The statement that the upward buoyant force that is exerted on a body immersed in a
fluid, whether fully or partially, is equal to the weight of the fluid that the body displaces is
related to:
यह कथन कि किसी तरल में पूर्णतः या आंशिक रूप से डूबे हुए पिंड पर लगने वाला ऊपर की ओर
उत्प्लावन बल, पिंड द्वारा हटाए गए तरल के भार के बराबर होता है, संबंधित है:
✅ Correct Answer: (C)
Archimedes' principle is a fundamental law of fluid mechanics.
Beer-Lambert law states that the concentration of a sample and path length are directly
proportional to the absorbance of light.
Pascal's law states that external static pressure applied on a confined liquid is
transmitted evenly throughout the liquid in all directions.
Bernoulli's Principle states that as the speed of a moving fluid increases, the pressure
within the fluid decreases.
आर्किमिडीज सिद्धांत तरल यांत्रिकी का एक मौलिक नियम है।
बीयर-लैंबर्ट नियम कहता है कि नमूने की सांद्रता और पथ की लंबाई प्रकाश के अवशोषण के सीधे
समानुपाती होती है।
पास्कल का नियम कहता है कि एक बंद तरल पर लगाया गया बाह्य दाब तरल के सभी दिशाओं में समान रूप
से प्रसारित होता है।
बर्नौली सिद्धांत कहता है कि जैसे-जैसे बहते हुए तरल की गति बढ़ती है, तरल के भीतर दाब घटता
जाता है।
RRB NTPC CBT-II (15/06/2022) Shift 1
837
According to which law, at constant temperature, the volume of a gas is inversely
proportional to pressure?
किस नियम के अनुसार, स्थिर तापमान पर, गैस का आयतन दाब के व्युत्क्रमानुपाती होता है?
✅ Correct Answer: (C)
Boyle's law states that at constant temperature, the volume of a gas is inversely
proportional to its pressure (PV = constant).
Graham's Gas Diffusion Law — the rate of diffusion of a gas at constant pressure is
inversely proportional to the square root of its molar mass.
Charles's law — the volume of an ideal gas is directly proportional to the absolute
temperature at constant pressure.
Gay-Lussac's law — the pressure of a given mass of gas varies directly with the absolute
temperature when volume is kept constant.
बॉयल का नियम कहता है कि स्थिर तापमान पर गैस का आयतन उसके दाब के व्युत्क्रमानुपाती होता है
(PV = स्थिरांक)।
ग्राहम का गैस विसरण नियम — स्थिर दाब पर गैस के विसरण की दर उसके मोलर द्रव्यमान के वर्गमूल के
व्युत्क्रमानुपाती होती है।
चार्ल्स का नियम — स्थिर दाब पर आदर्श गैस का आयतन उसके परम तापमान के सीधे समानुपाती होता है।
गे-लुसाक का नियम — स्थिर आयतन पर गैस के दाब में परिवर्तन उसके परम तापमान के सीधे समानुपाती
होता है।
RRB NTPC CBT-I (28/12/2020) Evening
838
What is the other name of Newton's first law of motion?
न्यूटन के गति के पहले नियम का दूसरा नाम क्या है?
✅ Correct Answer: (A)
According to this law, a body at rest remains at rest, and a body moving in a straight line
with uniform velocity remains in motion, unless an external force is applied.
इस नियम के अनुसार, विराम अवस्था में स्थित पिंड विराम में रहता है और सीधी रेखा में समान वेग
से गतिमान पिंड गतिमान रहता है, जब तक कि उस पर कोई बाह्य बल न लगाया जाए।
RRB NTPC CBT-I (04/01/2021) Evening
839
What is the equation for Newton's second law of motion?
न्यूटन के गति के दूसरे नियम का समीकरण क्या है?
✅ Correct Answer: (C)
Newton's Second Law of Motion — the rate of change of momentum of a body is directly
proportional to the applied force and takes place in the direction in which the force acts.
F = ma.
Newton's First Law — an object remains at rest, or moves at a constant speed in a straight
line, unless a force is applied to it.
Newton's Third Law — for every action, there is an equal and opposite reaction.
न्यूटन का दूसरा नियम — किसी पिंड के संवेग में परिवर्तन की दर लगाए गए बल के सीधे समानुपाती
होती है और उसी दिशा में होती है जिस दिशा में बल कार्य करता है। F = ma।
न्यूटन का पहला नियम — कोई वस्तु विराम अवस्था में रहती है या सीधी रेखा में स्थिर चाल से गति
करती रहती है, जब तक उस पर बल न लगाया जाए।
न्यूटन का तीसरा नियम — प्रत्येक क्रिया के बराबर और विपरीत प्रतिक्रिया होती है।
RRB NTPC CBT-I (12/02/2021) Morning
840
The rate of change of momentum of an object is proportional to the applied unbalanced
force in the direction of the force. This rule is known as:
किसी वस्तु के संवेग में परिवर्तन की दर, बल की दिशा में लगाए गए असंतुलित बल के
समानुपाती होती है। यह नियम कहलाता है:
✅ Correct Answer: (A)
Newton's Third Law of motion — for every action there is an equal and opposite reaction.
Newton's First Law of motion — every object remains at rest or in uniform motion in a
straight line unless an external or unbalanced force acts upon it.
Newton's Second Law of Motion states that the rate of change of momentum of a body is
directly proportional to the applied force and takes place in the direction in which the
force acts.
न्यूटन का तीसरा नियम — प्रत्येक क्रिया के बराबर और विपरीत प्रतिक्रिया होती है।
न्यूटन का पहला नियम — प्रत्येक वस्तु विराम अवस्था में या सीधी रेखा में एकसमान गति में रहती
है जब तक उस पर कोई बाह्य या असंतुलित बल न लगाया जाए।
न्यूटन का दूसरा नियम कहता है कि किसी पिंड के संवेग में परिवर्तन की दर लगाए गए बल के सीधे
समानुपाती होती है और उसी दिशा में होती है जिस दिशा में बल कार्य करता है।
RRB NTPC CBT-I (15/02/2021) Evening
841
A spring balance is a device commonly used for measuring the _____ acting on an
object.
स्प्रिंग तुला (spring balance) एक उपकरण है जिसका उपयोग आमतौर पर किसी वस्तु पर कार्य
करने वाले _____ को मापने के लिए किया जाता है।
✅ Correct Answer: (A)
Force (F) — SI unit Newton, F = m (mass) × a (acceleration), a vector quantity.
Spring balance works on Hooke's Law, which states that the force needed to extend a spring
is proportional to the distance the spring is extended from its rest position.
Momentum (p): SI unit kg⋅m/s, p = m × v, a vector quantity. Velocity: rate of change of
distance, SI unit m/s. Mass: SI unit kg, a scalar quantity.
बल (F) — SI मात्रक न्यूटन, F = m (द्रव्यमान) × a (त्वरण), एक सदिश राशि है।
स्प्रिंग तुला हुक के नियम पर कार्य करती है, जिसके अनुसार स्प्रिंग को खींचने के लिए आवश्यक
बल, विराम स्थिति से खिंचाव की दूरी के समानुपाती होता है।
संवेग (p): SI मात्रक kg⋅m/s, p = m × v, सदिश राशि। वेग: दूरी में परिवर्तन की दर, SI मात्रक
m/s। द्रव्यमान: SI मात्रक kg, अदिश राशि।
RRB NTPC CBT-I (05/03/2021) Evening
842
Which is the least frictional force of the following?
निम्नलिखित में से कौन सा घर्षण बल सबसे कम है?
✅ Correct Answer: (D)
Rolling friction is a type of kinetic friction; it comes into play when one body actually
rolls on the surface of another.
Order: Static > Sliding > Rolling. Static frictional force is the strongest among all.
Fluid friction is the friction acting on objects moving through a fluid. Friction is the
force that resists motion between two surfaces in contact.
लोटनिक घर्षण एक प्रकार का गतिज घर्षण है; यह तब कार्य करता है जब एक पिंड वास्तव में दूसरे
पिंड की सतह पर लुढ़कता है।
क्रम: स्थैतिक > सर्पी > लोटनिक। स्थैतिक घर्षण बल सबसे प्रबल होता है।
तरल घर्षण वह घर्षण है जो किसी तरल में गतिमान वस्तुओं पर कार्य करता है। घर्षण वह बल है जो
संपर्क में आने वाली दो सतहों के बीच गति का विरोध करता है।
RRB NTPC CBT-I (07/03/2021) Evening
843
Which one of the following is NOT a scalar quantity?
निम्नलिखित में से कौन सी अदिश (scalar) राशि नहीं है?
✅ Correct Answer: (C)
Scalar quantities are described only by magnitude. Examples — distance, speed, mass,
temperature, energy, work, volume, area.
Vector quantities have both magnitude and direction. Examples — torque, displacement,
velocity, force.
अदिश राशियाँ केवल परिमाण द्वारा वर्णित होती हैं। उदाहरण — दूरी, चाल, द्रव्यमान, तापमान,
ऊर्जा, कार्य, आयतन, क्षेत्रफल।
सदिश राशियों में परिमाण और दिशा दोनों होते हैं। उदाहरण — बलआघूर्ण, विस्थापन, वेग, बल।
RRB NTPC CBT-I (27/03/2021) Morning
844
Among the following, the weakest force is:
निम्नलिखित में सबसे कमजोर बल है:
✅ Correct Answer: (B)
Gravitational force is the force of attraction between all masses in the universe; it is the
weakest of the four fundamental forces.
Electric force is the interaction of either attractive or repulsive force between two
charged bodies.
Buoyant force acts on an object opposite to gravity, exerted by a fluid in which the object
is submerged partially or completely.
Nuclear force acts between two or more nucleons and is the strongest fundamental force.
गुरुत्वाकर्षण बल ब्रह्मांड के सभी द्रव्यमानों के बीच आकर्षण का बल है; यह चार मौलिक बलों में
सबसे कमजोर है।
विद्युत बल दो आवेशित पिंडों के बीच आकर्षक या प्रतिकर्षक अंतःक्रिया है।
उत्प्लावन बल गुरुत्व के विपरीत दिशा में कार्य करता है, जो किसी तरल द्वारा आंशिक या पूर्ण रूप
से डूबी वस्तु पर लगता है।
नाभिकीय बल दो या अधिक न्यूक्लियॉनों के बीच कार्य करता है और यह सबसे प्रबल मौलिक बल है।
RRB NTPC CBT-I (27/03/2021) Morning
845
The following statement applies to which law from the given options? 'The line that
joins any planet to the sun sweeps equal areas in equal intervals of time.'
निम्नलिखित कथन दिए गए विकल्पों में से किस नियम पर लागू होता है? 'किसी ग्रह को सूर्य
से जोड़ने वाली रेखा समान समय अंतराल में समान क्षेत्रफल तय करती है।'
✅ Correct Answer: (B)
Kepler's laws of planetary motion are three laws describing the motion of planets around the
Sun.
Law of Orbits — all planets move in elliptical orbits, with the Sun at one focus.
Law of Areas — a line segment joining a planet and the Sun sweeps out equal areas during
equal intervals of time (this is the given statement).
Law of Periods — the square of the period of any planet is proportional to the cube of the
semimajor axis of its orbit.
केप्लर के ग्रहीय गति के नियम तीन नियम हैं जो सूर्य के चारों ओर ग्रहों की गति का वर्णन करते
हैं।
कक्षा का नियम — सभी ग्रह दीर्घवृत्ताकार कक्षाओं में गति करते हैं, जिसमें सूर्य एक फोकस पर
स्थित होता है।
क्षेत्रफल का नियम — किसी ग्रह और सूर्य को जोड़ने वाला रेखाखंड समान समय अंतराल में समान
क्षेत्रफल तय करता है (यही दिया गया कथन है)।
आवर्तकाल का नियम — किसी ग्रह के आवर्तकाल का वर्ग उसकी कक्षा के अर्ध-दीर्घ अक्ष के घन के
समानुपाती होता है।
RRB NTPC CBT-I (24/07/2021) Morning
846
When brake is applied in a bicycle, the brake pad touches the wheel. Now what stops
the movement of the wheel?
जब साइकिल में ब्रेक लगाया जाता है, तो ब्रेक पैड पहिये को छूता है। अब पहिये की गति को
क्या रोकता है?
✅ Correct Answer: (C)
Friction is the opposing force that acts against the relative motion between two surfaces,
always in the direction opposite to the object's motion.
The amount of friction depends on the materials of the two surfaces — rougher surfaces
produce more friction.
When the brake pad touches the wheel, friction between the pad and the rim stops the wheel's
movement.
घर्षण वह विरोधी बल है जो दो सतहों के बीच सापेक्ष गति का विरोध करता है, यह हमेशा वस्तु की गति
के विपरीत दिशा में कार्य करता है।
घर्षण की मात्रा दोनों सतहों की सामग्री पर निर्भर करती है — जितनी खुरदरी सतह होगी, उतना अधिक
घर्षण उत्पन्न होगा।
जब ब्रेक पैड पहिये को छूता है, तो पैड और रिम के बीच घर्षण पहिये की गति को रोक देता है।
RRB JE 22/05/2019 (Afternoon)
847
What happens to the irregularities of the two surfaces which causes static friction?
दो सतहों की अनियमितताओं का क्या होता है जिससे स्थैतिक घर्षण उत्पन्न होता है?
✅ Correct Answer: (B)
Static friction acts on a body when there is no relative motion between the object and the
surface.
The irregularities of the two surfaces interlock with each other, causing static friction.
Sliding friction acts while surfaces are in sliding motion; rolling friction occurs when one
object rolls on another; fluid friction is exerted by a fluid on a moving object.
स्थैतिक घर्षण किसी पिंड पर तब कार्य करता है जब वस्तु और सतह के बीच कोई सापेक्ष गति न हो।
दोनों सतहों की अनियमितताएं आपस में परस्पर जुड़ जाती हैं, जिससे स्थैतिक घर्षण उत्पन्न होता
है।
सर्पी घर्षण सतहों के फिसलने के दौरान कार्य करता है; लोटनिक घर्षण तब उत्पन्न होता है जब एक
वस्तु दूसरी पर लुढ़कती है; तरल घर्षण किसी तरल द्वारा गतिमान वस्तु पर लगाया जाता है।
RRB JE 23/05/2019 (Morning)
848
Archimedes principle is used to design which of the following?
आर्किमिडीज सिद्धांत का उपयोग निम्नलिखित में से किसे डिजाइन करने में किया जाता है?
✅ Correct Answer: (A)
Archimedes' Principle — the upward buoyant force on a body immersed in a fluid (partially or
fully) is equal to the weight of the fluid displaced, acting at the centre of mass of the
displaced fluid.
Formula: Fb = ρ × g × V, where Fb = buoyant force, ρ = density of liquid, V = volume, g =
acceleration due to gravity.
Submarines use this principle to dive and surface.
आर्किमिडीज सिद्धांत — किसी तरल में आंशिक या पूर्ण रूप से डूबी वस्तु पर लगने वाला ऊपर की ओर
उत्प्लावन बल, हटाए गए तरल के भार के बराबर होता है और यह हटाए गए तरल के द्रव्यमान केंद्र पर
कार्य करता है।
सूत्र: Fb = ρ × g × V, जहाँ Fb = उत्प्लावन बल, ρ = तरल का घनत्व, V = आयतन, g = गुरुत्वीय
त्वरण।
पनडुब्बियां इस सिद्धांत का उपयोग डूबने और सतह पर आने के लिए करती हैं।
RRB JE 23/05/2019 (Afternoon)
849
Which of the following becomes difficult without a frictional force?
घर्षण बल के बिना निम्नलिखित में से कौन सा कार्य कठिन हो जाता है?
✅ Correct Answer: (B)
Frictional force is the force that resists motion when the surface of one object comes in
contact with the surface of another.
Example — walking on dry ground, lighting a matchstick. Friction is very low on smooth
surfaces like wet marble.
Types of frictional force — static, sliding, rolling, fluid. Without friction, walking on a
wet marble floor becomes very difficult due to minimal grip.
घर्षण बल वह बल है जो एक वस्तु की सतह दूसरी वस्तु की सतह के संपर्क में आने पर गति का विरोध
करता है।
उदाहरण — सूखी जमीन पर चलना, माचिस जलाना। गीले संगमरमर जैसी चिकनी सतहों पर घर्षण बहुत कम होता
है।
घर्षण बल के प्रकार — स्थैतिक, सर्पी, लोटनिक, तरल। घर्षण के बिना गीले संगमरमर के फर्श पर चलना
बहुत कठिन हो जाता है क्योंकि पकड़ न्यूनतम होती है।
RRB JE 23/05/2019 (Afternoon)
850
When we apply a muscular force with a hammer, which other force fixes the nail in the
wall?
जब हम हथौड़े से पेशीय बल लगाते हैं, तो कौन सा अन्य बल कील को दीवार में स्थिर करता है?
✅ Correct Answer: (C)
When an object slides or rolls over another, a force acts between the surfaces opposite to
the direction of motion.
When a nail is hammered into a wall, friction between the nail surface and the wall material
holds the nail in place.
Magnetic force arises between charged particles due to their motion; electrostatic force
acts between charged particles at rest; spring force is a restoring force acting opposite to
the applied displacement.
जब कोई वस्तु दूसरी वस्तु पर फिसलती या लुढ़कती है, तो सतहों के बीच गति की विपरीत दिशा में बल
कार्य करता है।
जब कील को दीवार में ठोका जाता है, तो कील की सतह और दीवार की सामग्री के बीच घर्षण कील को अपनी
जगह पर स्थिर रखता है।
चुंबकीय बल आवेशित कणों की गति के कारण उत्पन्न होता है; स्थैतिक विद्युत बल विराम स्थिति में
आवेशित कणों के बीच कार्य करता है; स्प्रिंग बल एक प्रत्यानयन बल है जो सदैव विपरीत दिशा में
कार्य करता है।
RRB JE 24/05/2019 (Morning)
851
What does friction cause to the screws, ball bearings and soles of the shoes?
घर्षण पेंच, बॉल बेयरिंग और जूतों के तलवों पर क्या प्रभाव डालता है?
✅ Correct Answer: (B)
Friction is the force that resists the sliding or rolling of one solid object over another.
