धातु, अधातु और मिश्र धातु (MCQ) — प्रश्न 142 – 274
Total: 0/133Correct: 0Wrong: 0
142
What happens when sodium metal reacts with water?
जब सोडियम धातु पानी के साथ अभिक्रिया करती है तो क्या होता है?
✅ Correct Answer: (A)
It is an exothermic reaction. 2Na(s) + 2H2O → 2NaOH(aq) + H2(g).
The resultant is non-colored and basic in nature.
Sodium hydroxide solution (pH-14): used to produce soaps, rayon, paper, products that explode, dyes, and petroleum products.
यह एक ऊष्माक्षेपी अभिक्रिया है।
2Na(s) + 2H2O → 2NaOH(aq) + H2(g)।
परिणामी उत्पाद रंगहीन और प्रकृति में क्षारीय होता है।
सोडियम हाइड्रॉक्साइड विलयन (pH-14): इसका उपयोग साबुन, रेयान, कागज, विस्फोटक उत्पादों, रंजक और पेट्रोलियम उत्पादों के निर्माण में किया जाता है।
RRC Group D 18/08/2022 (Evening)
143
The elements which have 2 electrons in their outermost shell are generally ……….
जिन तत्वों के सबसे बाहरी कोश में 2 इलेक्ट्रॉन होते हैं, वे सामान्यतः ………. होते हैं।
✅ Correct Answer: (D)
Metal. Non-metals are such elements which have 4, 5, 6 and 7 electrons in their outermost shell.
Examples are carbon, oxygen chlorine etc. Metals are such elements which have generally 1, 2, 3 valence electrons.
Examples are Sodium, Potassium, Copper etc. The noble gases (the inert gasses and aerogenes) - belong to group 18 of the modern periodic table (helium, neon, argon, krypton, xenon, and radon).
Metalloid - a chemical element that exhibits some metal and some nonmetal properties.
Example - Boron, germanium, silicon, antimony, arsenic etc.
धातु। अधातु ऐसे तत्व हैं जिनके सबसे बाहरी कोश में 4, 5, 6 और 7 इलेक्ट्रॉन होते हैं।
उदाहरण- कार्बन, ऑक्सीजन, क्लोरीन आदि।
धातुएँ ऐसे तत्व हैं जिनमें सामान्यतः 1, 2, 3 संयोजी इलेक्ट्रॉन होते हैं।
उदाहरण- सोडियम, पोटेशियम, तांबा आदि।
उत्कृष्ट गैसें (अक्रिय गैसें) - आधुनिक आवर्त सारणी के समूह 18 से संबंधित हैं (हीलियम, नियॉन, आर्गन, क्रिप्टन, ज़ेनॉन और रेडॉन)।
उपधातु - एक रासायनिक तत्व जो धातु और अधातु दोनों के कुछ गुण प्रदर्शित करता है।
उदाहरण - बोरॉन, जर्मेनियम, सिलिकॉन, सुरमा (antimony), आर्सेनिक आदि।
RRC Group D 23/08/2022 (Evening)
144
Which of the following is a non-metallic form of mineral?
निम्नलिखित में से कौन सा खनिज का अधात्विक रूप है?
✅ Correct Answer: (B)
Mica. Some other important Non Metallic Minerals - Limestone, gypsum, coal, dolomite, phosphate, salt, and granite.
टंगस्टन (बहुत उच्च गलनांक (3422° सेल्सियस)) का उपयोग तापदीप्त बल्ब का फिलामेंट बनाने में किया जाता है।
RRC Group D 26/08/2022 (Evening)
145
Which of the following metals are more reactive than hydrogen?
Mg, Zn, Hg, Ag, Sn, Pb, Au, Fe, Na
निम्नलिखित में से कौन सी धातुएँ हाइड्रोजन से अधिक अभिक्रियाशील हैं?
Mg, Zn, Hg, Ag, Sn, Pb, Au, Fe, Na
✅ Correct Answer: (C)
Mg (Magnesium), Zn (Zinc), Sn (Tin), Pb (Lead), Fe (Iron), Na (Sodium).
Reactivity series - Arrangement of metals in the descending order of their reactivities.
All metals that are found above hydrogen in the activity series liberate H2 gas upon reacting with dilute HCl or dilute H2SO4.
It means that they are more reactive than hydrogen.
Mg (मैग्नीशियम), Zn (जिंक), Sn (टिन), Pb (सीसा), Fe (लोहा), Na (सोडियम)।
अभिक्रियाशीलता श्रेणी - धातुओं को उनकी अभिक्रियाशीलता के अवरोही क्रम में व्यवस्थित करना।
सक्रियता श्रेणी में हाइड्रोजन के ऊपर पाई जाने वाली सभी धातुएँ तनु HCl या तनु H2SO4 के साथ अभिक्रिया करने पर H2 गैस मुक्त करती हैं।
इसका अर्थ है कि वे हाइड्रोजन से अधिक अभिक्रियाशील हैं।
RRC Group D 29/08/2022 (Morning)
146
Consider the below statements and identify the correct answer.
