चाल की ध्वनि तरंग की आवृत्ति बढ़ा दी जाए, तो इसका तरंगदैर्घ्य पर क्या
प्रभाव पड़ेगा?
✅ Correct Answer: (C)
Wavelength is inversely proportional to frequency; since v = fλ, for a given velocity
v, if frequency f increases, wavelength λ must decrease.
Wavelength decreases as frequency increases, giving higher tones; amplitude (loudness)
decreases faster at higher frequencies because they are attenuated more than lower ones.
तरंगदैर्घ्य आवृत्ति के व्युत्क्रमानुपाती होता है; चूँकि v = fλ, किसी दिए गए वेग v के
लिए, यदि आवृत्ति f बढ़ती है, तो तरंगदैर्घ्य λ घटना अवश्यंभावी है।
आवृत्ति बढ़ने पर तरंगदैर्घ्य घटता है, जिससे उच्च स्वर उत्पन्न होते हैं; आयाम (प्रबलता) उच्च
आवृत्तियों पर तेज़ी से घटता है क्योंकि वे निम्न आवृत्तियों की तुलना में अधिक क्षीण होती हैं।