Factors affecting friction — nature of the two surfaces in contact and the force acting on
them. Types — static, sliding, rolling, fluid. Formula: f = µN.
Continuous rubbing due to friction wears out materials like screws, ball bearings, and shoe
soles over time.
घर्षण वह बल है जो किसी ठोस वस्तु के दूसरी वस्तु पर फिसलने या लुढ़कने का विरोध करता है।
घर्षण को प्रभावित करने वाले कारक — संपर्क में आने वाली दोनों सतहों की प्रकृति और उन पर कार्य
करने वाला बल। प्रकार — स्थैतिक, सर्पी, लोटनिक, तरल। सूत्र: f = µN।
घर्षण के कारण निरंतर रगड़ से समय के साथ पेंच, बॉल बेयरिंग और जूतों के तलवे जैसी सामग्रियां
घिस जाती हैं।
RRB JE 24/05/2019 (Afternoon)
852
If an object starts moving and if there is no friction at all, what happens?
यदि कोई वस्तु गति करना शुरू कर दे और वहां बिल्कुल भी घर्षण न हो, तो क्या होगा?
✅ Correct Answer: (A)
Friction reduces relative motion between two bodies or surfaces in contact, always opposing
the direction of motion.
Order of frictional force: static > sliding (kinetic) > rolling. Drag is the frictional
force exerted by fluids.
Without friction, there is no opposing force, so by Newton's first law, the object continues
moving indefinitely.
घर्षण संपर्क में आने वाले दो पिंडों या सतहों के बीच सापेक्ष गति को कम करता है, हमेशा गति की
विपरीत दिशा में कार्य करते हुए।
घर्षण बल का क्रम: स्थैतिक > सर्पी (गतिज) > लोटनिक। ड्रैग तरल पदार्थों द्वारा लगाया गया घर्षण
बल है।
घर्षण के बिना कोई विरोधी बल नहीं होता, इसलिए न्यूटन के पहले नियम के अनुसार वस्तु अनिश्चित
काल तक गति करती रहेगी।
RRB JE 24/05/2019 (Evening)
853
What did Archimedes determine after discovering the Archimedes principle?
आर्किमिडीज सिद्धांत की खोज के बाद आर्किमिडीज ने क्या निर्धारित किया?
✅ Correct Answer: (A)
Archimedes' principle (the physical law of buoyancy) states that a body wholly or partially
immersed in a fluid experiences an upward thrust equal to the weight of the fluid displaced.
Archimedes used this principle to determine whether the king's crown was made of pure gold
by comparing its density with pure gold.
Hydrometers, ships, and submarines work on Archimedes' principle. A lactometer is used to
determine the purity of milk.
आर्किमिडीज सिद्धांत (उत्प्लावन का भौतिक नियम) कहता है कि किसी तरल में पूर्ण या आंशिक रूप से
डूबा पिंड, हटाए गए तरल के भार के बराबर ऊपर की ओर उत्प्लावन बल का अनुभव करता है।
आर्किमिडीज ने इस सिद्धांत का उपयोग यह निर्धारित करने के लिए किया कि राजा का मुकुट शुद्ध सोने
से बना है या नहीं, इसकी घनत्व की तुलना शुद्ध सोने से करके।
हाइड्रोमीटर, जहाज और पनडुब्बियां आर्किमिडीज सिद्धांत पर काम करती हैं। दूध की शुद्धता
निर्धारित करने के लिए लैक्टोमीटर का उपयोग किया जाता है।
RRB JE 24/05/2019 (Evening)
854
Why are the tyres of the cars, trucks and bulldozers treaded?
कारों, ट्रकों और बुलडोजरों के टायरों में ट्रेड (treads) क्यों बनाई जाती है?
✅ Correct Answer: (D)
Without treads, tires would be smooth and would not have enough traction on the road,
leading to skidding and accidents.
Friction is the resistance to motion of one object moving relative to another.
Types of friction — static (objects resting on a surface), sliding (objects sliding over a
surface), rolling (objects rolling over a surface), fluid (objects moving through a fluid).
ट्रेड के बिना, टायर चिकने होते और सड़क पर पर्याप्त कर्षण (traction) नहीं होता, जिससे फिसलन
और दुर्घटनाएं हो सकती हैं।
घर्षण एक वस्तु की दूसरी के सापेक्ष गति का प्रतिरोध है।
घर्षण के प्रकार — स्थैतिक (सतह पर टिकी वस्तुएं), सर्पी (सतह पर फिसलती वस्तुएं), लोटनिक (सतह
पर लुढ़कती वस्तुएं), तरल (तरल में गतिमान वस्तुएं)।
RRB JE 25/05/2019 (Morning)
855
Compare rolling friction and sliding friction.
लोटनिक घर्षण और सर्पी घर्षण की तुलना करें।
✅ Correct Answer: (C)
Rolling friction occurs when an object rolls on a surface, while sliding friction occurs
when an object slides or two surfaces are rubbed against each other.
In rolling, only a point on the surface stays in contact with the object; in sliding, a
finite area of the surface remains in contact.
Hence, friction is less in rolling than in sliding.
लोटनिक घर्षण तब होता है जब कोई वस्तु किसी सतह पर लुढ़कती है, जबकि सर्पी घर्षण तब होता है जब
कोई वस्तु फिसलती है या दो सतहें आपस में रगड़ी जाती हैं।
लुढ़कने में सतह का केवल एक बिंदु वस्तु के संपर्क में रहता है; फिसलने में सतह का एक निश्चित
क्षेत्र संपर्क में रहता है।
इसलिए, लुढ़कने में घर्षण फिसलने की तुलना में कम होता है।
RRB JE 25/05/2019 (Afternoon)
856
In some machines, why is using oil as a lubricant not advisable?
कुछ मशीनों में तेल को स्नेहक (lubricant) के रूप में उपयोग करना उचित क्यों नहीं है?
✅ Correct Answer: (A)
A machine mainly consists of static and rotating parts. Rotating parts heat up due to
friction, and if oil leaks during this time, it may catch fire.
Static parts in some machines consist of wires and switches; oil leakage into these could
cause a short circuit and possible fire.
Lubricants such as grease are used instead to reduce friction and smoothen surfaces in such
specific machines where oil poses a leakage risk.
मशीन में मुख्यतः स्थिर और घूर्णन करने वाले पुर्जे होते हैं। घूर्णन करने वाले पुर्जे घर्षण के
कारण गर्म हो जाते हैं, और यदि इस दौरान तेल रिसता है तो आग लग सकती है।
कुछ मशीनों में स्थिर पुर्जों में तार और स्विच होते हैं; इनमें तेल रिसाव से शॉर्ट सर्किट और
संभावित आग लग सकती है।
ऐसी विशेष मशीनों में जहां तेल रिसाव का खतरा होता है, घर्षण कम करने और सतहों को चिकना करने के
लिए ग्रीस जैसे स्नेहक का उपयोग किया जाता है।
RRB JE 25/05/2019 (Evening)
857
Why does a mechanic apply grease between the moving parts of a bicycle or a motor?
मैकेनिक साइकिल या मोटर के गतिशील पुर्जों के बीच ग्रीस क्यों लगाता है?
✅ Correct Answer: (D)
Friction is the force that opposes the motion of one solid object over another. Main types —
static, sliding, rolling, fluid (also called drag).
Lubricants prevent wear by reducing friction between two parts.
Grease forms a thin film between moving parts, preventing them from directly rubbing against
each other, thus reducing friction and wear.
घर्षण वह बल है जो किसी ठोस वस्तु के दूसरी वस्तु पर गति का विरोध करता है। मुख्य प्रकार —
स्थैतिक, सर्पी, लोटनिक, तरल (जिसे ड्रैग भी कहते हैं)।
स्नेहक दो पुर्जों के बीच घर्षण कम करके घिसाव को रोकते हैं।
ग्रीस गतिशील पुर्जों के बीच एक पतली परत बनाता है, जिससे वे सीधे एक-दूसरे से रगड़ नहीं खाते,
इस प्रकार घर्षण और घिसाव कम होता है।
RRB JE 26/05/2019 (Morning)
858
How does a lubricant reduce friction between moving parts of a machine?
स्नेहक मशीन के गतिशील पुर्जों के बीच घर्षण को कैसे कम करता है?
✅ Correct Answer: (C)
Lubricants are substances that reduce friction between surfaces in mutual contact, which
reduces the heat generated when surfaces move.
Main functions of a lubricant — preventing machine wear, corrosion protection, and cooling
by dissipating heat from surfaces.
The lubricant forms a thin film between surfaces so they do not directly rub against each
other.
स्नेहक ऐसे पदार्थ हैं जो परस्पर संपर्क में आने वाली सतहों के बीच घर्षण को कम करते हैं, जिससे
सतहों के गतिमान होने पर उत्पन्न ऊष्मा भी कम होती है।
स्नेहक के मुख्य कार्य — मशीन के घिसाव को रोकना, संक्षारण से सुरक्षा, और सतहों से ऊष्मा का
अपव्यय कर शीतलन।
स्नेहक सतहों के बीच एक पतली परत बनाता है ताकि वे सीधे एक-दूसरे से न रगड़ें।
RRB JE 27/05/2019 (Morning)
859
Due to which force does the moon move around the Earth in its near circular orbit?
किस बल के कारण चंद्रमा पृथ्वी के चारों ओर लगभग वृत्ताकार कक्षा में गति करता है?
✅ Correct Answer: (D)
Centripetal force is the force without which a body cannot move in a circular orbit; it
depends on mass, velocity, and radius of the circular path.
Example — gravitational force keeping a satellite in orbit.
Centrifugal force is the apparent outward force felt in a curved path; mechanical force
requires direct contact; frictional force is generated between two surfaces in contact.
अभिकेंद्री बल वह बल है जिसके बिना कोई पिंड वृत्ताकार कक्षा में गति नहीं कर सकता; यह
द्रव्यमान, वेग और वृत्ताकार पथ की त्रिज्या पर निर्भर करता है।
उदाहरण — गुरुत्वाकर्षण बल जो उपग्रह को कक्षा में बनाए रखता है।
अपकेंद्री बल घुमावदार पथ में महसूस होने वाला आभासी बाह्य बल है; यांत्रिक बल के लिए प्रत्यक्ष
संपर्क आवश्यक है; घर्षण बल संपर्क में आने वाली दो सतहों के बीच उत्पन्न होता है।
RRB JE 27/05/2019 (Morning)
860
Why do gymnasts apply some coarse substance on their hands?
जिमनास्ट अपने हाथों पर कोई खुरदरा पदार्थ क्यों लगाते हैं?
✅ Correct Answer: (C)
Examples of friction types — static (hitting a tennis ball), sliding (ice skating), rolling
(a soccer ball rolling), air friction (a skydiver falling), fluid friction (swimming).
Friction can be reduced by lubricants, polishing, streamlining, and ball bearings.
Gymnasts apply a coarse substance (like chalk/magnesium carbonate) on their hands to
increase friction and improve grip on bars and equipment.
घर्षण के प्रकारों के उदाहरण — स्थैतिक (टेनिस बॉल को मारना), सर्पी (आइस स्केटिंग), लोटनिक
(फुटबॉल का लुढ़कना), वायु घर्षण (स्काईडाइवर का गिरना), तरल घर्षण (तैराकी)।
घर्षण को स्नेहक, पॉलिशिंग, स्ट्रीमलाइनिंग और बॉल बेयरिंग द्वारा कम किया जा सकता है।
जिमनास्ट अपने हाथों पर खुरदरा पदार्थ (जैसे चॉक/मैग्नीशियम कार्बोनेट) लगाते हैं ताकि घर्षण
बढ़े और बार व उपकरणों पर पकड़ बेहतर हो सके।
RRB JE 27/05/2019 (Afternoon)
861
Can friction be eliminated entirely by polishing surfaces or by using lots of
lubricants?
क्या सतहों को पॉलिश करके या बहुत सारे स्नेहक का उपयोग करके घर्षण को पूरी तरह समाप्त
किया जा सकता है?
✅ Correct Answer: (C)
Friction is the force resisting the relative motion of solid surfaces, fluid layers, and
material elements sliding against each other.
Order: static friction > sliding friction > rolling friction.
Even after polishing or lubricating, some residual irregularities remain at the microscopic
level, so friction cannot be totally eliminated.
घर्षण वह बल है जो ठोस सतहों, तरल परतों और एक-दूसरे के विरुद्ध फिसलने वाले सामग्री तत्वों की
सापेक्ष गति का विरोध करता है।
क्रम: स्थैतिक घर्षण > सर्पी घर्षण > लोटनिक घर्षण।
पॉलिशिंग या स्नेहन के बाद भी सूक्ष्म स्तर पर कुछ अनियमितताएं शेष रहती हैं, इसलिए घर्षण को
पूरी तरह समाप्त नहीं किया जा सकता।
RRB JE 27/05/2019 (Evening)
862
On which of the following factors, does the frictional force on an object in a fluid
depend upon?
किसी तरल में किसी वस्तु पर लगने वाला घर्षण बल निम्नलिखित में से किन कारकों पर निर्भर
करता है?
✅ Correct Answer: (D)
Frictional force on an object moving through a fluid (called drag force) depends on all
three factors: speed with respect to the fluid — higher speed means greater drag.
Nature of the fluid — its viscosity affects drag.
Shape of the object — a streamlined shape reduces drag, a blunt shape increases it. Fluids
are substances that flow easily due to increased intermolecular spacing and lack of fixed
shape.
किसी तरल में गतिमान वस्तु पर लगने वाला घर्षण बल (जिसे ड्रैग बल कहते हैं) तीनों कारकों पर
निर्भर करता है: तरल के सापेक्ष गति — गति जितनी अधिक होगी, ड्रैग उतना ही अधिक होगा।
तरल की प्रकृति — इसकी श्यानता (viscosity) ड्रैग को प्रभावित करती है।
वस्तु का आकार — सुव्यवस्थित (streamlined) आकार ड्रैग को कम करता है, कुंद (blunt) आकार इसे
बढ़ाता है। तरल वे पदार्थ हैं जो बढ़े हुए अंतराआण्विक स्थान के कारण आसानी से बहते हैं और
जिनका कोई निश्चित आकार नहीं होता।
RRB JE 29/05/2019 (Morning)
863
Why are the soles of the shoes provided with grooves?
जूतों के तलवों में खांचे (grooves) क्यों बनाए जाते हैं?
✅ Correct Answer: (B)
Friction is the force that resists motion when the surface of one object comes in contact
with the surface of another.
Grooves on shoe soles increase contact area and create more irregularities between the shoe
and the ground, thereby increasing friction and providing better grip.
There are mainly four types of friction — static, sliding, rolling, and fluid friction.
घर्षण वह बल है जो एक वस्तु की सतह दूसरी वस्तु की सतह के संपर्क में आने पर गति का विरोध करता
है।
जूतों के तलवों पर खांचे संपर्क क्षेत्र बढ़ाते हैं और जूते तथा जमीन की सतह के बीच अधिक
अनियमितताएं उत्पन्न करते हैं, जिससे घर्षण बढ़ता है और बेहतर पकड़ मिलती है।
घर्षण मुख्यतः चार प्रकार का होता है — स्थैतिक, सर्पी, लोटनिक और तरल घर्षण।
RRB JE 29/05/2019 (Afternoon)
864
Why are luggages fitted with rollers?
सामान (luggage) में रोलर क्यों लगाए जाते हैं?
✅ Correct Answer: (B)
Rolling friction is the resistive force offered by a surface which opposes the rolling
motion of an object, slowing it down and eventually stopping it.
Rolling friction is generated when a round or spherical object rolls across a surface, and
it is less than sliding friction.
Since rolling friction is lower, rolling luggage requires less effort. Examples — vehicle
wheels, soccer balls, skateboard wheels.
लोटनिक घर्षण किसी सतह द्वारा प्रदान किया गया वह प्रतिरोधी बल है जो किसी वस्तु की लुढ़कने
वाली गति का विरोध करता है, जिससे वह धीमी होकर अंततः रुक जाती है।
लोटनिक घर्षण तब उत्पन्न होता है जब कोई गोल या गोलाकार वस्तु किसी सतह पर लुढ़कती है, और यह
सर्पी घर्षण से कम होता है।
चूंकि लोटनिक घर्षण कम होता है, इसलिए पहियेदार सामान को कम प्रयास की आवश्यकता होती है। उदाहरण
— वाहन के पहिये, फुटबॉल, स्केटबोर्ड के पहिये।
RRB JE 29/05/2019 (Evening)
865
Using brake pads in the brake system of bicycles and automobiles is for what purpose?
साइकिल और वाहनों की ब्रेक प्रणाली में ब्रेक पैड का उपयोग किस उद्देश्य के लिए किया
जाता है?
✅ Correct Answer: (C)
Friction can be increased by making surfaces rough, pressing surfaces harder together,
removing lubrication, using sliding rather than rolling motion, or increasing contact area.
Friction can be reduced by lubricating surfaces, using ball bearings (replacing sliding
friction with rolling friction), or streamlining the body.
Brake pads are pressed against the wheel to create friction, which slows or stops the
vehicle.
घर्षण को सतहों को खुरदरा बनाकर, सतहों को अधिक जोर से दबाकर, स्नेहन हटाकर, लुढ़कने के बजाय
फिसलने वाली गति का उपयोग करके, या संपर्क क्षेत्र बढ़ाकर बढ़ाया जा सकता है।
घर्षण को सतहों को चिकना करके, बॉल बेयरिंग का उपयोग करके (सर्पी घर्षण को लोटनिक घर्षण से
बदलकर), या पिंड को सुव्यवस्थित (streamline) करके कम किया जा सकता है।
ब्रेक पैड को पहिये के विरुद्ध दबाया जाता है ताकि घर्षण उत्पन्न हो, जो वाहन को धीमा या रोक
देता है।
RRB JE 30/05/2019 (Morning)
866
What are the three main lubricants used in moving parts of a machine?
मशीन के गतिशील पुर्जों में उपयोग किए जाने वाले तीन मुख्य स्नेहक कौन से हैं?
✅ Correct Answer: (A)
Lubricants are substances used to facilitate the relative motion of solid bodies by
minimizing friction and wear between interacting surfaces.