Statement I: Metals are electropositive in nature.
Statement II: Metals tend to lose electrons while forming bonds.
नीचे दिए गए कथनों पर विचार करें और सही उत्तर पहचानें।
कथन I: धातुएँ प्रकृति में विद्युत धनात्मक (electropositive) होती हैं।
कथन II: आबंध बनाते समय धातुओं की प्रवृत्ति इलेक्ट्रॉन खोने की होती है।
✅ Correct Answer: (B)
Electron gain or loss can give an atom a filled outermost electron shell and make it energetically more stable.
Electropositive metals lose electrons from their outermost shell in order to become positively charged.
The list of top 5 electropositive elements: Cesium, Rubidium, Potassium, Sodium, Lithium.
इलेक्ट्रॉन प्राप्त करने या खोने से परमाणु का सबसे बाहरी इलेक्ट्रॉन कोश भर सकता है और यह ऊर्जा के रूप में अधिक स्थिर हो सकता है।
विद्युत धनात्मक धातुएं धनावेशित होने के लिए अपने सबसे बाहरी कोश से इलेक्ट्रॉन खो देती हैं।
शीर्ष 5 विद्युत धनात्मक तत्वों की सूची: सीज़ियम, रूबिडियम, पोटेशियम, सोडियम, लिथियम।
RRC Group D 29/08/2022 (Evening)
147
Which element is NOT more reactive than copper?
कौन सा तत्व तांबे से अधिक अभिक्रियाशील नहीं है?
✅ Correct Answer: (A)
Ag. The reactivity series of metals (activity series) refers to the arrangement of metals in the descending order of their reactivities.
Only 3 Elements are less reactive than Copper, one of them is silver (Ag) and the other two are Gold (Au) and Platinum (Pt) and all remaining are more reactive than copper as per the Reactivity series.
The more reactive element can displace the less reactive element from its solution.
Ag (चांदी)। धातुओं की अभिक्रियाशीलता श्रेणी का तात्पर्य धातुओं को उनकी अभिक्रियाशीलता के अवरोही क्रम में व्यवस्थित करने से है।
केवल 3 तत्व तांबे से कम अभिक्रियाशील हैं, उनमें से एक चांदी (Ag) है और अन्य दो सोना (Au) और प्लैटिनम (Pt) हैं और शेष सभी अभिक्रियाशीलता श्रेणी के अनुसार तांबे की तुलना में अधिक अभिक्रियाशील हैं।
अधिक अभिक्रियाशील तत्व कम अभिक्रियाशील तत्व को उसके विलयन से विस्थापित कर सकता है।
RRC Group D 02/09/2022 (Morning)
148
Which of the following elements is most metallic in nature?
निम्नलिखित में से कौन सा तत्व प्रकृति में सर्वाधिक धात्विक है?
✅ Correct Answer: (C)
Barium (Ba). Elements with metallic character are placed in alkali metals, alkaline earth metals as well as transition metals.
Metallic character is associated with the elements that are metals.
Francium (Fr) is the most metallic element and it is radioactive in nature while Cesium (Cs) is the most metallic natural element.
बेरियम (Ba)। धात्विक गुण वाले तत्वों को क्षार धातुओं, क्षारीय मृदा धातुओं के साथ-साथ संक्रमण धातुओं में रखा जाता है।
धात्विक गुण उन तत्वों से जुड़ा है जो धातु हैं।
फ्रेंशियम (Fr) सबसे अधिक धात्विक तत्व है और यह प्रकृति में रेडियोधर्मी है जबकि सीज़ियम (Cs) सबसे अधिक धात्विक प्राकृतिक तत्व है।
RRC Group D 02/09/2022 (Afternoon)
149
Which of the following metals is obtained by electrolysis?
Na, Zn, Au, Ag, Mg, Al, Cu
निम्नलिखित में से कौन सी धातु विद्युत अपघटन (electrolysis) द्वारा प्राप्त की जाती है?
Na, Zn, Au, Ag, Mg, Al, Cu
✅ Correct Answer: (D)
Na, Mg, Al. Electrolysis - It is a process that leads to chemical change when an electric current is passed through an electrolyte.
Metals like Na, Mg, Al, Ca are very reactive.
So, they are not available in free state and cannot be obtained from their compounds by simple heating or calcination.
Sodium (Na) and magnesium (Mg) metals are produced by the electrolysis of their fused chlorides and Aluminium (Al) is produced by electrolysis of Aluminium oxide in presence of cryolite.
Na, Mg, Al। विद्युत अपघटन (Electrolysis) - यह एक ऐसी प्रक्रिया है जिसमें इलेक्ट्रोलाइट के माध्यम से विद्युत धारा प्रवाहित करने पर रासायनिक परिवर्तन होता है।
Na, Mg, Al, Ca जैसी धातुएँ बहुत अभिक्रियाशील होती हैं।
इसलिए, वे मुक्त अवस्था में उपलब्ध नहीं होती हैं और साधारण तापन या निस्तापन द्वारा उनके यौगिकों से प्राप्त नहीं की जा सकती हैं।
सोडियम (Na) और मैग्नीशियम (Mg) धातुएं उनके संगलित क्लोराइड के विद्युत अपघटन द्वारा निर्मित होती हैं और एल्युमीनियम (Al) क्रायोलाइट की उपस्थिति में एल्युमीनियम ऑक्साइड के विद्युत अपघटन द्वारा निर्मित होता है।
RRC Group D 05/09/2022 (Morning)
150
Consider the below statements and identify the correct answer.
Statement-I: The compounds formed by the transfer of electrons from a metal to a non-metal are known as electrovalent compounds.
Statement-II: Electrovalent compounds are generally soluble in water and insoluble in solvent such as kerosene, petrol etc.
नीचे दिए गए कथनों पर विचार करें और सही उत्तर पहचानें।
कथन-I: किसी धातु से अधातु में इलेक्ट्रॉनों के स्थानांतरण से बनने वाले यौगिकों को वैद्युतसंयोजी (electrovalent) यौगिक कहा जाता है।
कथन-II: वैद्युतसंयोजी यौगिक आमतौर पर पानी में घुलनशील होते हैं और मिट्टी के तेल, पेट्रोल आदि विलायक में अघुलनशील होते हैं।
✅ Correct Answer: (B)
Electrovalent or Ionic Compounds: Formed by the complete transfer of electrons.
Properties: high melting and boiling points, hard and brittle, solids at room temperature.
Metalloids (shiny appearance and brittle) - function as insulators at room temperature, but transform into conductors when heated or mixed with other elements.
सिलिकॉन और जर्मेनियम।
उपधातु (Semimetals या metalloids) - धातु और अधातु दोनों के गुणों को साझा करते हैं।
महत्वपूर्ण अर्धचालक (semiconductors) और उपधातुओं का उपयोग अक्सर कंप्यूटर और अन्य विद्युत उपकरणों में किया जाता है।
उदाहरण - बोरॉन, सिलिकॉन, जर्मेनियम, आर्सेनिक, सुरमा (Antimony), टेल्यूरियम, पोलोनियम और टेनेसीन।
उपधातु (चमकदार रूप और भंगुर) - कमरे के तापमान पर इन्सुलेटर के रूप में कार्य करते हैं, लेकिन गर्म होने पर या अन्य तत्वों के साथ मिश्रित होने पर सुचालक (conductors) में बदल जाते हैं।
RRC Group D 17/09/2022 (Evening)
156
Which of the given statements about non-metals is true?
अधातुओं के बारे में दिए गए कथनों में से कौन सा सत्य है?
✅ Correct Answer: (B)
Non-metals - Do not produce heat or electricity, brittle (can not be easily rolled, molding, extruding or pressing), non lustrous.
Example - Hydrogen (H), Carbon (C), Nitrogen (N), Oxygen (O), Phosphorus (P), Selenium (Se) etc. Metals - High melting point, good conductor of electricity and heat, high density, malleable and ductile.
Example - Aluminum (Al), Zinc (Zn), Copper (Cu), Iron (Fe).
अधातु - ऊष्मा या बिजली का चालन नहीं करती, भंगुर होती हैं (आसानी से रोल्ड, मोल्डिंग या प्रेस नहीं की जा सकती), गैर-चमकदार होती हैं।
उदाहरण - हाइड्रोजन (H), कार्बन (C), नाइट्रोजन (N), ऑक्सीजन (O), फास्फोरस (P), सेलेनियम (Se) आदि।
धातुएँ - उच्च गलनांक, बिजली और गर्मी का अच्छा सुचालक, उच्च घनत्व, आघातवर्ध्य और तन्य।
उदाहरण - एल्यूमिनियम (Al), जिंक (Zn), तांबा (Cu), लोहा (Fe)।
RRC Group D 18/09/2022 (Morning)
157
Metals are electropositive in nature. Which of the following is the correct explanation for the given assertion?
धातुएँ प्रकृति में विद्युत धनात्मक होती हैं। दिए गए अभिकथन (assertion) के लिए निम्नलिखित में से कौन सी सही व्याख्या है?
✅ Correct Answer: (A)
Metals lose electrons to form cations.
Metals are materials holding or possessing the characteristics of being shiny, hard, fusible, malleable, ductile, etc. Examples - Gold (Au), Silver (Ag), Aluminium (Al), Copper (Cu), Iron (Fe) etc. Metals (Electropositive Nature), lose electrons from their outermost shell in order to become stable and positively charged.