Main functions — avoiding machine wear, corrosion protection, cooling by dissipating heat,
and cleaning by transporting dirt particles to the filter.
The three main lubricants are oil (liquid), grease (semi-solid), and graphite (solid
lubricant).
स्नेहक ऐसे पदार्थ हैं जो अंतःक्रियाशील सतहों के बीच घर्षण और घिसाव को कम करके ठोस पिंडों की
सापेक्ष गति को सुगम बनाते हैं।
मुख्य कार्य — मशीन के घिसाव को रोकना, संक्षारण से सुरक्षा, ऊष्मा के अपव्यय द्वारा शीतलन, और
गंदगी के कणों को फिल्टर तक पहुंचाकर सफाई करना।
तीन मुख्य स्नेहक हैं — तेल (तरल), ग्रीस (अर्ध-ठोस), और ग्रेफाइट (ठोस स्नेहक)।
RRB JE 30/05/2019 (Afternoon)
867
The stretching of a spring due to the force in a spring balance is measured by:
स्प्रिंग तुला में बल के कारण स्प्रिंग के खिंचाव को कैसे मापा जाता है?
✅ Correct Answer: (B)
A spring balance is a simple device used to measure weight or force, working on the
principle of Hooke's law: F = -Kx (F = force, x = displacement, k = spring constant).
As the spring stretches, a pointer attached to it moves along a graduated scale, showing the
magnitude of the force.
Types of springs — helical, leaf, torsion, disc, conical volute, special purpose.
स्प्रिंग तुला एक साधारण उपकरण है जो भार या बल मापने के लिए उपयोग होता है, जो हुक के नियम पर
कार्य करता है: F = -Kx (F = बल, x = विस्थापन, k = स्प्रिंग नियतांक)।
जैसे-जैसे स्प्रिंग खिंचता है, उससे जुड़ा सूचक एक अंशांकित पैमाने पर चलता है, जो बल का परिमाण
दर्शाता है।
स्प्रिंग के प्रकार — हेलिकल, पत्ती (leaf), टॉर्शन, डिस्क, कोनिकल वोल्यूट, विशेष प्रयोजन
स्प्रिंग।
RRB JE 30/05/2019 (Evening)
868
The frictional force on an object in a fluid depends on what?
किसी तरल में किसी वस्तु पर लगने वाला घर्षण बल किस पर निर्भर करता है?
✅ Correct Answer: (B)
Viscosity is a measure of a fluid's thickness and resistance to flow; high viscosity fluids
flow slowly, low viscosity fluids flow easily.
Units of viscosity — Newton-second per square metre (Ns/m²) or pascal-second (Pa.s);
dimensional formula [ML⁻¹T⁻¹].
The frictional force (drag) in a fluid depends on the nature of the fluid (viscosity), the
speed of the object relative to the fluid, and the shape of the object.
श्यानता (viscosity) किसी तरल की मोटाई और प्रवाह के प्रतिरोध का माप है; उच्च श्यानता वाले तरल
धीरे बहते हैं, कम श्यानता वाले आसानी से बहते हैं।
श्यानता की इकाइयां — न्यूटन-सेकंड प्रति वर्ग मीटर (Ns/m²) या पास्कल-सेकंड (Pa.s); विमीय
सूत्र [ML⁻¹T⁻¹]।
तरल में घर्षण बल (ड्रैग) तरल की प्रकृति (श्यानता), तरल के सापेक्ष वस्तु की गति, और वस्तु के
आकार पर निर्भर करता है।
RRB JE 31/05/2019 (Morning)
869
What is the force required to overcome friction at the instant an object starts
moving from rest?
जिस क्षण कोई वस्तु विराम अवस्था से गति करना शुरू करती है, उस समय घर्षण को दूर करने के
लिए आवश्यक बल क्या कहलाता है?
✅ Correct Answer: (A)
Static friction is a force that keeps an object at rest. Examples — papers on a tabletop, a
car parked on a hill, a towel hanging on a rack.
The force required to overcome static friction at the instant an object starts moving from
rest is the maximum static friction force.
Rolling friction acts on rolling objects (e.g., ball bearings); sliding friction acts on
objects sliding against each other (e.g., a coaster sliding on a table).
स्थैतिक घर्षण वह बल है जो किसी वस्तु को विराम में रखता है। उदाहरण — मेज पर रखे कागज, पहाड़ी
पर खड़ी कार, रैक पर लटका तौलिया।
जिस क्षण कोई वस्तु विराम से गति करना शुरू करती है, उस समय स्थैतिक घर्षण को पार करने के लिए
आवश्यक बल अधिकतम स्थैतिक घर्षण बल कहलाता है।
लोटनिक घर्षण लुढ़कती वस्तुओं पर कार्य करता है (जैसे बॉल बेयरिंग); सर्पी घर्षण एक-दूसरे पर
फिसलती वस्तुओं पर कार्य करता है (जैसे मेज पर फिसलता कोस्टर)।
RRB JE 31/05/2019 (Afternoon)
870
Which of the following forces acts on an object perpendicular to the surface?
निम्नलिखित में से कौन सा बल किसी वस्तु पर सतह के लंबवत कार्य करता है?
✅ Correct Answer: (D)
Thrust is a force or push (mostly reactive) — when a system pushes or accelerates mass in
one direction, an equal thrust acts in the opposite direction. Formula: T = v(dm/dt). SI
unit — Newton.
Thrust acts perpendicular to the surface of an object.
Spring force is a restoring force from a stretched/compressed spring; mechanical force
involves direct contact between objects; magnetic force arises between charged particles due
to their motion.
प्रणोद (thrust) एक बल या धक्का है (अधिकतर प्रतिक्रियात्मक) — जब कोई तंत्र एक दिशा में
द्रव्यमान को धकेलता या त्वरित करता है, तो विपरीत दिशा में उतना ही प्रणोद कार्य करता है।
सूत्र: T = v(dm/dt)। SI मात्रक — न्यूटन।
प्रणोद किसी वस्तु की सतह के लंबवत कार्य करता है।
स्प्रिंग बल खिंचे/दबे हुए स्प्रिंग से उत्पन्न प्रत्यानयन बल है; यांत्रिक बल में वस्तुओं के
बीच प्रत्यक्ष संपर्क होता है; चुंबकीय बल आवेशित कणों की गति के कारण उत्पन्न होता है।
RRB JE 31/05/2019 (Evening)
871
What placed between moving parts of a machine can reduce friction?
मशीन के गतिशील पुर्जों के बीच क्या रखने से घर्षण कम हो सकता है?
✅ Correct Answer: (A)
An air cushion forms a thin layer between surfaces so they do not directly rub each other,
similar to a lubricant but using air.
Other techniques to reduce friction — lubricants, which form a thin layer between surfaces
(e.g., engine oil).
वायु गद्दी (air cushion) सतहों के बीच एक पतली परत बनाती है ताकि वे सीधे एक-दूसरे से न
रगड़ें, यह स्नेहक के समान है परंतु वायु का उपयोग करता है।
घर्षण कम करने की अन्य तकनीक — स्नेहक, जो सतहों के बीच एक पतली परत बनाते हैं (जैसे इंजन तेल)।
खुरदरी सतहें घर्षण बढ़ाती हैं। घर्षण के प्रकार — लोटनिक, सर्पी, स्थैतिक, तरल।
RRB JE 31/05/2019 (Evening)
872
Which machine part is used to reduce friction between hubs and axles of ceiling fans
and in bicycles?
सीलिंग फैन और साइकिल में हब और एक्सल के बीच घर्षण कम करने के लिए किस मशीन पुर्जे का
उपयोग किया जाता है?
✅ Correct Answer: (A)
A ball bearing is a device consisting of a ring of small metal balls. The axle is fixed on
the inner side, and the wheel on the outer side, of the ball bearing.
Ball bearings replace sliding friction with rolling friction, which is much lower.
Other methods of reducing friction — lubricating the surfaces (oil and grease).
बॉल बेयरिंग एक उपकरण है जिसमें छोटी धातु की गेंदों का एक छल्ला होता है। एक्सल बॉल बेयरिंग के
भीतरी हिस्से पर और पहिया बाहरी हिस्से पर स्थिर होता है।
बॉल बेयरिंग सर्पी घर्षण को लोटनिक घर्षण से बदल देते हैं, जो बहुत कम होता है।
घर्षण कम करने के अन्य तरीके — सतहों को चिकना करना (तेल और ग्रीस)।
RRB JE 01/06/2019 (Morning)
873
Why does a nail have a pointed tip?
कील की नोक नुकीली क्यों होती है?
✅ Correct Answer: (B)
A nail has a pointed end so that its surface area is less; less surface area increases
pressure (P = F/A), making it easier to drive into the wall.
Pressure (P) is the force exerted perpendicular to the surface of an object, per unit area.
Basic formula for pressure — F/A (Force per unit area). Unit of pressure — Pascal (Pa).
कील की नोक इसलिए नुकीली होती है ताकि उसका सतह क्षेत्रफल कम हो; क्षेत्रफल कम होने से दाब
बढ़ता है (P = F/A), जिससे कील को दीवार में घुसाना आसान हो जाता है।
दाब (P) किसी वस्तु की सतह पर प्रति इकाई क्षेत्रफल पर लंबवत लगाया गया बल है।
दाब का मूल सूत्र — F/A (प्रति इकाई क्षेत्रफल बल)। दाब की इकाई — पास्कल (Pa)।
RRB JE 01/06/2019 (Morning)
874
In a spring balance, which part is stretched when a force is applied?
स्प्रिंग तुला में बल लगाने पर कौन सा भाग खिंचता है?
✅ Correct Answer: (B)
A spring balance is a simple device used to measure weight or force, consisting of a coiled
spring attached to a pointer and a calibrated scale.
When a force is applied to the spring, it stretches, and the pointer moves along the scale,
indicating the magnitude of the force.
Types of springs — compression, extension, spiral, torsion. Nylon is a strong, flexible
artificial fiber, not part of the stretching mechanism here.
स्प्रिंग तुला एक साधारण उपकरण है जो भार या बल मापने के लिए उपयोग होता है, इसमें एक कुंडलित
स्प्रिंग एक सूचक और अंशांकित पैमाने से जुड़ी होती है।
जब स्प्रिंग पर बल लगाया जाता है, तो वह खिंचती है, और सूचक पैमाने पर चलता है, जो बल का परिमाण
दर्शाता है।
स्प्रिंग के प्रकार — संपीडन (compression), विस्तार (extension), सर्पिल (spiral), टॉर्शन।
नायलॉन एक मजबूत, लचीला कृत्रिम रेशा है, यह यहां खिंचाव तंत्र का भाग नहीं है।
RRB JE 01/06/2019 (Afternoon)
875
Compare static friction and sliding friction.
स्थैतिक घर्षण और सर्पी घर्षण की तुलना करें।
✅ Correct Answer: (A)
Static friction is the maximum force exerted by a surface on a body so long as it remains
stationary. Examples — pushing heavy objects, load on a conveyor belt.
Sliding friction is the resistance created by two objects sliding against each other.
Example — a coaster sliding on a table.
In general — static friction is slightly greater than sliding friction, i.e., sliding
friction is slightly smaller.
स्थैतिक घर्षण वह अधिकतम बल है जो किसी सतह द्वारा किसी पिंड पर तब तक लगाया जाता है जब तक वह
स्थिर रहता है। उदाहरण — भारी वस्तुओं को धकेलना, कन्वेयर बेल्ट पर भार।
सर्पी घर्षण दो वस्तुओं के एक-दूसरे पर फिसलने से उत्पन्न प्रतिरोध है। उदाहरण — मेज पर फिसलता
कोस्टर।
सामान्यतः — स्थैतिक घर्षण सर्पी घर्षण से थोड़ा अधिक होता है, अर्थात सर्पी घर्षण थोड़ा कम
होता है।
RRB JE 01/06/2019 (Evening)
876
The inertia of an object tends to cause the object to:
किसी वस्तु का जड़त्व उस वस्तु को क्या करने की प्रवृत्ति देता है?
✅ Correct Answer: (B)
Inertia is the tendency of an object to continue its state of rest or uniform motion until
an external force is applied.
Inertia is directly proportional to the mass of the object.
Formula: I = L/ω, where I is inertia (moment of inertia), L is angular momentum,
ω is angular velocity.
जड़त्व किसी वस्तु की अपनी विराम अवस्था या एकसमान गति की स्थिति को बनाए रखने की प्रवृत्ति है,
जब तक कोई बाह्य बल न लगाया जाए।
जड़त्व वस्तु के द्रव्यमान के सीधे समानुपाती होता है।
सूत्र: I = L/ω, जहां I जड़त्व (जड़त्व आघूर्ण), L कोणीय संवेग, और ω कोणीय वेग है।
RRB JE 02/06/2019 (Morning)
877
If lubricants are used in machine parts, how does the movement become?
यदि मशीन के पुर्जों में स्नेहक का उपयोग किया जाए, तो गति कैसी हो जाती है?
✅ Correct Answer: (A)
Lubricants form a thin layer between surfaces to reduce friction. Example — engine oil,
grease.
A rough surface increases friction. Types of friction — rolling, sliding, static, fluid.
By reducing friction, lubricants allow parts to move smoothly against each other.
स्नेहक सतहों के बीच एक पतली परत बनाते हैं ताकि घर्षण कम हो। उदाहरण — इंजन तेल, ग्रीस।
खुरदरी सतह घर्षण बढ़ाती है। घर्षण के प्रकार — लोटनिक, सर्पी, स्थैतिक, तरल।
घर्षण कम करके स्नेहक पुर्जों को एक-दूसरे के विरुद्ध सहज गति करने में सक्षम बनाते हैं।
RRB JE 02/06/2019 (Morning)
878
'Drag' is the name given to frictional forces exerted by what?
'ड्रैग' किसके द्वारा लगाए गए घर्षण बल को दिया गया नाम है?
✅ Correct Answer: (A)
Drag forces always act in the direction opposite to fluid flow. Example — drag on a ship
moving through water.
Buoyancy (upthrust) is an upward force exerted by a fluid to oppose the weight of an
immersed object.
Frictional force is created when two surfaces come into contact and slide against each
other, while drag is specifically the frictional force from fluids.
ड्रैग बल हमेशा तरल के प्रवाह की विपरीत दिशा में कार्य करता है। उदाहरण — जल में गतिमान जहाज
पर ड्रैग।
उत्प्लावन (buoyancy) एक ऊपर की ओर बल है जो किसी तरल द्वारा डूबी वस्तु के भार का विरोध करने
के लिए लगाया जाता है।
घर्षण बल तब उत्पन्न होता है जब दो सतहें संपर्क में आती हैं और एक-दूसरे पर फिसलती हैं, जबकि
ड्रैग विशेष रूप से तरल पदार्थों द्वारा उत्पन्न घर्षण बल है।
RRB JE 02/06/2019 (Afternoon)
879
Which force is exerted by air on objects moving through it?
वायु में गतिमान वस्तुओं पर वायु द्वारा कौन सा बल लगाया जाता है?
✅ Correct Answer: (B)
Frictional force is generated by two surfaces that contact and slide against each other.
Example — rubbing hands, climbing a rock.
The friction exerted by air on moving objects is called air resistance or drag.
Force of gravity attracts all masses; magnetic force arises from interactions with a
magnetic field; electrostatic (Coulomb) force is due to electric charge.
घर्षण बल दो सतहों के संपर्क में आने और एक-दूसरे पर फिसलने से उत्पन्न होता है। उदाहरण — हाथ
रगड़ना, चट्टान पर चढ़ना।
वायु द्वारा गतिमान वस्तुओं पर लगाया गया घर्षण वायु प्रतिरोध या ड्रैग कहलाता है।
गुरुत्व बल सभी द्रव्यमानों को आकर्षित करता है; चुंबकीय बल चुंबकीय क्षेत्र के साथ अंतःक्रिया
से उत्पन्न होता है; स्थैतिक विद्युत (कूलॉम) बल विद्युत आवेश के कारण होता है।
RRB JE 02/06/2019 (Evening)
880
Which force is exerted by liquids on objects moving through them?
तरल पदार्थों में गतिमान वस्तुओं पर तरल द्वारा कौन सा बल लगाया जाता है?
✅ Correct Answer: (D)
Frictional force exerted by fluids (air and water) on objects moving through them is known
as "drag".
Electrostatic force is the attraction or repulsion between two charged particles due to
their electric charges.
Magnetic force arises between electrically charged particles due to their motion; force of
gravity (gravitational force) pulls objects with mass towards each other.
तरल पदार्थों (वायु और जल) द्वारा उनमें गतिमान वस्तुओं पर लगाया गया घर्षण बल "ड्रैग" कहलाता
है।
स्थैतिक विद्युत बल दो आवेशित कणों के बीच उनके विद्युत आवेश के कारण आकर्षण या प्रतिकर्षण है।
चुंबकीय बल विद्युत आवेशित कणों की गति के कारण उत्पन्न होता है; गुरुत्व बल (गुरुत्वाकर्षण बल)
द्रव्यमान वाली वस्तुओं को एक-दूसरे की ओर खींचता है।
RRB JE 26/06/2019 (Evening)
881
To increase the friction and to get a better grip of the ball, what does a cricket
bowler do?
गेंद पर घर्षण बढ़ाने और बेहतर पकड़ पाने के लिए क्रिकेट गेंदबाज क्या करता है?
✅ Correct Answer: (B)
This action is called 'polishing the ball'. Cricketers shine the ball because it increases
the chances of the bowler getting the ball to swing in the air.
Friction is the force that resists the sliding or rolling of one solid object over another.
Rubbing the ball on the thigh creates friction that smoothens one side while the other side
remains rough, causing differential air resistance and swing.
Other examples of friction — driving a vehicle on a surface, applying brakes, skating.
इस क्रिया को 'बॉल पॉलिश करना' कहा जाता है। क्रिकेटर गेंद को चमकाते हैं क्योंकि इससे गेंदबाज
के लिए हवा में गेंद को स्विंग कराने की संभावना बढ़ जाती है।
घर्षण वह बल है जो किसी ठोस वस्तु के दूसरी वस्तु पर फिसलने या लुढ़कने का विरोध करता है। जांघ
पर गेंद रगड़ने से घर्षण उत्पन्न होता है जो एक तरफ को चिकना बनाता है जबकि दूसरी तरफ खुरदरी
रहती है, जिससे भिन्न वायु प्रतिरोध और स्विंग होता है।
घर्षण के अन्य उदाहरण — सतह पर वाहन चलाना, ब्रेक लगाना, स्केटिंग करना।
RRB JE 27/06/2019 (Morning)
882
Which force acts in the direction opposite to the motion of the object, which is
between the surface of the ground and the object opposing the motion of the object?