Non-metals (Electronegative Nature), gain electrons in order to become stable and negatively charged.
धनायन (cations) बनाने के लिए धातुएँ इलेक्ट्रॉन खोती हैं।
धातुएँ चमकदार, कठोर, गलनीय, आघातवर्ध्य, तन्य आदि होने की विशेषताओं को धारण करने वाले पदार्थ हैं।
धातुएँ (विद्युत धनात्मक प्रकृति), स्थिर और धनावेशित होने के लिए अपने सबसे बाहरी कोश से इलेक्ट्रॉन खो देती हैं।
अधातुएँ (विद्युत ऋणात्मक प्रकृति), स्थिर और ऋणावेशित होने के लिए इलेक्ट्रॉन ग्रहण करती हैं।
RRC Group D 19/09/2022 (Afternoon)
158
Which of the following statements regarding metals is NOT correct?
धातुओं के संबंध में निम्नलिखित में से कौन सा कथन सही नहीं है?
✅ Correct Answer: (A)
In general, metals form acidic oxides.
Properties - Metals form basic oxides.
Metals are Electropositive in nature because all metals lose electrons from their outermost shell in order to become stable and hence become positively charged.
They are Good conductors of heat and electricity.
Non-metals are placed on the right side of the periodic table.
Non-Metals are electronegative in nature.
Non-metals form acidic oxides.
सामान्यतः धातुएँ अम्लीय ऑक्साइड बनाती हैं।
गुण - धातुएँ क्षारीय ऑक्साइड बनाती हैं।
धातुएँ प्रकृति में विद्युत धनात्मक होती हैं क्योंकि सभी धातुएँ स्थिर होने के लिए अपने सबसे बाहरी कोश से इलेक्ट्रॉन खो देती हैं और इसलिए धनावेशित हो जाती हैं।
वे ऊष्मा और विद्युत की सुचालक होती हैं।
अधातुओं को आवर्त सारणी के दाईं ओर रखा जाता है।
अधातुएँ प्रकृति में विद्युत ऋणात्मक होती हैं।
अधातुएँ अम्लीय ऑक्साइड बनाती हैं।
RRC Group D 20/09/2022 (Afternoon)
159
Which of the following metals forms a green colour coating due to corrosion?
निम्नलिखित में से किस धातु में संक्षारण (corrosion) के कारण हरे रंग की परत बन जाती है?
✅ Correct Answer: (C)
Copper. The reaction of Copper - 2Cu + H2O + CO2 + O2 → Cu(OH)2 + CuCO3.
After the reaction, a mixture of copper carbonate and copper hydroxide is formed which is green in colour.
Corrosion: A natural process that causes the transformation of pure metals into undesirable substances when they react with substances like water or air.
Metals colour due to corrosion: Iron (Reddish brown), Silver (black coating), etc. Rusting: The process where iron corrodes due to exposure to the atmosphere.
तांबा। तांबे की अभिक्रिया - 2Cu + H2O + CO2 + O2 → Cu(OH)2 + CuCO3।
अभिक्रिया के बाद कॉपर कार्बोनेट और कॉपर हाइड्रॉक्साइड का मिश्रण बनता है जो हरे रंग का होता है।
संक्षारण: एक प्राकृतिक प्रक्रिया जो शुद्ध धातुओं को अवांछनीय पदार्थों में बदल देती है जब वे पानी या हवा जैसे पदार्थों के साथ अभिक्रिया करते हैं।
संक्षारण के कारण धातुओं का रंग: लोहा (लाल भूरा), चांदी (काली परत), आदि।
जंग लगना (Rusting): वह प्रक्रिया जहाँ वातावरण के संपर्क के कारण लोहे का संक्षारण होता है।
RRC Group D 22/09/2022 (Evening)
160
The allotrope of which non-metal conducts electricity?
किस अधातु का अपररूप (allotrope) विद्युत का चालन करता है?
✅ Correct Answer: (C)
Carbon. Graphite is an allotrope of the non-metal carbon which conducts electricity.
Allotropes are two or more forms of the same elements that exist in the same physical state (solid, liquid, or gas) but have physical and chemical properties that differ from one another.
Non-metals are found in the Periodic Table's top right corner.
Diamond is the purest crystalline allotrope of carbon.
It has a number of carbons linked together tetrahedrally.
कार्बन। ग्रेफाइट अधातु कार्बन का एक अपररूप है जो विद्युत का चालन करता है।
अपररूप एक ही तत्व के दो या दो से अधिक रूप होते हैं जो समान भौतिक अवस्था (ठोस, तरल या गैस) में मौजूद होते हैं लेकिन उनके भौतिक और रासायनिक गुण एक दूसरे से भिन्न होते हैं।
अधातुएँ आवर्त सारणी के शीर्ष दाएँ कोने में पाई जाती हैं।
हीरा कार्बन का सबसे शुद्ध क्रिस्टलीय अपररूप है।
इसमें चतुष्फलकीय (tetrahedrally) रूप से आपस में जुड़े हुए कई कार्बन होते हैं।
RRC Group D 30/09/2022 (Morning)
161
Arrange the following metals in the correct order of reactivity.
K, Al, Fe, Au, Pb
निम्नलिखित धातुओं को अभिक्रियाशीलता के सही क्रम में व्यवस्थित करें।
K, Al, Fe, Au, Pb
✅ Correct Answer: (B)
K (Potassium) > Al (Aluminium) > Fe (Iron) > Pb (Lead) > Au (Gold).
The number of electrons in the outermost shell of an atom determines its reactivity.
Noble gases have low reactivity because they have full electron shells.
Halogens are highly reactive because they readily gain an electron to fill their outermost shell.
A series in which metals are arranged in the decreasing order of their reactivity is called reactivity series.
K (पोटेशियम) > Al (एल्यूमिनियम) > Fe (लोहा) > Pb (सीसा) > Au (सोना)।
किसी परमाणु के सबसे बाहरी कोश में इलेक्ट्रॉनों की संख्या उसकी अभिक्रियाशीलता निर्धारित करती है।
उत्कृष्ट गैसों की अभिक्रियाशीलता कम होती है क्योंकि उनके इलेक्ट्रॉन कोश भरे होते हैं।
हैलोजन अत्यधिक अभिक्रियाशील होते हैं क्योंकि वे अपने सबसे बाहरी कोश को भरने के लिए आसानी से एक इलेक्ट्रॉन प्राप्त कर लेते हैं।
एक श्रृंखला जिसमें धातुओं को उनकी अभिक्रियाशीलता के घटते क्रम में व्यवस्थित किया जाता है उसे अभिक्रियाशीलता श्रेणी कहा जाता है।
RRC Group D 06/10/2022 (Morning)
162
Which of the following elements is more reactive than copper?
निम्नलिखित में से कौन सा तत्व तांबे से अधिक अभिक्रियाशील है?
✅ Correct Answer: (A)
Zinc. Reactivity of an element decreases from top to bottom in the given reactivity series.
Which of the following is predominantly used for making photovoltaic solar cells?
फोटोवोल्टिक सौर सेल बनाने के लिए मुख्य रूप से निम्नलिखित में से किसका उपयोग किया जाता है?
✅ Correct Answer: (A)
Si (Silicon). A solar cell, or photovoltaic cell, is an electronic device that converts the energy of light directly into electricity by the photovoltaic effect.
By far, the most prevalent bulk material for solar cells is crystalline silicon (c-Si), also known as "solar grade silicon".
Silicon (Si, Group 14, Period 3, atomic number 14) - A semiconductor, brittle, metallic luster, exists as a solid at room temperature and pressure.
Si (सिलिकॉन)। एक सौर सेल, या फोटोवोल्टिक सेल, एक इलेक्ट्रॉनिक उपकरण है जो फोटोवोल्टिक प्रभाव द्वारा प्रकाश की ऊर्जा को सीधे बिजली में परिवर्तित करता है।
सौर सेलों के लिए अब तक का सबसे प्रचलित थोक पदार्थ क्रिस्टलीय सिलिकॉन (c-Si) है, जिसे "सौर ग्रेड सिलिकॉन" के रूप में भी जाना जाता है।
सिलिकॉन (Si, समूह 14, आवर्त 3, परमाणु क्रमांक 14) - एक अर्धचालक, भंगुर, धात्विक चमक, कमरे के तापमान और दबाव पर ठोस के रूप में मौजूद है।
RRB NTPC CBT-II (14/06/2022) Shift 2
164
Which of the following groups of metals are so soft that they can be cut with a knife and have low densities and low melting points?
धातुओं का निम्नलिखित में से कौन सा समूह इतना नरम है कि उन्हें चाकू से काटा जा सकता है और उनका घनत्व तथा गलनांक कम होता है?
✅ Correct Answer: (D)
Lithium (Li), Sodium (Na), and Potassium (K) - Their atomic bonding is quite weak, they have only 1 electron in their valence shell.
They have body centered cubic structures that have a lot of empty space and this makes metallic bonds weak.
Metals are usually very hard but alkali metals are so soft that they can be cut with a knife.
Properties: High melting points, good conductors of heat and electricity, high density, ductile (ability of the material to be stretched into a wire), Malleable (property of substances which allows them to be beaten into flat sheets).
Hardest element - Diamond; Lightest metal - Lithium; Mercury is the only metal which is liquid at room temperature.