वस्तु की गति के विपरीत दिशा में कौन सा बल कार्य करता है, जो जमीन की सतह और वस्तु के
बीच वस्तु की गति का विरोध करता है?
✅ Correct Answer: (D)
Frictional force is generated by two surfaces that contact and slide against each other; it
always acts opposite to the direction of motion and depends on the nature of surfaces in
contact.
Gravitational force is the mutual attraction between objects with mass.
Magnetic force is the attraction or repulsion between electrically charged particles due to
their motion; muscular force is generated by muscles during contraction.
घर्षण बल दो सतहों के संपर्क में आने और एक-दूसरे पर फिसलने से उत्पन्न होता है; यह हमेशा गति
की विपरीत दिशा में कार्य करता है और संपर्क में आने वाली सतहों की प्रकृति पर निर्भर करता है।
गुरुत्वाकर्षण बल द्रव्यमान वाली वस्तुओं के बीच परस्पर आकर्षण है।
चुंबकीय बल विद्युत आवेशित कणों की गति के कारण आकर्षण या प्रतिकर्षण है; पेशीय बल मांसपेशियों
के संकुचन के दौरान उत्पन्न होता है।
RRB JE 28/06/2019 (Evening)
883
The relative speed of the two surfaces in contact with each other due to friction is
_____.
घर्षण के कारण संपर्क में आने वाली दो सतहों की सापेक्ष गति _____ है।
✅ Correct Answer: (D)
Friction is a contact force that always opposes the relative motion of two objects in
contact, acting opposite to the direction of the object's motion.
Static friction occurs when the body is at rest; dynamic friction occurs when the body is in
motion. Static friction is greater than dynamic friction.
Friction always opposes (conflicts with) the relative motion between the two surfaces.
घर्षण एक संपर्क बल है जो सदैव संपर्क में आने वाली दो वस्तुओं की सापेक्ष गति का विरोध करता
है, वस्तु की गति की विपरीत दिशा में कार्य करते हुए।
स्थैतिक घर्षण तब होता है जब पिंड विराम में होता है; गतिज घर्षण तब होता है जब पिंड गति में
होता है। स्थैतिक घर्षण गतिज घर्षण से अधिक होता है।
घर्षण हमेशा दो सतहों के बीच सापेक्ष गति का विरोध करता है (उसे बाधित करता है)।
RPF Constable 17/01/2019 (Morning)
884
'ATM' is a unit of measuring _______ used by gas.
'ATM' गैस द्वारा उपयोग किए जाने वाले _______ को मापने की इकाई है।
✅ Correct Answer: (A)
Pressure is the force exerted on a surface per unit area; ATM is approximately equal to
Earth's average atmospheric pressure at sea level.
Temperature — measure of hotness/coldness, SI unit kelvin. Radiation — energy travelling at
the speed of light, SI unit becquerel. Convection — heat transfer by movement of a heated
fluid.
दाब किसी सतह पर प्रति इकाई क्षेत्रफल पर लगाया गया बल है; ATM लगभग समुद्र तल पर पृथ्वी के औसत
वायुमंडलीय दाब के बराबर है।
तापमान — किसी पिंड की गर्मी या ठंडक का माप, SI मात्रक केल्विन। विकिरण — प्रकाश की गति से
यात्रा करने वाली ऊर्जा, SI मात्रक बेकरल। संवहन — गर्म तरल की गति द्वारा ऊष्मा स्थानांतरण।
RPF Constable 18/01/2019 (Evening)
885
The force acting on a unit area of the surface is called _______.
सतह के इकाई क्षेत्रफल पर कार्य करने वाला बल _______ कहलाता है।
✅ Correct Answer: (A)
Pressure — formula: Pressure = Force/Area. Unit — Newton/metre² (Pascal).
Torque — a measure of force that causes an object to rotate about an axis. Formula: Force ×
radius × sinθ. Unit — Newton-metre.
Density — mass of a unit volume of a substance. Formula: Mass/Volume. Unit — Kg/metre³.
बलआघूर्ण — वह माप जो किसी वस्तु को अक्ष के चारों ओर घुमाने का कारण बनता है। सूत्र: बल ×
त्रिज्या × sinθ। इकाई — न्यूटन-मीटर।
घनत्व — किसी पदार्थ के इकाई आयतन का द्रव्यमान। सूत्र: द्रव्यमान/आयतन। इकाई —
किग्रा/मीटर³।
RPF Constable 18/01/2019 (Evening)
886
What is the friction force employed between the two surfaces interacting in relative
speed?
सापेक्ष गति में अंतःक्रिया करने वाली दो सतहों के बीच लगने वाला घर्षण बल क्या कहलाता
है?
✅ Correct Answer: (B)
Dynamic friction, also called kinetic friction, acts between surfaces that are in relative
motion (sliding or rolling) against each other.
Rolling friction occurs when an object rolls over a surface and is generally lower than
dynamic friction.
Limiting friction is the maximum friction before sliding begins; static friction acts
between surfaces in contact but not moving relative to each other.
गतिज घर्षण, जिसे डायनामिक घर्षण भी कहते हैं, उन सतहों के बीच कार्य करता है जो एक-दूसरे के
सापेक्ष गति (फिसलने या लुढ़कने) में हैं।
लोटनिक घर्षण तब उत्पन्न होता है जब कोई वस्तु किसी सतह पर लुढ़कती है, और यह सामान्यतः गतिज
घर्षण से कम होता है।
सीमांत घर्षण फिसलन शुरू होने से पहले अधिकतम घर्षण है; स्थैतिक घर्षण उन सतहों के बीच कार्य
करता है जो संपर्क में हैं परंतु एक-दूसरे के सापेक्ष गतिहीन हैं।
RPF Constable 03/02/2019 (Morning)
887
Which of the following illustrates Newton's third law of motion?
निम्नलिखित में से कौन सा न्यूटन के गति के तीसरे नियम को दर्शाता है?
✅ Correct Answer: (C)
Newton's Third Law — every action has an equal and opposite reaction. In rockets, engine
action produces hot exhaust gases creating thrust, generating a reactionary force in the
opposite direction that propels the rocket forward.
Newton's First Law (law of inertia) — an object remains at rest or in uniform motion unless
acted upon by an external force (illustrated by option A).
Newton's Second Law — rate of change of momentum is directly proportional to applied force
(illustrated by option B, the impulse-momentum theorem).
न्यूटन का तीसरा नियम — प्रत्येक क्रिया के बराबर और विपरीत प्रतिक्रिया होती है। रॉकेट में,
इंजन की क्रिया गर्म निकास गैसें उत्पन्न करती है जो प्रणोद बनाती हैं, जिससे विपरीत दिशा में
प्रतिक्रिया बल उत्पन्न होता है जो रॉकेट को आगे बढ़ाता है।
न्यूटन का पहला नियम (जड़त्व का नियम) — कोई वस्तु विराम में या एकसमान गति में रहती है जब तक
उस पर बाह्य बल न लगे (विकल्प A द्वारा दर्शाया गया)।
न्यूटन का दूसरा नियम — संवेग में परिवर्तन की दर लगाए गए बल के समानुपाती होती है (विकल्प B
आवेग-संवेग प्रमेय को दर्शाता है)।
RRB Group D 17/09/2018 (Morning)
888
As long as an unbalanced force is applied to a body, there is a continuous change in
its:
जब तक किसी पिंड पर असंतुलित बल लगाया जाता है, तब तक उसमें निरंतर परिवर्तन होता रहता
है:
✅ Correct Answer: (C)
An unbalanced force causes acceleration according to Newton's second law of motion (F = m ×
a).
This acceleration results in a continuous change in the speed of the body.
As long as the unbalanced force is applied, the body's speed continues to change, either
increasing or decreasing depending on the direction of the force relative to the initial
velocity.
न्यूटन के दूसरे नियम (F = m × a) के अनुसार असंतुलित बल त्वरण उत्पन्न करता है।
इस त्वरण के कारण पिंड की चाल में निरंतर परिवर्तन होता है।
जब तक असंतुलित बल लगाया जाता है, पिंड की चाल में परिवर्तन होता रहता है, जो बल की दिशा और
प्रारंभिक वेग के आधार पर बढ़ या घट सकती है।
RRB Group D 17/09/2018 (Morning)
889
'When a card placed over a tumbler is flicked with the finger, the coin placed over
it falls in the tumbler'. This illustrates:
'जब गिलास के ऊपर रखे कार्ड को उंगली से झटका जाता है, तो उसके ऊपर रखा सिक्का गिलास में
गिर जाता है।' यह दर्शाता है:
✅ Correct Answer: (C)
Law of Inertia (Newton's First Law) states that an object continues in its state of rest or
motion unless an external force acts on it.
When the card is flicked away, the coin remains momentarily at rest due to inertia and then
falls into the tumbler due to gravity.
Examples — the backward jerk when a stationary bus starts moving, jerk when a lift operates
suddenly, moving forward on sudden braking, an athlete taking a short run before a jump.
जड़त्व का नियम (न्यूटन का पहला नियम) कहता है कि कोई वस्तु अपनी विराम या गति की अवस्था में
रहती है जब तक उस पर कोई बाह्य बल न लगे।
जब कार्ड को झटका जाता है, तो सिक्का जड़त्व के कारण क्षणिक रूप से विराम में रहता है और फिर
गुरुत्व के कारण गिलास में गिर जाता है।
उदाहरण — खड़ी बस के चलने पर पीछे की ओर झटका, लिफ्ट के अचानक चलने पर झटका, अचानक ब्रेक लगने
पर आगे की ओर झुकना, कूदने से पहले एथलीट का छोटा दौड़ लगाना।
RRB Group D 17/09/2018 (Afternoon)
890
The action done by the force is positive when:
बल द्वारा किया गया कार्य धनात्मक होता है जब:
✅ Correct Answer: (B)
When a force acts on an object and moves it in the same direction as the force, the work
done is positive (W = Fd cos 0° = Fd, positive).
When displacement is perpendicular to force, work done is zero (cos 90° = 0). If there is no
displacement, no work is done.
When displacement is opposite to force, work done is negative (cos 180° = -1).
जब बल किसी वस्तु पर कार्य करता है और उसे बल की ही दिशा में गति देता है, तो किया गया कार्य
धनात्मक होता है (W = Fd cos 0° = Fd, धनात्मक)।
जब विस्थापन बल के लंबवत होता है, तो कार्य शून्य होता है (cos 90° = 0)। यदि कोई विस्थापन नहीं
होता, तो कोई कार्य नहीं होता।
जब विस्थापन बल के विपरीत होता है, तो किया गया कार्य ऋणात्मक होता है (cos 180° = -1)।
RRB Group D 19/09/2018 (Evening)
891
When acceleration is negative, the velocity of a body:
जब त्वरण ऋणात्मक होता है, तो किसी पिंड का वेग:
✅ Correct Answer: (D)
The direction of acceleration determines whether an object is slowing down — if it is
slowing down, the acceleration is opposite to the direction of motion.
Hence, with negative acceleration (deceleration/retardation), the velocity of a body
decreases.
त्वरण की दिशा यह निर्धारित करती है कि वस्तु धीमी हो रही है या नहीं — यदि वस्तु धीमी हो रही
है, तो त्वरण गति की विपरीत दिशा में होता है।
इसलिए, ऋणात्मक त्वरण (मंदन/अवरोध) के साथ, किसी पिंड का वेग घट जाता है।
RRB Group D 19/09/2018 (Evening)
892
The tendency of a body to resist change in a state of rest or state of motion is
called ___________.
किसी पिंड की विराम अवस्था या गति अवस्था में परिवर्तन का विरोध करने की प्रवृत्ति
___________ कहलाती है।
✅ Correct Answer: (B)
Inertia (kg m²) — the tendency of a body to resist any change in its state.
Momentum (kg m/s) — the product of a particle's mass and velocity, a vector quantity.
Force (Newton) — an external agent capable of changing a body's state of rest or motion.
Velocity (m/s) — displacement of an object per unit time interval.
जड़त्व (kg m²) — किसी पिंड की अपनी अवस्था में किसी भी परिवर्तन का विरोध करने की
प्रवृत्ति।
संवेग (kg m/s) — किसी कण के द्रव्यमान और वेग का गुणनफल, एक सदिश राशि।
बल (न्यूटन) — एक बाह्य कारक जो किसी पिंड की विराम या गति की अवस्था को बदलने में सक्षम है।
वेग (m/s) — प्रति इकाई समय में वस्तु का विस्थापन।
RRB Group D 20/09/2018 (Afternoon)
893
_____ never occurs singly in nature.
_____ प्रकृति में कभी अकेले नहीं होता।
✅ Correct Answer: (A)
Force (Newton) is the mutual interaction between two bodies; it never occurs singly since
for every force there is always an equal and opposite reaction force (Newton's Third Law).
Momentum (kg m/s) is the product of mass and velocity of the body.
Velocity (m/s) is the displacement per unit time; pressure (Pascal) is force applied per
unit area perpendicular to the surface.
बल (न्यूटन) दो पिंडों के बीच पारस्परिक अंतःक्रिया है; यह कभी अकेले नहीं होता क्योंकि हर बल
की एक बराबर और विपरीत प्रतिक्रिया होती है (न्यूटन का तीसरा नियम)।
संवेग (kg m/s) पिंड के द्रव्यमान और वेग का गुणनफल है।
वेग (m/s) प्रति इकाई समय विस्थापन है; दाब (पास्कल) वस्तु की सतह के लंबवत प्रति इकाई
क्षेत्रफल लगाया गया बल है।
RRB Group D 20/09/2018 (Afternoon)
894
Friction force does work _______.
घर्षण बल _______ कार्य करता है।
✅ Correct Answer: (A)
Friction always acts in the direction opposite to movement, opposing the motion of the
object.
For example, air resistance is a frictional force that opposes motion through the air.
Friction is caused by irregularities on the two surfaces in contact.
Therefore, friction does work opposite to the direction of force (negative work).
घर्षण हमेशा गति की विपरीत दिशा में कार्य करता है, वस्तु की गति का विरोध करते हुए।
उदाहरण के लिए, वायु प्रतिरोध एक घर्षण बल है जो वायु में गति का विरोध करता है। घर्षण संपर्क
में आने वाली दो सतहों की अनियमितताओं के कारण उत्पन्न होता है।
इसलिए, घर्षण बल की विपरीत दिशा में कार्य करता है (ऋणात्मक कार्य)।
RRB Group D 22/09/2018 (Morning)
895
The rate of change of momentum of a body is directly proportional to the __________.
किसी पिंड के संवेग में परिवर्तन की दर __________ के सीधे समानुपाती होती है।
✅ Correct Answer: (B)
Applied force is an interaction of one object on another that causes the second object to
accelerate or change velocity/direction.
According to Newton's Second Law, the rate of change of momentum is directly proportional to
the applied force, in the direction of the applied force.
Momentum (p) is the product of mass and velocity, a vector quantity in the direction of
velocity. p = mv. Unit — kg m/s.
लगाया गया बल एक वस्तु की दूसरी पर अंतःक्रिया है जो दूसरी वस्तु को त्वरित करती है या उसका
वेग/दिशा बदलती है।
न्यूटन के दूसरे नियम के अनुसार, संवेग में परिवर्तन की दर लगाए गए बल के सीधे समानुपाती होती
है, और उसी दिशा में होती है।
संवेग (p) द्रव्यमान और वेग का गुणनफल है, वेग की दिशा में एक सदिश राशि। p = mv। इकाई — kg
m/s।
RRB Group D 22/09/2018 (Evening)
896
The rate of change of displacement with time is called:
समय के साथ विस्थापन में परिवर्तन की दर क्या कहलाती है?
✅ Correct Answer: (C)
Velocity is a vector quantity that measures the rate at which an object changes its position
in a particular direction with respect to time. Velocity = displacement/time.
Acceleration is the rate of change of velocity with respect to time.
Force is any interaction that, when unopposed, will change the motion of an object.
वेग एक सदिश राशि है जो किसी वस्तु की समय के सापेक्ष एक निश्चित दिशा में स्थिति परिवर्तन की
दर मापती है। वेग = विस्थापन/समय।
त्वरण समय के सापेक्ष वेग में परिवर्तन की दर है।
बल कोई भी ऐसी अंतःक्रिया है जो, यदि अप्रतिरोधित हो, तो किसी वस्तु की गति को बदल देती है।
RRB Group D 23/09/2018 (Morning)
897
Which of the following is the equation showing the relationship between velocity and
time?
निम्नलिखित में से कौन सा समीकरण वेग और समय के बीच संबंध दर्शाता है?
✅ Correct Answer: (D)
v = u + at is the first equation of motion, giving the velocity-time relation, relating
final velocity (v), initial velocity (u), acceleration (a), and time (t).
s = ut + (1/2)at² is the second equation of motion (position-time relation).
2as = v² - u² is the third equation of motion (position-velocity relation).
v = u + at गति का पहला समीकरण है, जो वेग-समय संबंध देता है, जिसमें अंतिम वेग (v), प्रारंभिक
वेग (u), त्वरण (a), और समय (t) शामिल हैं।
s = ut + (1/2)at² गति का दूसरा समीकरण है (स्थिति-समय संबंध)।
2as = v² - u² गति का तीसरा समीकरण है (स्थिति-वेग संबंध)।
RRB Group D 24/09/2018 (Morning)
898
Select the most appropriate option. Momentum has ___________.
सबसे उपयुक्त विकल्प चुनें। संवेग में ___________ होता है।
✅ Correct Answer: (B)
Momentum is a measurement of mass in motion; the momentum p of an object is defined as the
product of its mass m and velocity v (p = mv).
It is a vector quantity, having both magnitude and direction.
The SI unit of momentum is kilogram-metre per second (kg m s⁻¹).