लिथियम (Li), सोडियम (Na), और पोटेशियम (K) - इनका परमाणु बंधन काफी कमजोर होता है, इनके संयोजी कोश में केवल 1 इलेक्ट्रॉन होता है।
इनकी बॉडी-सेंटर्ड क्यूबिक संरचनाएं होती हैं जिनमें बहुत अधिक खाली स्थान होता है और यह धात्विक बांड को कमजोर बनाता है।
धातुएं आमतौर पर बहुत कठोर होती हैं लेकिन क्षार धातुएं इतनी नरम होती हैं कि उन्हें चाकू से काटा जा सकता है।
गुण: उच्च गलनांक, ऊष्मा और विद्युत के सुचालक, उच्च घनत्व, तन्य (तार में खिंचने की क्षमता), आघातवर्ध्य (पदार्थों का गुण जो उन्हें चपटी चादरों में पीटने की अनुमति देता है)।
सबसे कठोर तत्व - हीरा; सबसे हल्की धातु - लिथियम; पारा एकमात्र धातु है जो कमरे के तापमान पर तरल है।
RRB NTPC CBT-II (15/06/2022) Shift 2
165
Which of the following is an example of a non-metallic mineral?
निम्नलिखित में से कौन सा एक अधात्विक खनिज का उदाहरण है?
✅ Correct Answer: (C)
Limestone is a non-metallic mineral.
Limestone is a type of carbonate sedimentary rock which is the main source of the material lime.
It is composed principally of calcium carbonate (calcite) or the double carbonate of calcium and magnesium (dolomite).
The other three are metallic in nature.
Pyrite - also known as fool's gold.
It is iron sulfide.
चूना पत्थर एक अधात्विक खनिज है।
चूना पत्थर कार्बोनेट तलछटी चट्टान (sedimentary rock) का एक प्रकार है जो सामग्री चूने का मुख्य स्रोत है।
यह मुख्य रूप से कैल्शियम कार्बोनेट (कैल्साइट) या कैल्शियम और मैग्नीशियम (डोलोमाइट) के डबल कार्बोनेट से बना है।
अन्य तीन प्रकृति में धात्विक हैं।
पाइराइट - जिसे मूर्खों का सोना (fool's gold) भी कहा जाता है।
यह आयरन सल्फाइड है।
RRB NTPC CBT-II (15/06/2022) Shift 3
166
The ability of metals to be drawn into thin wires is called _________.
धातुओं की पतले तारों में खींचे जाने की क्षमता को _________ कहा जाता है।
✅ Correct Answer: (A)
Ductility. Solubility - It is defined as the maximum amount of a substance that will dissolve in a given amount of solvent at a specified temperature.
Reactivity - It is the rate at which a chemical substance tends to undergo a chemical reaction.
Malleability - The property of deforming a material on being pressed (or under compressive stress) and spreading in the direction perpendicular to the pressure is called malleability.
तन्यता (Ductility)।
घुलनशीलता - इसे किसी निर्दिष्ट तापमान पर विलायक की दी गई मात्रा में घुलने वाले पदार्थ की अधिकतम मात्रा के रूप में परिभाषित किया गया है।
अभिक्रियाशीलता - यह वह दर है जिस पर किसी रासायनिक पदार्थ में रासायनिक अभिक्रिया होने की प्रवृत्ति होती है।
आघातवर्ध्यता - दबाये जाने (या संपीडक तनाव के तहत) पर किसी पदार्थ के विरूपित होने और दबाव के लंबवत दिशा में फैलने के गुण को आघातवर्ध्यता कहा जाता है।
RRB NTPC CBT-I (04/01/2021) Morning
167
Which of the following is NOT generally the properties of non-metals?
निम्नलिखित में से कौन सा सामान्यतः अधातुओं का गुण नहीं है?
✅ Correct Answer: (B)
Conductors - A substance or material that allows electricity to flow through it.
Non-metal - An element that is generally a poor conductor of heat and electricity, and most properties of non-metals are opposite of metals.
Examples - Nitrogen, Fluorine, Sulphur etc. Metal - A solid material that conducts heat and electricity.
They are hard, shiny, malleable, and ductile.
Examples - Gold, Silver, Aluminium, Copper, Iron, etc.
सुचालक (Conductors) - ऐसा पदार्थ या सामग्री जो अपने माध्यम से बिजली प्रवाहित होने देती है।
अधातु - ऐसा तत्व जो आमतौर पर ऊष्मा और बिजली का कुचालक होता है, और अधातुओं के अधिकांश गुण धातुओं के विपरीत होते हैं।
उदाहरण - नाइट्रोजन, फ्लोरीन, सल्फर आदि।
धातु - एक ठोस पदार्थ जो ऊष्मा और बिजली का संचालन करता है।
वे कठोर, चमकदार, आघातवर्ध्य और तन्य होते हैं।
उदाहरण - सोना, चांदी, एल्युमीनियम, तांबा, लोहा आदि।
RRB NTPC CBT-I (18/01/2021) Evening
168
The process of forming a thick layer of aluminium oxide on the surface of aluminium so as to protect it from corrosion is called:
एल्युमीनियम की सतह पर एल्युमीनियम ऑक्साइड की एक मोटी परत बनाने की प्रक्रिया को संक्षारण से बचाने के लिए क्या कहा जाता है?
✅ Correct Answer: (B)
Anodising is an electrolytic process for producing thick oxide coatings, usually on aluminum and its alloys.
Calcination is a process where the air might be supplied in limited quantities, or the ore is heated in the absence of air.
Greasing: Process which aims at reducing friction between two moving pieces by injecting a fluid or grease to separate them.
Alloys are combinations of metals and other elements.
एनोडाइजिंग (Anodising) आमतौर पर एल्युमीनियम और इसके मिश्र धातुओं पर मोटी ऑक्साइड कोटिंग्स के उत्पादन के लिए एक विद्युत अपघटनी प्रक्रिया है।
निस्तापन (Calcination) एक प्रक्रिया है जहां हवा सीमित मात्रा में आपूर्ति की जा सकती है, या अयस्क को हवा की अनुपस्थिति में गर्म किया जाता है।
ग्रीसिंग: वह प्रक्रिया जिसका उद्देश्य दो गतिशील टुकड़ों के बीच घर्षण को कम करने के लिए तरल पदार्थ या ग्रीस डालना है।
मिश्र धातुएँ धातुओं और अन्य तत्वों के संयोजन हैं।
RRB NTPC CBT-I (29/01/2021) Morning
169
Which acid is used in the anodising process?
एनोडाइजिंग प्रक्रिया में किस अम्ल का उपयोग किया जाता है?
✅ Correct Answer: (B)
Dilute sulphuric acid (H2SO4).
Anodising: An electrochemical process that converts the metal surface to a decorative, durable and resistant to corrosion.
Aluminum ideally suited to anodizing which develops a thin oxide layer when exposed to air.
The compound of a metal found in nature is called ________.
प्रकृति में पाए जाने वाले धातु के यौगिक को ________ कहा जाता है।
✅ Correct Answer: (B)
Mineral. Ore - A deposit of minerals in the Earth's crust.
Flux - A chemical that is added to molten metal to connect with impurities that may then be removed.
Slag - The glass-like by-product left over after the desired metal has been separated from its raw ore.
खनिज। अयस्क - पृथ्वी की पपड़ी में खनिजों का जमाव।
फ्लक्स - एक रसायन जो पिघली हुई धातु में अशुद्धियों से जुड़ने के लिए मिलाया जाता है जिसे बाद में हटाया जा सकता है।
धातुमल (Slag) - कच्चे अयस्क से वांछित धातु के अलग होने के बाद बचा हुआ कांच जैसा उपोत्पाद।
RRB NTPC CBT-I (02/02/2021) Evening
171
Which of the following is an ore of thorium?
निम्नलिखित में से कौन थोरियम का अयस्क है?
✅ Correct Answer: (C)
Monazite. Carnotite, Torbernite, Pitchblende is an ore of Uranium.
Thorium (Th): (90 atomic number, 232 atomic mass) is a radioactive chemical element.
Thorium was discovered in 1828 by the Swedish chemist Jons Jacob Berzelius.
मोनाजाइट। कार्नोटाइट, टॉर्बरनाइट, पिचब्लेंड यूरेनियम का एक अयस्क है।
थोरियम (Th): (90 परमाणु क्रमांक, 232 परमाणु द्रव्यमान) एक रेडियोधर्मी रासायनिक तत्व है।
थोरियम की खोज 1828 में स्वीडिश रसायनज्ञ जोंस जैकब बर्जेलियस ने की थी।
RRB NTPC CBT-I (17/02/2021) Evening
172
Which metal is used in electroplating on iron to protect it from corrosion and formation of rust?
लोहे को संक्षारण और जंग लगने से बचाने के लिए उस पर इलेक्ट्रोप्लेटिंग में किस धातु का उपयोग किया जाता है?
✅ Correct Answer: (B)
Zinc. It is a more active metal than iron, so it reacts with oxygen and water first, preventing the iron from rusting.
Galvanization: Process of applying a protective zinc coating to steel or iron, to prevent rusting.
Zinc is also used in alloys such as brass, nickel, silver and aluminium solder.
Rusting: The exposure of iron (or an alloy of iron) to oxygen in the presence of moisture leads to the formation of rust.
जिंक। यह लोहे की तुलना में अधिक सक्रिय धातु है, इसलिए यह पहले ऑक्सीजन और पानी के साथ प्रतिक्रिया करता है, जिससे लोहे को जंग लगने से बचाया जा सकता है।
गैल्वनीकरण: जंग लगने से रोकने के लिए स्टील या लोहे पर एक सुरक्षात्मक जिंक कोटिंग लगाने की प्रक्रिया।
जिंक का उपयोग पीतल, निकल, चांदी और एल्यूमीनियम सोल्डर जैसे मिश्र धातुओं में भी किया जाता है।
जंग लगना (Rusting): नमी की उपस्थिति में लोहे (या लोहे के मिश्र धातु) के ऑक्सीजन के संपर्क में आने से जंग का निर्माण होता है।
RRB NTPC CBT-I (04/03/2021) Morning
173
Which chemical element is required to harden steel?