संवेग गति में द्रव्यमान का माप है; किसी वस्तु का संवेग p उसके द्रव्यमान m और वेग v के गुणनफल
के रूप में परिभाषित किया जाता है (p = mv)।
यह एक सदिश राशि है, जिसमें परिमाण और दिशा दोनों होते हैं।
संवेग की SI इकाई किलोग्राम-मीटर प्रति सेकंड (kg m s⁻¹) है।
RRB Group D 24/09/2018 (Evening)
899
Compressions are formed at places where air pressure is:
संपीडन (compressions) उन स्थानों पर बनते हैं जहां वायु दाब होता है:
✅ Correct Answer: (C)
The region of high pressure and high density is called compression, and the region of low
pressure and low density in the air is called rarefaction.
These are the two parts of a longitudinal wave, such as sound waves.
उच्च दाब और उच्च घनत्व वाला क्षेत्र संपीडन कहलाता है, और वायु में निम्न दाब व निम्न घनत्व
वाला क्षेत्र विरलन (rarefaction) कहलाता है।
ये अनुदैर्ध्य तरंग (जैसे ध्वनि तरंगें) के दो भाग हैं।
RRB Group D 24/09/2018 (Evening)
900
The effect of stress depends on which of the following?
प्रतिबल (stress) का प्रभाव निम्नलिखित में से किस पर निर्भर करता है?
✅ Correct Answer: (A)
The restoring force per unit area is known as stress. If F is the force applied normal to
the cross-section and A is the area, magnitude of stress = F/A.
The SI unit of stress is Nm⁻² or pascal (Pa), and its dimensional formula is
[ML⁻¹T⁻²].
Stress depends on the area over which the force is applied.
प्रति इकाई क्षेत्रफल प्रत्यानयन बल को प्रतिबल कहा जाता है। यदि F अनुप्रस्थ काट पर लंबवत
लगाया गया बल है और A क्षेत्रफल है, तो प्रतिबल का परिमाण = F/A।
प्रतिबल की SI इकाई Nm⁻² या पास्कल (Pa) है, और इसका विमीय सूत्र
[ML⁻¹T⁻²] है।
प्रतिबल उस क्षेत्रफल पर निर्भर करता है जिस पर बल लगाया जाता है।
RRB Group D 26/09/2018 (Afternoon)
901
The product of mass and velocity is _______.
द्रव्यमान और वेग का गुणनफल _______ कहलाता है।
✅ Correct Answer: (B)
The momentum of an object is the product of its mass and velocity and has the same direction
as its velocity.
Its SI unit is kg m s⁻¹. It is a vector quantity. Formula: p = mv.
All objects have mass, so any moving object has momentum.
किसी वस्तु का संवेग उसके द्रव्यमान और वेग का गुणनफल है और इसकी दिशा वेग की दिशा के समान होती
है।
इसकी SI इकाई kg m s⁻¹ है। यह एक सदिश राशि है। सूत्र: p = mv।
सभी वस्तुओं में द्रव्यमान होता है, इसलिए यदि कोई वस्तु गतिमान है तो उसमें संवेग होता है।
RRB Group D 26/09/2018 (Evening)
902
An object having the capability to do work is said to possess:
जिस वस्तु में कार्य करने की क्षमता होती है, उसे कहा जाता है कि उसमें है:
✅ Correct Answer: (D)
Energy is a conserved quantity that has different forms, classified based on potential and
kinetic energy. P.E = mgh, K.E = mv²/2.
The SI unit of energy is joule.
An object that has the capability to do work is said to possess energy.
ऊर्जा एक संरक्षित राशि है जिसके विभिन्न रूप होते हैं, इसे स्थितिज और गतिज ऊर्जा के आधार पर
वर्गीकृत किया जाता है। P.E = mgh, K.E = mv²/2।
ऊर्जा की SI इकाई जूल है।
जिस वस्तु में कार्य करने की क्षमता होती है, कहा जाता है कि उसमें ऊर्जा है।
RRB Group D 27/09/2018 (Morning)
903
The Second Equation of Motion gives the relationship between _____ and Time.
गति का दूसरा समीकरण _____ और समय के बीच संबंध देता है।
✅ Correct Answer: (B)
The second equation of motion: s = ut + (1/2)at², where s = distance travelled
(position), u = initial velocity, t = time, a = acceleration.
This gives the position-time relation.
Acceleration is the rate of change of velocity (a = (v - u)/t); momentum is mass × velocity;
velocity is displacement per unit time.
गति का दूसरा समीकरण: s = ut + (1/2)at², जहां s = तय की गई दूरी (स्थिति), u = प्रारंभिक
वेग, t = समय, a = त्वरण।
यह स्थिति-समय संबंध देता है।
त्वरण वेग में परिवर्तन की दर है (a = (v - u)/t); संवेग द्रव्यमान × वेग है; वेग प्रति इकाई
समय विस्थापन है।
RRB Group D 28/09/2018 (Morning)
904
When two equal forces are acting on a body and opposite in direction, the net force
acting on the body becomes __________.
जब किसी पिंड पर दो समान बल विपरीत दिशाओं में कार्य करते हैं, तो पिंड पर लगने वाला
परिणामी बल __________ हो जाता है।
✅ Correct Answer: (C)
When two forces of equal magnitude act in opposite directions, they cancel each other out.
One force tries to move the body in one direction, while the other tries to move it in the
opposite direction, so the net (resultant) force = F - F = 0.
Force can be defined as the pull or push applied on an object.
जब समान परिमाण के दो बल विपरीत दिशाओं में कार्य करते हैं, तो वे एक-दूसरे को निरस्त कर देते
हैं।
एक बल पिंड को एक दिशा में गति देने का प्रयास करता है, जबकि दूसरा उसे विपरीत दिशा में ले जाने
का प्रयास करता है, इसलिए परिणामी बल = F - F = 0।
बल को किसी वस्तु पर लगाए गए खिंचाव या धक्के के रूप में परिभाषित किया जा सकता है।
RRB Group D 28/09/2018 (Afternoon)
905
Retardation is______.
मंदन (Retardation) ______ है।
✅ Correct Answer: (D)
Positive acceleration occurs when a body's velocity increases.
Similarly, as velocity decreases, the acceleration becomes negative, which is called
retardation.
Retardation (or deceleration) means the object is slowing down.
धनात्मक त्वरण तब होता है जब किसी पिंड का वेग बढ़ता है।
इसी प्रकार, जैसे-जैसे वेग घटता है, त्वरण ऋणात्मक हो जाता है, जिसे मंदन कहा जाता है।
मंदन (या अवमंदन) का अर्थ है कि वस्तु धीमी हो रही है।
RRB Group D 01/10/2018 (Morning)
906
According to which of the following principles does a rocket work in space?
अंतरिक्ष में रॉकेट निम्नलिखित में से किस सिद्धांत के आधार पर कार्य करता है?
✅ Correct Answer: (A)
The principle of conservation of momentum states that the total momentum of a closed system
remains constant unless acted upon by an external force.
A rocket expels exhaust gases backward at high speed, and by conservation of momentum, the
rocket moves forward with an equal and opposite momentum.
The principle of energy conservation states that energy can neither be created nor
destroyed, only transformed.
संवेग संरक्षण का सिद्धांत कहता है कि किसी बंद तंत्र का कुल संवेग स्थिर रहता है जब तक उस पर
कोई बाह्य बल न लगे।
रॉकेट उच्च गति से निकास गैसों को पीछे की ओर छोड़ता है, और संवेग संरक्षण के अनुसार, रॉकेट
बराबर और विपरीत संवेग के साथ आगे बढ़ता है।
ऊर्जा संरक्षण का सिद्धांत कहता है कि ऊर्जा न तो उत्पन्न की जा सकती है और न ही नष्ट, केवल
रूपांतरित की जा सकती है।
RRB Group D 01/10/2018 (Afternoon)
907
When an object is moving with uniform speed, what will be its acceleration?
जब कोई वस्तु एकसमान चाल से गति करती है, तो उसका त्वरण क्या होगा?
✅ Correct Answer: (C)
Acceleration is defined as the rate of change of velocity. Velocity has two components:
speed and direction.
Uniform speed implies the magnitude of velocity (speed) remains constant, so the rate of
change of velocity is zero.
Hence, acceleration is zero.
त्वरण को वेग में परिवर्तन की दर के रूप में परिभाषित किया जाता है। वेग के दो घटक होते हैं:
चाल और दिशा।
एकसमान चाल का अर्थ है कि वेग का परिमाण (चाल) स्थिर रहता है, इसलिए वेग में परिवर्तन की दर
शून्य होती है।
इसलिए, त्वरण शून्य होता है।
RRB Group D 01/10/2018 (Afternoon)
908
Which one of the following is the equation for Position-Time relation?
निम्नलिखित में से कौन सा समीकरण स्थिति-समय संबंध के लिए है?
✅ Correct Answer: (A)
The equations of motion relate velocity, distance, time and acceleration; they are valid
only when acceleration is constant and motion is along a straight line.
V = u + at (velocity-time relation). V² = u² + 2as (position-velocity relation). S
= ut + (1/2)at² (position-time relation).
Where V = final velocity, u = initial velocity, s = distance travelled, a = acceleration, t
= time taken.
गति के समीकरण वेग, दूरी, समय और त्वरण के बीच संबंध दर्शाते हैं; ये तभी मान्य हैं जब त्वरण
स्थिर हो और गति सीधी रेखा में हो।
V = u + at (वेग-समय संबंध)। V² = u² + 2as (स्थिति-वेग संबंध)। S = ut +
(1/2)at² (स्थिति-समय संबंध)।
जहां V = अंतिम वेग, u = प्रारंभिक वेग, s = तय की गई दूरी, a = त्वरण, t = लिया गया समय।
RRB Group D 01/10/2018 (Evening)
909
An object moves at a constant speed when there is no _______ acting on it.
कोई वस्तु स्थिर चाल से तब गति करती है जब उस पर कोई _______ कार्य नहीं कर रहा हो।
✅ Correct Answer: (C)
Newton's first law of motion states that an object at rest remains at rest, and an object in
motion remains in motion at constant speed in a straight line, unless acted upon by a net
force.
Impulse is the change in momentum; inertia is the property of an object to resist changes in
its motion.
Pressure is a force applied over a specific area.
न्यूटन का पहला नियम कहता है कि विराम अवस्था में वस्तु विराम में रहती है, और गतिमान वस्तु
स्थिर चाल से सीधी रेखा में गतिमान रहती है, जब तक उस पर कोई परिणामी बल न लगे।
आवेग संवेग में परिवर्तन है; जड़त्व किसी वस्तु की अपनी गति में परिवर्तन का विरोध करने की
गुणधर्म है।
दाब एक विशिष्ट क्षेत्रफल पर लगाया गया बल है।
RRB Group D 04/10/2018 (Morning)
910
The momentum of an object depends on _____________.
किसी वस्तु का संवेग _____________ पर निर्भर करता है।
✅ Correct Answer: (C)
Momentum is a vector quantity; its formula is p = mv.
The momentum of an object is directly proportional to both its mass and velocity.
The SI unit of momentum is kilogram-metre per second (kg ms⁻¹).
संवेग एक सदिश राशि है; इसका सूत्र p = mv है।
किसी वस्तु का संवेग उसके द्रव्यमान और वेग दोनों के सीधे समानुपाती होता है।
संवेग की SI इकाई किलोग्राम-मीटर प्रति सेकंड (kg ms⁻¹) है।
RRB Group D 04/10/2018 (Afternoon)
911
When an object floats, the upthrust of the liquid on the object is ______.
जब कोई वस्तु तैरती है, तो वस्तु पर तरल का उत्थ्रस्ट (upthrust) ______ होता है।
✅ Correct Answer: (B)
Thrust is the force acting perpendicular to the surface of an object; Thrust = Pressure ×
Area. The thrust of a liquid on an object is called buoyancy.
When an object floats, it is in equilibrium — the upward buoyant force (upthrust) exactly
equals the downward weight of the object.
This is consistent with Archimedes' principle.
प्रणोद (thrust) किसी वस्तु की सतह के लंबवत कार्य करने वाला बल है; प्रणोद = दाब × क्षेत्रफल।
किसी वस्तु पर तरल के प्रणोद को उत्प्लावन (buoyancy) कहते हैं।
जब कोई वस्तु तैरती है, तो वह साम्यावस्था में होती है — ऊपर की ओर उत्प्लावन बल (उत्थ्रस्ट)
वस्तु के नीचे की ओर भार के बिल्कुल बराबर होता है।
यह आर्किमिडीज सिद्धांत के अनुरूप है।
RRB Group D 05/10/2018 (Morning)
912
The property of a substance not changing its shape even after _________ work is done
on it is called _______.
किसी पदार्थ पर _________ कार्य किए जाने के बाद भी उसका आकार न बदलने का गुण _______
कहलाता है।
✅ Correct Answer: (C)
The property of a substance to maintain its shape even when an external force is applied is
known as rigidity, described here as perseverance in the context of inertia.
The constants representing this property are called moments of inertia.
Objects with high moments of inertia — spheres, disks, cylinders, wheels. Objects with low
moments of inertia — rods, needles, sheets, plates.
किसी पदार्थ का बाह्य बल लगाए जाने पर भी अपना आकार बनाए रखने का गुण दृढ़ता (rigidity) कहलाता
है, जिसे यहां जड़त्व के संदर्भ में दृढ़ता के रूप में वर्णित किया गया है।
इस गुण को दर्शाने वाले नियतांकों को जड़त्व आघूर्ण (moments of inertia) कहा जाता है।
उच्च जड़त्व आघूर्ण वाली वस्तुएं — गोले, डिस्क, बेलन, पहिये। निम्न जड़त्व आघूर्ण वाली वस्तुएं
— छड़ें, सुइयां, चादरें, प्लेटें।
RRB Group D 05/10/2018 (Morning)
913
What would you call air pressure?
वायु के दाब को क्या कहा जाता है?
✅ Correct Answer: (C)
Atmospheric pressure is the force exerted by the weight of Earth's atmosphere on everything
at its surface, affecting the air we breathe, ocean water, and structures.
Evaporation is the process of a liquid changing into a gas — not related to the pressure of
air itself.
वायुमंडलीय दाब वह बल है जो पृथ्वी के वायुमंडल के भार द्वारा उसकी सतह पर सभी वस्तुओं पर लगाया
जाता है, जो हमारे द्वारा सांस ली जाने वाली हवा, महासागर के जल और संरचनाओं को प्रभावित करता
है।
वाष्पीकरण किसी तरल के गैस में बदलने की प्रक्रिया है — यह वायु के दाब से संबंधित नहीं है।
RRB Group D 05/10/2018 (Afternoon)
914
When the barometric readings suddenly decrease, it indicates that the weather
_________.
जब बैरोमीटर की रीडिंग अचानक घटती है, तो यह संकेत देता है कि मौसम _________।
✅ Correct Answer: (D)
A barometer is a scientific instrument used to measure air pressure in a certain
environment.
When the barometer drops quickly, it suggests a thunderstorm is imminent.
If it doesn't rise after the storm ends, the weather may stay unstable for days.
बैरोमीटर एक वैज्ञानिक उपकरण है जिसका उपयोग किसी वातावरण में वायु दाब मापने के लिए किया जाता
है।
जब बैरोमीटर तेजी से गिरता है, तो यह संकेत देता है कि तूफान आने वाला है।
यदि तूफान समाप्त होने के बाद भी यह नहीं बढ़ता, तो मौसम कई दिनों तक अस्थिर रह सकता है।
RRB Group D 05/10/2018 (Afternoon)
915
___________ is called work.
___________ को कार्य कहा जाता है।
✅ Correct Answer: (A)
Work is defined as the dot product of the applied force and the displacement caused by the
application of that force. W = F·d·cosθ.
It can be positive, negative, or even zero depending on the value of angle θ.
Mass × acceleration = Force (Newton's second law). Length × width = Area. Mass × volume is
not a standard physical quantity.
कार्य को लगाए गए बल और उसके कारण होने वाले विस्थापन के अदिश गुणनफल के रूप में परिभाषित किया
जाता है। W = F·d·cosθ।
यह कोण θ के मान के आधार पर धनात्मक, ऋणात्मक या शून्य हो सकता है।
द्रव्यमान × त्वरण = बल (न्यूटन का दूसरा नियम)। लंबाई × चौड़ाई = क्षेत्रफल। द्रव्यमान × आयतन
एक मानक भौतिक राशि नहीं है।
RRB Group D 08/10/2018 (Morning)
916
If an angle is formed between force and displacement then the work done will be
negative when the angle is:
यदि बल और विस्थापन के बीच कोई कोण बनता है, तो किया गया कार्य ऋणात्मक होगा जब कोण
होगा:
✅ Correct Answer: (A)
Work Done = Fs cosθ, and cos 180° = -1. When the angle between force and displacement
is 180°, the work done is negative.
In this case, the force and displacement are in opposite directions.
Example — the force of gravity acts downward but the displacement of the body is upward, so
the work done by gravity is negative.
किया गया कार्य = Fs cosθ, और cos 180° = -1। जब बल और विस्थापन के बीच का कोण 180° होता
है, तो किया गया कार्य ऋणात्मक होता है।
इस स्थिति में, बल और विस्थापन विपरीत दिशाओं में होते हैं।
उदाहरण — गुरुत्व बल नीचे की ओर कार्य करता है लेकिन पिंड का विस्थापन ऊपर की ओर होता है, इसलिए
गुरुत्व द्वारा किया गया कार्य ऋणात्मक होता है।
RRB Group D 09/10/2018 (Morning)
917
Average speed and average velocity explain the motion of a body:
औसत चाल और औसत वेग किसी पिंड की गति को किस प्रकार समझाते हैं:
✅ Correct Answer: (B)
Average speed of a body in a certain time interval is the distance covered in that interval
divided by time: v_av = s/(t2 - t1).
Average velocity of a body in a certain time interval is the displacement in that interval
divided by time.
Both describe motion over a given time interval, not at a single instant.
किसी निश्चित समय अंतराल में किसी पिंड की औसत चाल उस अंतराल में तय की गई दूरी को समय से
विभाजित करने पर प्राप्त होती है: v_av = s/(t2 - t1)।
किसी निश्चित समय अंतराल में किसी पिंड का औसत वेग उस अंतराल में विस्थापन को समय से विभाजित
करने पर प्राप्त होता है।
दोनों किसी दिए गए समय अंतराल के दौरान गति का वर्णन करते हैं, न कि किसी एक क्षण पर।
RRB Group D 09/10/2018 (Morning)
918
For any applied force, if the area is less then the pressure will be:
किसी भी लगाए गए बल के लिए, यदि क्षेत्रफल कम है तो दाब होगा:
✅ Correct Answer: (C)
Pressure is inversely proportional to area (P = F/A). If the area is less, the pressure will
be more.
Pressure — SI unit is Pascal, formula P = Force/Area.
Example — porters place a round cloth on their heads to increase surface area and reduce
pressure.
दाब क्षेत्रफल के व्युत्क्रमानुपाती होता है (P = F/A)। यदि क्षेत्रफल कम है, तो दाब अधिक होगा।
दाब — SI इकाई पास्कल है, सूत्र P = बल/क्षेत्रफल।
उदाहरण — कुली अपने सिर पर गोल कपड़ा रखते हैं ताकि सतह क्षेत्रफल बढ़े और दाब कम हो।
RRB Group D 10/10/2018 (Morning)
919
What is the scientific term for the speed of an object moving in a definite
direction?
किसी निश्चित दिशा में गतिमान वस्तु की चाल के लिए वैज्ञानिक शब्द क्या है?
✅ Correct Answer: (C)
Velocity — a vector quantity, formula displacement/time, SI unit m/s, dimensional formula
[M⁰L¹T⁻¹].
Speed describes only the magnitude of motion, while velocity describes both speed and
direction.
Acceleration is the rate of change of velocity (SI unit m/s²); motion is a change in
position of an object over time.
वेग — एक सदिश राशि, सूत्र विस्थापन/समय, SI इकाई m/s, विमीय सूत्र
[M⁰L¹T⁻¹]।
चाल केवल गति के परिमाण को दर्शाती है, जबकि वेग चाल और दिशा दोनों को दर्शाता है।
त्वरण वेग में परिवर्तन की दर है (SI इकाई m/s²); गति समय के साथ किसी वस्तु की स्थिति में
परिवर्तन है।
RRB Group D 11/10/2018 (Morning)
920
What is the measurement of the mass of an object called?
किसी वस्तु के द्रव्यमान के माप को क्या कहा जाता है?
✅ Correct Answer: (B)
Inertia refers to the resistance of any physical object to changes in its state of motion,
describing how motion is affected by applied forces.
The mass of an object is a measure of its inertia — the greater the mass, the greater the
inertia.
Acceleration measures rate of change of velocity; impulse is the change in momentum; speed
is the rate of change of distance.
जड़त्व किसी भौतिक वस्तु का उसकी गति की अवस्था में परिवर्तन के प्रति प्रतिरोध है, जो यह
दर्शाता है कि गति लगाए गए बलों से कैसे प्रभावित होती है।
किसी वस्तु का द्रव्यमान उसके जड़त्व का माप है — द्रव्यमान जितना अधिक होगा, जड़त्व उतना ही
अधिक होगा।
त्वरण वेग में परिवर्तन की दर मापता है; आवेग संवेग में परिवर्तन है; चाल दूरी में परिवर्तन की
दर है।
RRB Group D 11/10/2018 (Afternoon)
921
What is called thrust per unit area?
प्रति इकाई क्षेत्रफल प्रणोद (thrust) को क्या कहा जाता है?
✅ Correct Answer: (C)
Pressure is a measure of the force applied perpendicular to the surface of an object per
unit area, expressed as P = F/A.
Thrust is the force acting perpendicular to the surface of an object.
Therefore, pressure = thrust per unit area. The SI unit for pressure is the Pascal (Pa),
where 1 Pa = 1 N/m².
दाब किसी वस्तु की सतह के लंबवत प्रति इकाई क्षेत्रफल लगाए गए बल का माप है, जिसे P = F/A के
रूप में व्यक्त किया जाता है।
प्रणोद (thrust) किसी वस्तु की सतह के लंबवत कार्य करने वाला बल है।
इसलिए, दाब = प्रति इकाई क्षेत्रफल प्रणोद। दाब की SI इकाई पास्कल (Pa) है, जहां 1 Pa = 1
N/m²।
RRB Group D 11/10/2018 (Evening)
922
Which of the following statements is/are true? A. If we decrease temperature and
increase pressure, we can liquefy atmospheric gases. B. A hot dry day means the temperature of the
atmosphere is high and humidity of air is low. Both these factors increase the rate of evaporation and
thus enormous cooling is produced.
निम्नलिखित में से कौन सा/से कथन सत्य है/हैं? A. यदि हम तापमान घटाएं और दाब बढ़ाएं,
तो हम वायुमंडलीय गैसों को द्रवित कर सकते हैं। B. गर्म शुष्क दिन का अर्थ है कि वायुमंडल का तापमान उच्च
और वायु की आर्द्रता कम है। ये दोनों कारक वाष्पीकरण की दर बढ़ाते हैं और इस प्रकार अत्यधिक शीतलन उत्पन्न
होता है।
✅ Correct Answer: (D)
Statement A is true — decreasing temperature reduces the kinetic energy of gas molecules,
and increasing pressure increases intermolecular forces; together these help liquefy
atmospheric gases.
Statement B is true — on a hot dry day, air molecules have higher kinetic energy (due to
high temperature) and low humidity means less water vapour is present, both increasing the
rate of evaporation and producing cooling.
कथन A सत्य है — तापमान घटाने से गैस अणुओं की गतिज ऊर्जा कम होती है, और दाब बढ़ाने से
अंतराआण्विक बल बढ़ते हैं; दोनों मिलकर वायुमंडलीय गैसों को द्रवित करने में मदद करते हैं।
कथन B सत्य है — गर्म शुष्क दिन में, वायु अणुओं में उच्च गतिज ऊर्जा (उच्च तापमान के कारण)
होती है और कम आर्द्रता का अर्थ है कम जलवाष्प की उपस्थिति, दोनों वाष्पीकरण की दर बढ़ाकर शीतलन
उत्पन्न करते हैं।
RRB Group D 12/10/2018 (Evening)
923
Which of the following equations represents the velocity-time relation?
निम्नलिखित में से कौन सा समीकरण वेग-समय संबंध को दर्शाता है?
✅ Correct Answer: (D)
v = u + at represents the first equation of motion, relating final velocity (v), initial
velocity (u), acceleration (a), and time (t) — the velocity-time relation.
s = ut + (1/2)at² represents the position-time relation; 2as = v² - u²
represents the position-velocity relation.
v = u - at is not a standard equation of motion; deceleration is usually represented with a
negative value of a in v = u + at.
v = u + at गति के पहले समीकरण को दर्शाता है, जो अंतिम वेग (v), प्रारंभिक वेग (u), त्वरण (a),
और समय (t) से संबंधित है — यह वेग-समय संबंध है।
s = ut + (1/2)at² स्थिति-समय संबंध को दर्शाता है; 2as = v² - u² स्थिति-वेग
संबंध को दर्शाता है।
v = u - at गति का मानक समीकरण नहीं है; मंदन को सामान्यतः v = u + at में a के ऋणात्मक मान
द्वारा दर्शाया जाता है।
RRB Group D 12/10/2018 (Evening)
924
If an object of mass m is raised to a height h from the ground, then force is
required for this action. The minimum force required to lift an object is equal to _________.
यदि द्रव्यमान m की कोई वस्तु जमीन से ऊंचाई h तक उठाई जाती है, तो इस क्रिया के लिए बल
की आवश्यकता होती है। किसी वस्तु को उठाने के लिए आवश्यक न्यूनतम बल _________ के बराबर होता है।
✅ Correct Answer: (B)
This follows from Newton's second law of motion, which states that force (F) equals mass (m)
times acceleration (a).
When lifting an object vertically, the acceleration due to gravity (g) acts downward,
opposing the motion.
Therefore, the minimum net force required to lift the object at constant velocity (zero
acceleration) equals its weight — the product of mass (m) and acceleration due to gravity
(g). W = mg.
यह न्यूटन के दूसरे नियम से निकलता है, जो कहता है कि बल (F) द्रव्यमान (m) और त्वरण (a) के
गुणनफल के बराबर है।
जब किसी वस्तु को लंबवत ऊपर उठाया जाता है, तो गुरुत्वीय त्वरण (g) नीचे की ओर कार्य करता है,
गति का विरोध करते हुए।
इसलिए, वस्तु को स्थिर वेग (शून्य त्वरण) पर उठाने के लिए आवश्यक न्यूनतम परिणामी बल उसके भार
के बराबर होता है — द्रव्यमान (m) और गुरुत्वीय त्वरण (g) का गुणनफल। W = mg।
RRB Group D 15/10/2018 (Evening)
925
What is a force acting perpendicular to a plane called?
किसी तल के लंबवत कार्य करने वाले बल को क्या कहा जाता है?
✅ Correct Answer: (A)
The force acting on a body perpendicular to its surface is called thrust.
Pressure is defined as the thrust acting over a unit area of the surface (P = Thrust/Area).
Torque is the rotational equivalent of force; stretch refers to elongation of a material.
किसी पिंड की सतह के लंबवत कार्य करने वाले बल को प्रणोद (thrust) कहा जाता है।
दाब को सतह के इकाई क्षेत्रफल पर कार्य करने वाले प्रणोद के रूप में परिभाषित किया जाता है (P =
प्रणोद/क्षेत्रफल)।
बलआघूर्ण (torque) बल का घूर्णी समतुल्य है; खिंचाव किसी सामग्री के लंबा होने को दर्शाता है।
RRB Group D 15/10/2018 (Evening)
926
In which of the following is the value of inertia maximum?
निम्नलिखित में से किसमें जड़त्व का मान अधिकतम है?
✅ Correct Answer: (D)
The moment of inertia of a rigid body depends on its mass, shape and size, distribution of
mass about the axis of rotation, and the position and orientation of the axis.
Dimensions of moment of inertia are [ML²], SI unit kg m².
Among the given options, trains and airplanes have the greatest mass, and hence the greatest
inertia — a train especially, being very heavy, has extremely high inertia.
किसी दृढ़ पिंड का जड़त्व आघूर्ण उसके द्रव्यमान, आकार व आकृति, घूर्णन अक्ष के सापेक्ष
द्रव्यमान के वितरण, और अक्ष की स्थिति व दिशा पर निर्भर करता है।
जड़त्व आघूर्ण का विमीय सूत्र [ML²] है, SI इकाई kg m² है।
दिए गए विकल्पों में, ट्रेन और हवाई जहाज का द्रव्यमान सबसे अधिक है, इसलिए उनका जड़त्व भी सबसे
अधिक है — विशेष रूप से ट्रेन बहुत भारी होने के कारण अत्यधिक उच्च जड़त्व रखती है।
RRB Group D 16/10/2018 (Morning)
927
If an object is pulled by holding it from both ends, then the force applied on it is
called _________.
यदि किसी वस्तु को दोनों सिरों से पकड़कर खींचा जाए, तो उस पर लगाया गया बल _________
कहलाता है।
✅ Correct Answer: (D)
Tension refers to the force transmitted when a rope, wire, cable, or string is tethered by
forces acting on opposite ends.
When an object is pulled from both ends, each end experiences a pulling force — this is
tension.
Formula: T = mg, where T is tension, m is mass (kg), and g is acceleration due to gravity
(9.8 m/sec²).
तनाव (tension) वह बल है जो किसी रस्सी, तार, केबल या डोरी के विपरीत सिरों पर लगाए गए बलों
द्वारा संचारित होता है।
जब किसी वस्तु को दोनों सिरों से खींचा जाता है, तो प्रत्येक सिरे पर खींचने वाला बल लगता है —
यही तनाव है।
सूत्र: T = mg, जहां T तनाव है, m द्रव्यमान (kg) है, और g गुरुत्वीय त्वरण (9.8 m/sec²)
है।
RRB Group D 16/10/2018 (Morning)
928
An object moves with a constant speed when the value of _______ is negligible.
कोई वस्तु स्थिर चाल से गति करती है जब _______ का मान नगण्य होता है।
✅ Correct Answer: (C)
According to Newton's first law of motion, an object remains at rest or moves in a straight
line with constant speed if the net force acting on it is zero.
When the value of force is negligible, the net force acting on the object is close to zero.
Therefore, the object continues to move at constant speed.
न्यूटन के पहले नियम के अनुसार, यदि किसी वस्तु पर लगने वाला परिणामी बल शून्य हो, तो वह विराम
में रहती है या सीधी रेखा में स्थिर चाल से गति करती है।
जब बल का मान नगण्य होता है, तो वस्तु पर लगने वाला परिणामी बल लगभग शून्य के बराबर होता है।
इसलिए, वस्तु स्थिर चाल से गति करती रहती है।
RRB Group D 16/10/2018 (Morning)
929
Which of the following statements is incorrect? (i) Separate force does not
exist. (ii) Forces are in pairs. (iii) Action and reaction forces act on different bodies. (iv)
Action and reaction forces act on the same body.
निम्नलिखित में से कौन सा कथन गलत है? (i) पृथक बल का अस्तित्व नहीं होता। (ii) बल
जोड़े में होते हैं। (iii) क्रिया और प्रतिक्रिया बल अलग-अलग पिंडों पर कार्य करते हैं। (iv) क्रिया
और प्रतिक्रिया बल एक ही पिंड पर कार्य करते हैं।
✅ Correct Answer: (D)
Newton's Third Law of Motion states that for every action force, there is an equal and
opposite reaction force.
These forces always act on different bodies, never on the same body.
For example, when you kick a ball (action), the ball exerts an equal and opposite force back
on your foot (reaction) — these act on different objects. Hence statement (iv) is incorrect.
न्यूटन का तीसरा नियम कहता है कि प्रत्येक क्रिया बल के लिए एक बराबर और विपरीत प्रतिक्रिया बल
होता है।
ये बल हमेशा अलग-अलग पिंडों पर कार्य करते हैं, कभी भी एक ही पिंड पर नहीं।
उदाहरण के लिए, जब आप गेंद को किक मारते हैं (क्रिया), तो गेंद आपके पैर पर बराबर और विपरीत बल
लगाती है (प्रतिक्रिया) — ये अलग-अलग वस्तुओं पर कार्य करते हैं। इसलिए कथन (iv) गलत है।
RRB Group D 16/10/2018 (Afternoon)
930
The distance covered by an object in unit time is called _______.
किसी वस्तु द्वारा इकाई समय में तय की गई दूरी को _______ कहा जाता है।
✅ Correct Answer: (D)
Average speed is the total distance covered divided by total time taken; it is a scalar
quantity.
Distance is the total length of the path travelled, without considering direction (scalar
quantity, only magnitude).
Average velocity is displacement divided by total time, considering direction; displacement
is the shortest distance between initial and final positions.
औसत चाल कुल तय की गई दूरी को कुल समय से विभाजित करने पर प्राप्त होती है; यह एक अदिश राशि है।
दूरी तय किए गए पथ की कुल लंबाई है, दिशा पर विचार किए बिना (अदिश राशि, केवल परिमाण)।
औसत वेग विस्थापन को कुल समय से विभाजित करने पर प्राप्त होता है, दिशा को ध्यान में रखते हुए;
विस्थापन प्रारंभिक और अंतिम स्थिति के बीच की सबसे छोटी दूरी है।
RRB Group D 16/10/2018 (Afternoon)
931
Motion of a body with constant speed in a circular path is called:
वृत्ताकार पथ में स्थिर चाल से पिंड की गति क्या कहलाती है?
✅ Correct Answer: (A)
Uniform circular motion describes the motion of a body with constant speed in a circular
path; although speed is constant, velocity changes continuously due to changing direction,
causing centripetal acceleration towards the centre.
Non-uniform circular motion — the body's speed changes as it moves along the circular path.
Circulatory motion is a broader term covering both uniform and non-uniform circular motion;
oscillatory motion is back-and-forth motion about a mean position.
एकसमान वृत्तीय गति किसी पिंड की वृत्ताकार पथ में स्थिर चाल से गति को दर्शाती है; चाल स्थिर
होने के बावजूद, दिशा बदलने के कारण वेग निरंतर बदलता रहता है, जिससे केंद्र की ओर अभिकेंद्री
त्वरण उत्पन्न होता है।
असमान वृत्तीय गति — जब पिंड की चाल वृत्ताकार पथ पर चलते समय बदलती रहती है।
परिसंचरण गति एक व्यापक शब्द है जो एकसमान और असमान दोनों प्रकार की वृत्तीय गति को शामिल करता
है; दोलन गति किसी माध्य स्थिति के चारों ओर आगे-पीछे की गति है।
RRB Group D 16/10/2018 (Evening)
932
The forces between two bodies are always:
दो पिंडों के बीच बल हमेशा होते हैं:
✅ Correct Answer: (B)
Newton's Third Law of Motion states that for every action, there is an equal and opposite
reaction.
Whenever one object exerts a force on another, the second object exerts a force back on the
first that is equal in strength but opposite in direction.
The forces between two bodies are always equal in magnitude and opposite in direction.
न्यूटन का तीसरा नियम कहता है कि प्रत्येक क्रिया के बराबर और विपरीत प्रतिक्रिया होती है।
जब भी एक वस्तु दूसरी वस्तु पर बल लगाती है, तो दूसरी वस्तु पहली वस्तु पर बराबर परिमाण लेकिन
विपरीत दिशा में बल लगाती है।
दो पिंडों के बीच बल हमेशा परिमाण में समान और दिशा में विपरीत होते हैं।
RRB Group D 16/10/2018 (Evening)
933
A graph showing velocity of an object with time is known as:
समय के साथ किसी वस्तु के वेग को दर्शाने वाला ग्राफ क्या कहलाता है?
✅ Correct Answer: (C)
A velocity-time graph shows the velocity of an object with respect to time.
The slope of a velocity-time graph represents the acceleration of the object.
The area under a velocity-time graph represents the displacement of the object; useful in
studying uniformly accelerated motion.
वेग-समय ग्राफ किसी वस्तु के वेग को समय के सापेक्ष दर्शाता है।
वेग-समय ग्राफ का ढलान वस्तु के त्वरण को दर्शाता है।
वेग-समय ग्राफ के नीचे का क्षेत्रफल वस्तु के विस्थापन को दर्शाता है; यह समान रूप से त्वरित
गति के अध्ययन में उपयोगी है।
RRB Group D 22/10/2018 (Morning)
934
Which of the following equations establishes the relationship between position and
velocity?
निम्नलिखित में से कौन सा समीकरण स्थिति और वेग के बीच संबंध स्थापित करता है?
✅ Correct Answer: (B)
2as = v² - u² relates displacement (s), final velocity (v), initial velocity (u),
and acceleration (a) — establishing the position-velocity relation.
v = u + at gives the velocity-time relation (first equation); s = ut + (1/2)at² gives
the position-time relation (second equation).
Related formulas — Charge (Q) = I·t. Voltage (V) = IR. Kinetic Energy = (1/2)mv².
Potential Energy = mgh. Power = VI = I²R = V²/R.
2as = v² - u² विस्थापन (s), अंतिम वेग (v), प्रारंभिक वेग (u), और त्वरण (a) को
जोड़ता है — यह स्थिति-वेग संबंध स्थापित करता है।
v = u + at वेग-समय संबंध देता है (पहला समीकरण); s = ut + (1/2)at² स्थिति-समय संबंध देता
है (दूसरा समीकरण)।
संबंधित सूत्र — आवेश (Q) = I·t। वोल्टेज (V) = IR। गतिज ऊर्जा = (1/2)mv²। स्थितिज ऊर्जा
= mgh। शक्ति = VI = I²R = V²/R।
RRB Group D 23/10/2018 (Evening)
935
The motion of a bus on a crowded road is an example of _____ motion.
भीड़भाड़ वाली सड़क पर बस की गति _____ गति का उदाहरण है।
✅ Correct Answer: (A)
Non-uniform motion is when an object moves at different speeds in equal time intervals,
covering different distances.
A bus on a crowded road stops and goes, slows down and speeds up frequently — this is
non-uniform motion, similar to a bike traveling in traffic.
Uniform motion covers equal distances in equal time intervals (e.g., airplanes flying at
constant speed). Circular motion example — Moon orbiting Earth; linear motion example — a
train on straight tracks.
असमान गति वह है जिसमें कोई वस्तु समान समय अंतराल में भिन्न-भिन्न चाल से चलती है, भिन्न-भिन्न
दूरियां तय करते हुए।
भीड़भाड़ वाली सड़क पर बस को बार-बार रुकना और चलना पड़ता है, धीमा और तेज होना पड़ता है — यह
असमान गति है, जैसे ट्रैफिक में चलती बाइक।
एकसमान गति समान समय अंतराल में समान दूरी तय करती है (जैसे हवाई जहाज का स्थिर चाल से उड़ना)।
वृत्तीय गति उदाहरण — चंद्रमा का पृथ्वी की परिक्रमा करना; रेखीय गति उदाहरण — सीधी पटरियों पर
ट्रेन।
RRB Group D 24/10/2018 (Morning)
936
What is the definition of mass?
द्रव्यमान की परिभाषा क्या है?
✅ Correct Answer: (D)
Mass is the measure of the quantity of matter in an object. The SI unit of mass is the
kilogram (kg).
The mass of an object is constant and does not change from place to place, unlike weight,
which varies with the gravitational field.
Mass is a scalar quantity and can be measured using a chemical (beam) balance by comparing
it with known standard masses.
द्रव्यमान किसी वस्तु में पदार्थ की मात्रा का माप है। द्रव्यमान की SI इकाई किलोग्राम (kg) है।
किसी वस्तु का द्रव्यमान स्थिर रहता है और स्थान बदलने से नहीं बदलता, जबकि भार गुरुत्वीय
क्षेत्र के साथ बदलता है।
द्रव्यमान एक अदिश राशि है और इसे रासायनिक (बीम) तुला से ज्ञात मानक द्रव्यमानों से तुलना करके
मापा जा सकता है।
RRB Group D 24/10/2018 (Evening)
937
In negative acceleration, the velocity of a body_________.
ऋणात्मक त्वरण में, किसी पिंड का वेग_________।
✅ Correct Answer: (C)
Negative acceleration, also known as deceleration or retardation, occurs when the speed of
an object decreases over time.
It represents motion's opposing force, where the object is slowing down rather than speeding
up.
Example — when brakes are applied to a moving vehicle, it decelerates and its velocity
decreases until it stops.
ऋणात्मक त्वरण, जिसे मंदन या अवमंदन भी कहा जाता है, तब होता है जब किसी वस्तु की चाल समय के
साथ घटती है।
यह गति के विपरीत बल को दर्शाता है, जहां वस्तु तेज होने के बजाय धीमी हो रही होती है।
उदाहरण — जब किसी गतिमान वाहन में ब्रेक लगाए जाते हैं, तो वह मंद होता है और उसका वेग रुकने तक
घटता जाता है।
RRB Group D 25/10/2018 (Morning)
938
What is the upward force exerted by the water on the bottle containing it called?
जल द्वारा उसमें रखी बोतल पर लगाए गए ऊपर की ओर बल को क्या कहा जाता है?
✅ Correct Answer: (B)
Buoyant force is the upward force exerted by a fluid on an object submerged in it; it is the
force that causes objects to float. Unit — Newton (N).
It depends on the density of the fluid. Formula: Buoyant force (f) = ρgv, where ρ =
density, g = gravity, v = volume.
Tension is the pulling force applied axially by a rope or cable; thrust is a force that
pushes an object in one direction (Newton's third law); pressure is force per unit area
applied perpendicular to a surface.
उत्प्लावन बल किसी तरल द्वारा उसमें डूबी वस्तु पर लगाया गया ऊपर की ओर बल है; यह वह बल है जो
वस्तुओं को तैरने देता है। इकाई — न्यूटन (N)।
यह तरल के घनत्व पर निर्भर करता है। सूत्र: उत्प्लावन बल (f) = ρgv, जहां ρ = घनत्व, g
= गुरुत्व, v = आयतन।
तनाव किसी रस्सी या केबल द्वारा अक्षीय रूप से लगाया गया खींचने वाला बल है; प्रणोद किसी वस्तु
को एक दिशा में धकेलने वाला बल है (न्यूटन का तीसरा नियम); दाब किसी सतह के लंबवत प्रति इकाई
क्षेत्रफल लगाया गया बल है।
RRB Group D 29/10/2018 (Morning)
939
Instantaneous velocity and average velocity are equal when the object _____.
तात्क्षणिक वेग और औसत वेग तब बराबर होते हैं जब वस्तु _____।
✅ Correct Answer: (B)
Average velocity tells us how fast an object has moved over a given time interval, but not
how fast it moves at every instant within that interval.
Instantaneous velocity is the velocity at a particular instant of time.
When the object has zero acceleration, it moves with uniform (constant) velocity, so the
velocity at every instant equals the average velocity.
औसत वेग हमें बताता है कि किसी दिए गए समय अंतराल में कोई वस्तु कितनी तेजी से चली है, परंतु यह
उस अंतराल के प्रत्येक क्षण की गति नहीं बताता।
तात्क्षणिक वेग किसी विशेष क्षण पर वेग होता है।
जब वस्तु का त्वरण शून्य होता है, तो वह एकसमान (स्थिर) वेग से गति करती है, इसलिए हर क्षण का
वेग औसत वेग के बराबर होता है।
RRB Group D 02/11/2018 (Afternoon)
940
Which of the following examples illustrates Newton's first law of motion?
निम्नलिखित में से कौन सा उदाहरण न्यूटन के गति के पहले नियम को दर्शाता है?
✅ Correct Answer: (B)
Newton's First Law (Law of Inertia) — an object at rest remains at rest, or if in motion
remains in motion at constant velocity, unless acted on by a net external force.
When a bus starts suddenly, the passengers' bodies tend to remain at rest (due to inertia)
while the bus moves forward — giving a backward jerk. This is an example of Newton's First
Law.
Newton's Third Law — every action has an equal and opposite reaction (illustrated by rocket
launch).
न्यूटन का पहला नियम (जड़त्व का नियम) — विराम में स्थित वस्तु विराम में रहती है, या गतिमान
वस्तु स्थिर वेग से गतिमान रहती है, जब तक उस पर परिणामी बाह्य बल न लगे।
जब बस अचानक चलती है, तो यात्रियों का शरीर जड़त्व के कारण विराम में रहने की प्रवृत्ति रखता है
जबकि बस आगे बढ़ती है — जिससे पीछे की ओर झटका लगता है। यह न्यूटन के पहले नियम का उदाहरण है।
न्यूटन का तीसरा नियम — प्रत्येक क्रिया की बराबर और विपरीत प्रतिक्रिया होती है (रॉकेट
प्रक्षेपण द्वारा दर्शाया गया)।
RRB Group D 05/11/2018 (Evening)
941
When the angle between the force and the displacement is 90°, the work done is______.
जब बल और विस्थापन के बीच का कोण 90° होता है, तो किया गया कार्य______ होता है।
✅ Correct Answer: (C)
Work done on an object is the magnitude of force multiplied by the distance moved in the
direction of the applied force: W = Fd cosθ.
When θ = 90°, cos 90° = 0, so W = Fd × 0 = 0. Therefore no work is done.
When angle is 180°, work done is negative; when angle is 0°, work done is positive. Unit of
work — Joule.
किसी वस्तु पर किया गया कार्य बल के परिमाण और लगाए गए बल की दिशा में तय की गई दूरी का गुणनफल
है: W = Fd cosθ।
जब θ = 90°, cos 90° = 0, इसलिए W = Fd × 0 = 0। अतः कोई कार्य नहीं होता।
जब कोण 180° होता है, कार्य ऋणात्मक होता है; जब कोण 0° होता है, कार्य धनात्मक होता है। कार्य
की इकाई — जूल।
RRB Group D 05/11/2018 (Evening)
942
If a body, in transformed motion, moves on a curved path, then this motion is called
______.
यदि रूपांतरित गति में कोई पिंड घुमावदार पथ पर चलता है, तो इस गति को ______ कहा जाता
है।
✅ Correct Answer: (D)
Curvilinear motion refers to the motion of a body along a curved path, occurring when the
direction of the body changes continuously as it moves.
Examples — projectile motion (a ball thrown at an angle), motion of planets around the sun,
or a car moving around a bend.
वक्रीय गति किसी पिंड की घुमावदार पथ पर गति को दर्शाती है, जो तब होती है जब पिंड की दिशा गति
करते समय निरंतर बदलती रहती है।
उदाहरण — प्रक्षेप्य गति (कोण पर फेंकी गई गेंद), सूर्य के चारों ओर ग्रहों की गति, या मोड़ पर
चलती कार।
RRB Group D 12/11/2018 (Afternoon)
943
During a motorcycle accident, a helmet is helpful in reducing __________.
मोटरसाइकिल दुर्घटना के दौरान, हेलमेट __________ को कम करने में मददगार होता है।
✅ Correct Answer: (A)
Impulse is the product of force and time (Impulse = Force × Time).
In a motorcycle accident, the impact creates a large force acting on the head for a short
duration. A helmet increases the time of impact by deforming and absorbing energy.
Since Impulse = Force × Time, for the same change in momentum, increasing time reduces the
force experienced by the head.
आवेग बल और समय का गुणनफल है (आवेग = बल × समय)।
मोटरसाइकिल दुर्घटना में, टकराव के दौरान सिर पर कम समय में बड़ा बल लगता है। हेलमेट विरूपित
होकर और ऊर्जा अवशोषित करके टकराव के समय को बढ़ाता है।
चूंकि आवेग = बल × समय है, समान संवेग परिवर्तन के लिए, समय बढ़ने से सिर पर लगने वाला बल कम हो
जाता है।
RRB Group D 15/11/2018 (Evening)
944
An example of stretching is:
खिंचाव (stretching) का एक उदाहरण है:
✅ Correct Answer: (A)
Hoisting the flag, when done with proper form (arms extended, back straight), involves
extending and elongating the muscles in the arms, shoulders, and back — the essence of
stretching.
The rope is also stretched as the flag is pulled upward.
झंडा फहराते समय (सही मुद्रा में, हाथ फैलाकर, पीठ सीधी रखकर) बाजुओं, कंधों और पीठ की
मांसपेशियां खिंचती और लंबी होती हैं — यही खिंचाव है।
झंडे को ऊपर खींचते समय रस्सी भी खिंचती है।
RRB Group D 27/11/2018 (Evening)
945
The speed of a car on a crowded street is an example of________.
भीड़भाड़ वाली सड़क पर कार की चाल________ का उदाहरण है।
✅ Correct Answer: (A)
Non-uniform motion is when an object moves at different speeds.
On a crowded street, a car constantly slows down, stops, and speeds up due to traffic
signals, pedestrians, and other vehicles — so it does not cover equal distances in equal
time intervals.
Other examples — a man running a 100m race, a bouncy ball. Uniform motion covers equal
distances in equal time intervals.
असमान गति वह है जिसमें कोई वस्तु भिन्न-भिन्न चाल से चलती है।
भीड़भाड़ वाली सड़क पर, ट्रैफिक सिग्नल, पैदल यात्रियों और अन्य वाहनों के कारण कार को लगातार
धीमा, रुकना और तेज होना पड़ता है — इसलिए यह समान समय अंतराल में समान दूरी तय नहीं करती।
अन्य उदाहरण — 100 मीटर दौड़ लगाता व्यक्ति, उछलती गेंद। एकसमान गति समान समय अंतराल में समान
दूरी तय करती है।
RRB Group D 28/11/2018 (Morning)
946
The momentum of a moving object depends on some factors. Which of the following
statements is most appropriate?
किसी गतिमान वस्तु का संवेग कुछ कारकों पर निर्भर करता है। निम्नलिखित में से कौन सा कथन
सबसे उपयुक्त है?
✅ Correct Answer: (B)
Momentum is a vector quantity; its formula is p = m × v (p = momentum, m = mass, v =
velocity).
The momentum of an object is directly proportional to both its mass and its velocity.
Neither mass alone nor velocity alone determines momentum — both are required.
संवेग एक सदिश राशि है; इसका सूत्र p = m × v है (p = संवेग, m = द्रव्यमान, v = वेग)।
किसी वस्तु का संवेग उसके द्रव्यमान और वेग दोनों के सीधे समानुपाती होता है।
न तो अकेले द्रव्यमान और न ही अकेले वेग संवेग को निर्धारित करता है — दोनों आवश्यक हैं।
RRB Group D 01/12/2018 (Afternoon)
947
Positive acceleration means ______.
धनात्मक त्वरण का अर्थ है ______।
✅ Correct Answer: (C)
Acceleration is defined as the rate of change of velocity. Positive acceleration means the
velocity of a body is increasing.
Negative acceleration (deceleration/retardation) means velocity is decreasing; zero
acceleration means constant velocity.
Uniform acceleration — when velocity increases by equal amounts in equal intervals of time.
त्वरण को वेग में परिवर्तन की दर के रूप में परिभाषित किया जाता है। धनात्मक त्वरण का अर्थ है
कि पिंड का वेग बढ़ रहा है।
ऋणात्मक त्वरण (मंदन/अवमंदन) का अर्थ है कि वेग घट रहा है; शून्य त्वरण का अर्थ है स्थिर वेग।
एकसमान त्वरण — जब वेग समान समय अंतराल में समान मात्रा में बढ़ता है।
RRB Group D 04/12/2018 (Afternoon)
948
The velocity of a ball thrown vertically with time will be:
लंबवत ऊपर फेंकी गई गेंद का समय के साथ वेग होगा:
✅ Correct Answer: (D)
At the moment of throwing, the ball has a positive velocity in the upward direction (taking
upward as positive by convention).
As the ball rises, gravity (acting downward) decelerates it, reducing the positive velocity;
at the highest point velocity becomes zero, then becomes negative as it falls.
So the initial velocity of a ball thrown vertically upward is positive upwards. Velocity =
displacement/time.
फेंकने के क्षण, गेंद का वेग ऊपर की दिशा में धनात्मक होता है (परंपरा के अनुसार ऊपर की दिशा को
धनात्मक मानते हुए)।
जैसे-जैसे गेंद ऊपर उठती है, गुरुत्व (नीचे की ओर कार्य करते हुए) उसे मंद करता है, जिससे
धनात्मक वेग घटता है; उच्चतम बिंदु पर वेग शून्य हो जाता है, फिर गिरते समय ऋणात्मक हो जाता है।
इसलिए लंबवत ऊपर फेंकी गई गेंद का प्रारंभिक वेग ऊपर की ओर धनात्मक होता है। वेग =
विस्थापन/समय।
RRB Group D 04/12/2018 (Evening)
949
Which of the following is the effect of a balanced force applied to an object?
किसी वस्तु पर संतुलित बल लगाने का प्रभाव निम्नलिखित में से क्या है?
✅ Correct Answer: (A)
A balanced force means the net force on the object is zero, so its state of motion does not
change — no acceleration, no change in speed or direction.
However, balanced forces can still cause a change in shape of an object
(deformation/compression/stretching) without changing its state of motion.
An unbalanced force is required to change either the speed or direction of motion of an
object.
संतुलित बल का अर्थ है कि वस्तु पर परिणामी बल शून्य है, इसलिए उसकी गति की अवस्था नहीं बदलती —
कोई त्वरण नहीं, चाल या दिशा में कोई परिवर्तन नहीं।
हालांकि, संतुलित बल फिर भी वस्तु के आकार में परिवर्तन (विरूपण/संपीडन/खिंचाव) कर सकता है,
बिना उसकी गति की अवस्था बदले।
किसी वस्तु की चाल या दिशा में परिवर्तन के लिए असंतुलित बल आवश्यक है।
RRB Group D 04/12/2018 (Evening)
950
In a confrontation _____ is always saved.
टकराव में _____ हमेशा संरक्षित रहता है।
✅ Correct Answer: (C)
This refers to the Principle of Conservation of Momentum — in an isolated system (no
external forces), total momentum is always conserved.
Momentum is the product of mass and velocity, has both direction and magnitude; SI unit — kg
m s⁻¹.
Force is an external agent capable of changing a body's state of rest or motion; SI unit —
newton.
यह संवेग संरक्षण के सिद्धांत को संदर्भित करता है — किसी पृथक तंत्र (बिना बाह्य बल के) में
कुल संवेग हमेशा संरक्षित रहता है।
संवेग द्रव्यमान और वेग का गुणनफल है, इसमें दिशा और परिमाण दोनों होते हैं; SI इकाई — kg m
s⁻¹।
बल एक बाह्य कारक है जो किसी पिंड की विराम या गति की अवस्था को बदलने में सक्षम है; SI इकाई —
न्यूटन।
RRB Group D 05/12/2018 (Morning)
951
The total quantity of motion contained in the same body is called ______.
किसी पिंड में निहित गति की कुल मात्रा को ______ कहा जाता है।
✅ Correct Answer: (C)
Momentum (kg m/s) = mass × velocity; it represents the total quantity of motion of an
object.
Related formulas — Speed = Distance/Time. Velocity = Displacement/Time. Acceleration =
Change in Velocity/Change in time.
Force = mass × acceleration. Kinetic Energy = (1/2)mv². Potential Energy = mgh. Power =
VI = I²R = V²/R.
संवेग (kg m/s) = द्रव्यमान × वेग; यह किसी वस्तु की गति की कुल मात्रा को दर्शाता है।
संबंधित सूत्र — चाल = दूरी/समय। वेग = विस्थापन/समय। त्वरण = वेग में परिवर्तन/समय में
परिवर्तन।
बल = द्रव्यमान × त्वरण। गतिज ऊर्जा = (1/2)mv²। स्थितिज ऊर्जा = mgh। शक्ति = VI =
I²R = V²/R।
RRB Group D 06/12/2018 (Morning)
952
The pressure exerted by a solid decreases with increase in ______.
किसी ठोस द्वारा लगाया गया दाब ______ बढ़ने पर घट जाता है।
✅ Correct Answer: (B)
Pressure P = F/A. For a given force, pressure is inversely proportional to area — as area
increases, pressure decreases.
Example — snowshoes spread weight over a larger area to reduce pressure on snow; knife
blades are sharp (small area) to exert high pressure for cutting.
Area — SI unit square metre (m²). Force — SI unit newton (N).
दाब P = F/A। किसी निश्चित बल के लिए, दाब क्षेत्रफल के व्युत्क्रमानुपाती होता है — क्षेत्रफल
बढ़ने पर दाब घटता है।
उदाहरण — बर्फ के जूते वजन को बड़े क्षेत्रफल में फैलाते हैं ताकि बर्फ पर दाब कम हो; चाकू की
धार तेज (छोटा क्षेत्रफल) होती है ताकि काटने के लिए उच्च दाब लगे।
क्षेत्रफल — SI इकाई वर्ग मीटर (m²)। बल — SI इकाई न्यूटन (N)।
RRB Group D 07/12/2018 (Morning)
953
If the velocity of an object is proportional to the time elapsed, then the velocity
of the object will be __________.
यदि किसी वस्तु का वेग बीते समय के समानुपाती हो, तो वस्तु का वेग __________ होगा।
✅ Correct Answer: (B)
If velocity is directly proportional to time elapsed (v ∝ t), then v = at, where a is
the constant of proportionality (acceleration).
This means velocity increases linearly with time — the definition of uniform acceleration.
Uniform acceleration is the constant rate of change of velocity with respect to time: a =
dv/dt. SI unit — m/s².
यदि वेग बीते समय के सीधे समानुपाती हो (v ∝ t), तो v = at, जहां a समानुपातिक नियतांक
(त्वरण) है।
इसका अर्थ है कि वेग समय के साथ रैखिक रूप से बढ़ता है — यही एकसमान त्वरण की परिभाषा है।
एकसमान त्वरण समय के सापेक्ष वेग में परिवर्तन की स्थिर दर है: a = dv/dt। SI इकाई — m/s²।
RRB Group D 07/12/2018 (Evening)
954
Zero acceleration means ______.
शून्य त्वरण का अर्थ है ______।
✅ Correct Answer: (A)
Zero acceleration means an object's velocity is not changing.
If the change in velocity is zero — i.e., the object is either at rest or moving with
uniform velocity — the object has zero acceleration.
A body can have constant (even non-zero) velocity and still have zero acceleration, as long
as both speed and direction remain unchanged.
शून्य त्वरण का अर्थ है कि वस्तु का वेग नहीं बदल रहा।
यदि वेग में परिवर्तन शून्य है — अर्थात वस्तु विराम में है या एकसमान वेग से गति कर रही है —
तो वस्तु का त्वरण शून्य कहा जाता है।
किसी पिंड का वेग स्थिर (यहां तक कि अशून्य भी) हो सकता है और फिर भी उसका त्वरण शून्य हो सकता
है, जब तक चाल और दिशा दोनों अपरिवर्तित रहें।
RRB Group D 12/12/2018 (Morning)
955
Pressure is defined as _______.
दाब को _______ के रूप में परिभाषित किया जाता है।
✅ Correct Answer: (D)
Pressure is defined as force (thrust) divided by the area over which it is applied,
perpendicular to the surface. P = F/A = Thrust/Area.
SI unit for pressure is the Pascal, where 1 Pa = 1 N/m².
Product of mass and acceleration = Force (Newton's second law); weight per unit volume and
mass per unit volume both relate to density.
दाब को बल (प्रणोद) को उस क्षेत्रफल से विभाजित करने पर परिभाषित किया जाता है जिस पर वह सतह के
लंबवत लगाया जाता है। P = F/A = प्रणोद/क्षेत्रफल।
दाब की SI इकाई पास्कल है, जहां 1 Pa = 1 N/m²।
द्रव्यमान और त्वरण का गुणनफल = बल (न्यूटन का दूसरा नियम); प्रति इकाई आयतन भार और प्रति इकाई
आयतन द्रव्यमान दोनों घनत्व से संबंधित हैं।
RRB Group D 12/12/2018 (Morning)
956
To find the displacement, we have to draw a ___________ from the initial position to
the final position.
विस्थापन ज्ञात करने के लिए, हमें प्रारंभिक स्थिति से अंतिम स्थिति तक एक ___________
खींचनी होती है।
✅ Correct Answer: (C)
Displacement is the distance between an object's initial and final positions, measured along
the shortest path between them.
It is usually measured along a straight line drawn from the initial position to the final
position.
Displacement is a vector quantity with both magnitude and direction; it can be zero even if
the distance travelled is non-zero (e.g., returning to the starting position).
विस्थापन किसी वस्तु की प्रारंभिक और अंतिम स्थिति के बीच की दूरी है, जिसे उनके बीच के सबसे
छोटे पथ के अनुदिश मापा जाता है।
इसे आमतौर पर प्रारंभिक स्थिति से अंतिम स्थिति तक खींची गई सरल रेखा के अनुदिश मापा जाता है।
विस्थापन एक सदिश राशि है जिसमें परिमाण और दिशा दोनों होते हैं; यह शून्य हो सकता है भले ही तय
की गई दूरी अशून्य हो (जैसे प्रारंभिक स्थिति पर वापस लौटना)।
RRB Group D 12/12/2018 (Afternoon)
957
The acceleration of an object is the change in its ______ per unit time.
किसी वस्तु का त्वरण उसके ______ में प्रति इकाई समय परिवर्तन है।
✅ Correct Answer: (A)
Acceleration is the rate of change of velocity. Velocity is a vector quantity describing
both speed and direction of motion.
Acceleration = Change in velocity / Time taken. SI unit — metres per second squared
(m/s²).
Force = mass × acceleration (not change per unit time). Momentum = mass × velocity.
Displacement is a change in position, not directly related to acceleration.
त्वरण वेग में परिवर्तन की दर है। वेग एक सदिश राशि है जो गति की चाल और दिशा दोनों को दर्शाती
है।
त्वरण = वेग में परिवर्तन / लिया गया समय। SI इकाई — मीटर प्रति सेकंड वर्ग (m/s²)।
बल = द्रव्यमान × त्वरण (प्रति इकाई समय परिवर्तन नहीं)। संवेग = द्रव्यमान × वेग। विस्थापन
स्थिति में परिवर्तन है, जो सीधे त्वरण से संबंधित नहीं है।
RRB Group D 13/12/2018 (Afternoon)
958
The tendency of a body to resist acceleration is called__________.
किसी पिंड की त्वरण का विरोध करने की प्रवृत्ति__________ कहलाती है।
✅ Correct Answer: (A)
Inertia is the natural tendency of an object to resist its stationary state or state of
motion (and hence resist any change, including acceleration).
The Law of Inertia (Newton's First Law) states that every body continues in its state of
rest or uniform motion in a straight line unless compelled by an external force to act
otherwise.
The greater the mass of an object, the greater its inertia and the greater the force needed
to accelerate it.
जड़त्व किसी वस्तु की अपनी स्थिर अवस्था या गति की अवस्था का विरोध करने की स्वाभाविक प्रवृत्ति
है (और इसलिए त्वरण सहित किसी भी परिवर्तन का विरोध करती है)।
जड़त्व का नियम (न्यूटन का पहला नियम) कहता है कि प्रत्येक पिंड अपनी विराम अवस्था या सीधी रेखा
में एकसमान गति की अवस्था में बना रहता है जब तक कोई बाह्य बल उसे अन्यथा करने के लिए बाध्य न
करे।
किसी वस्तु का द्रव्यमान जितना अधिक होगा, उसका जड़त्व उतना ही अधिक होगा और उसे त्वरित करने के
लिए उतने ही अधिक बल की आवश्यकता होगी।
RRB Group D 14/12/2018 (Afternoon)
959
The_________ of a body is the force with which the earth attracts it.
किसी पिंड का_________ वह बल है जिससे पृथ्वी उसे आकर्षित करती है।
✅ Correct Answer: (B)
Weight is the force with which the Earth (or any gravitational body) attracts an object.
It is a vector quantity with both magnitude and direction (always directed towards the
centre of the Earth). SI unit — Newton (N).
Formula: Weight = mass × acceleration due to gravity = mg. Weight varies with location
(varies with gravity), unlike mass, which remains constant.
भार वह बल है जिससे पृथ्वी (या कोई भी गुरुत्वीय पिंड) किसी वस्तु को आकर्षित करती है।
यह एक सदिश राशि है जिसमें परिमाण और दिशा दोनों होते हैं (हमेशा पृथ्वी के केंद्र की ओर
निर्देशित)। SI इकाई — न्यूटन (N)।
सूत्र: भार = द्रव्यमान × गुरुत्वीय त्वरण = mg। भार स्थान के साथ बदलता है (गुरुत्व के साथ
बदलता है), जबकि द्रव्यमान स्थिर रहता है।
RRB Group D 14/12/2018 (Evening)
960
Which of the following never occurs singly in nature?
निम्नलिखित में से कौन सा प्रकृति में कभी अकेले नहीं होता?
✅ Correct Answer: (B)
Force (F) is an external agent capable of changing a body's state of rest or motion. SI unit
— Newton.
Force never occurs singly in nature — for every force there is always an equal and opposite
reaction force (Newton's Third Law), which is why forces always occur in pairs.
Inertia opposes changes in a body's state of rest or motion; momentum is mass × velocity;
velocity is displacement per unit time.
बल (F) एक बाह्य कारक है जो किसी पिंड की विराम या गति की अवस्था को बदलने में सक्षम है। SI
इकाई — न्यूटन।
बल प्रकृति में कभी अकेले नहीं होता — हर बल की एक बराबर और विपरीत प्रतिक्रिया होती है (न्यूटन
का तीसरा नियम), इसीलिए बल हमेशा जोड़ों में होते हैं।
जड़त्व किसी पिंड की विराम या गति की अवस्था में परिवर्तन का विरोध करता है; संवेग द्रव्यमान ×
वेग है; वेग प्रति इकाई समय विस्थापन है।
RRB ALP Tier-I (09/08/2018) Afternoon
961
In Force equation, F is equal to:
बल के समीकरण में, F बराबर है:
✅ Correct Answer: (A)
Force is an external agent capable of changing a body's state of rest or motion. It is a
vector quantity. Formula: Force (F) = Mass (m) × Acceleration (a). SI unit — Newton (N).
Other units — dyne, poundal, pound-force, kip, kilopond.
Potential Energy (PE) = mgh; Momentum (p) = mv; Newton's first equation of motion: v = u +
at.
बल एक बाह्य कारक है जो किसी पिंड की विराम या गति की अवस्था को बदलने में सक्षम है। यह एक सदिश
राशि है। सूत्र: बल (F) = द्रव्यमान (m) × त्वरण (a)। SI इकाई — न्यूटन (N)।
अन्य इकाइयां — डाइन, पाउंडल, पाउंड-फोर्स, किप, किलोपोंड।
स्थितिज ऊर्जा (PE) = mgh; संवेग (p) = mv; न्यूटन का गति का पहला समीकरण: v = u + at।
RRB ALP Tier-I (13/08/2018) Evening
962
The characteristic of _______ is used in the braking pads of cars.
कारों के ब्रेक पैड में _______ के गुण का उपयोग किया जाता है।
✅ Correct Answer: (A)
Friction is the opposing force that comes into play when two bodies come in contact with
each other. f = μN, where f = friction force, μ = coefficient of friction, N = normal
force.
Applications of friction — lighting matchsticks, writing on paper with a pen, walking on the
ground.
The brake pads of cars use the positive effect of friction — when pads are pressed against
the brake disc/drum, friction slows the rotation of the wheel, stopping the car.
घर्षण वह विरोधी बल है जो दो पिंडों के संपर्क में आने पर कार्य करता है। f = μN, जहां f =
घर्षण बल, μ = घर्षण गुणांक, N = अभिलंब बल।
घर्षण के उपयोग — माचिस जलाना, कलम से कागज पर लिखना, जमीन पर चलना।
कारों के ब्रेक पैड घर्षण के सकारात्मक प्रभाव का उपयोग करते हैं — जब पैड को ब्रेक डिस्क/ड्रम
पर दबाया जाता है, तो घर्षण पहिये के घूर्णन को धीमा कर कार को रोक देता है।
RRB ALP Tier-I (14/08/2018) Evening
963
The SI unit of weight is a:
भार की SI इकाई है:
✅ Correct Answer: (C)
The SI unit of weight is measured in kg⋅m/s², which is equal to a Newton (N). Weight of
any substance (W) = mg, where m = mass, g = gravity.
Weight has both magnitude and direction; hence weight is a vector quantity.
Other important SI units — Mass: kilogram (Kg). Length: metre (m). Time: second (s).
Current: ampere (A). Temperature: kelvin (K). Amount of substance: mole (mol). Luminous
intensity: candela (cd).
भार की SI इकाई kg⋅m/s² में मापी जाती है, जो एक न्यूटन (N) के बराबर है। किसी पदार्थ का
भार (W) = mg, जहां m = द्रव्यमान, g = गुरुत्व।
भार में परिमाण और दिशा दोनों होते हैं; इसलिए भार एक सदिश राशि है।
अन्य महत्वपूर्ण SI इकाइयां — द्रव्यमान: किलोग्राम (Kg)। लंबाई: मीटर (m)। समय: सेकंड (s)।
धारा: एम्पीयर (A)। तापमान: केल्विन (K)। पदार्थ की मात्रा: मोल (mol)। ज्योति तीव्रता: कैंडेला
(cd)।
RRB ALP Tier-I (17/08/2018) Afternoon
964
Definition of Force can be stated from:
बल की परिभाषा किससे कही जा सकती है?
✅ Correct Answer: (B)
Newton's second law of motion — force equals the rate of change of momentum, and is the
product of mass and acceleration (F = ma). This law provides the quantitative definition of
force.
Newton's first law (Law of Inertia) tells us qualitatively what force does but does not
define it mathematically.
Newton's third law describes pairs of forces (action-reaction), not the definition of force.
Newton's Law of Universal Gravitation deals with mutual attraction between masses.
न्यूटन का दूसरा नियम — बल संवेग में परिवर्तन की दर के बराबर है, और यह द्रव्यमान और त्वरण का
गुणनफल है (F = ma)। यह नियम बल की मात्रात्मक परिभाषा देता है।
न्यूटन का पहला नियम (जड़त्व का नियम) गुणात्मक रूप से बताता है कि बल क्या करता है, परंतु इसे
गणितीय रूप से परिभाषित नहीं करता।
न्यूटन का तीसरा नियम बलों के जोड़े (क्रिया-प्रतिक्रिया) का वर्णन करता है, बल की परिभाषा का
नहीं। न्यूटन का सार्वत्रिक गुरुत्वाकर्षण नियम द्रव्यमानों के बीच पारस्परिक आकर्षण से संबंधित
है।
RRB ALP Tier-I (20/08/2018) Evening
965
Which of the following physical quantities changes or tends to change the state of
rest or of uniform motion of a body in a straight line?
निम्नलिखित में से कौन सी भौतिक राशि किसी पिंड की विराम अवस्था या सीधी रेखा में एकसमान
गति की अवस्था को बदलती है या बदलने की प्रवृत्ति रखती है?
✅ Correct Answer: (B)
Force (defined as the product of mass and acceleration) changes or tends to change the state
of rest or uniform motion of a body in a straight line.
Newton's First Law — a body continues in its state of rest or uniform motion along a
straight line unless acted upon by some external force.
Mass is the amount of matter (a scalar quantity, does not cause change by itself); inertia
opposes change rather than causing it; momentum (p = mv) is caused to change by force, but
momentum itself does not cause change.
बल (द्रव्यमान और त्वरण के गुणनफल के रूप में परिभाषित) किसी पिंड की विराम अवस्था या सीधी रेखा
में एकसमान गति की अवस्था को बदलता है या बदलने की प्रवृत्ति रखता है।
न्यूटन का पहला नियम — कोई पिंड अपनी विराम अवस्था या सीधी रेखा में एकसमान गति की अवस्था में
तब तक बना रहता है जब तक उस पर कोई बाह्य बल न लगे।
द्रव्यमान पदार्थ की मात्रा है (एक अदिश राशि, स्वयं परिवर्तन का कारण नहीं बनता); जड़त्व
परिवर्तन का विरोध करता है न कि उसका कारण बनता है; संवेग (p = mv) में परिवर्तन बल के कारण
होता है, परंतु संवेग स्वयं परिवर्तन का कारण नहीं बनता।