स्टील को कठोर बनाने के लिए किस रासायनिक तत्व की आवश्यकता होती है?
✅ Correct Answer: (A)
Manganese (Mn) - It reduces the cooling rate of steel during the process of hardening.
It increases the hardness but less than Carbon.
The maximum attainable hardness of steel solely depends on the amount of carbon or cementite.
Iron ore, coking coal and limestone are required in the ratio of approximately 4 : 2 : 1.
Vanadium (V) - It can be used to make steel alloys, in space vehicles, nuclear reactors and aircraft carriers.
Nichrome is an alloy of Nickel (Ni) and Chromium (Cr) that is used as a heating element in an electric iron.
मैंगनीज (Mn) - यह सख्त होने की प्रक्रिया के दौरान स्टील की शीतलन दर (cooling rate) को कम कर देता है।
यह कठोरता बढ़ाता है लेकिन कार्बन से कम।
स्टील की अधिकतम प्राप्य कठोरता पूरी तरह से कार्बन या सीमेन्टाइट की मात्रा पर निर्भर करती है।
लौह अयस्क, कोकिंग कोयला और चूना पत्थर लगभग 4 : 2 : 1 के अनुपात में आवश्यक हैं।
वैनेडियम (V) - इसका उपयोग स्टील मिश्र धातु बनाने, अंतरिक्ष वाहनों, परमाणु रिएक्टरों और विमान वाहक में किया जा सकता है।
नाइक्रोम निकेल (Ni) और क्रोमियम (Cr) का एक मिश्र धातु है जिसका उपयोग इलेक्ट्रिक आयरन में हीटिंग तत्व के रूप में किया जाता है।
RRB NTPC CBT-I (04/03/2021) Evening
174
Which of the following is NOT a non-ferrous metallic mineral?
निम्नलिखित में से कौन सा अलौह धात्विक खनिज (non-ferrous metallic mineral) नहीं है?
✅ Correct Answer: (B)
Mica - It is mainly used in the electrical and electronic industries.
It can be split into very thin sheets which are tough and flexible.
Bauxite - It is the ore which is used in the manufacturing of aluminium.
It is found mainly in tertiary deposits and is associated with laterite rocks.
Copper - Used for making wires, electric motors, transformers and generators.
It is alloyable, malleable and ductile.
It is also mixed with gold to provide strength to jewellery.
अभ्रक - इसका उपयोग मुख्य रूप से विद्युत और इलेक्ट्रॉनिक उद्योगों में किया जाता है।
इसे बहुत पतली चादरों में विभाजित किया जा सकता है जो कठोर और लचीली होती हैं।
बॉक्साइट - यह वह अयस्क है जिसका उपयोग एल्युमीनियम के निर्माण में किया जाता है।
यह मुख्य रूप से तृतीयक निक्षेपों (tertiary deposits) में पाया जाता है और लेटराइट चट्टानों से जुड़ा होता है।
तांबा - तार, इलेक्ट्रिक मोटर, ट्रांसफार्मर और जनरेटर बनाने के लिए उपयोग किया जाता है।
यह मिश्र धातु योग्य, आघातवर्ध्य और तन्य है।
आभूषणों को मजबूती प्रदान करने के लिए इसे सोने में भी मिलाया जाता है।
RRB NTPC CBT-I (04/03/2021) Evening
175
The elements that have intermediate properties between those of metals and non-metals are called metalloids. Which among the following is known as a metalloid?
जिन तत्वों के गुण धातु और अधातु के बीच के होते हैं, उन्हें उपधातु (metalloids) कहा जाता है। निम्नलिखित में से किसे उपधातु के रूप में जाना जाता है?
Diatomic - The elements which exist in atomic pairs bonded to each other.
Examples - Hydrogen, Fluorine etc. Uses of Sulphur - Manufacturing of fertilizers, manufacturing of matches, fireworks and gunpowder etc.
सल्फर (अधातु, परमाणु क्रमांक - 16, परमाणु द्रव्यमान - 32)।
बहुपरमाण्विक - यह अणुओं या आयनों को संदर्भित करता है जिनमें दो से अधिक परमाणु होते हैं।
उदाहरण - सेलेनियम और फॉस्फोरस।
एकपरमाण्विक (Monoatomic) - वे तत्व जो एकल परमाणु के रूप में मौजूद हैं।
उदाहरण - उत्कृष्ट गैसें (हीलियम, रेडॉन, आर्गन, ज़ेनॉन, नियॉन, क्रिप्टन)।
द्विपरमाण्विक (Diatomic) - वे तत्व जो एक दूसरे से बंधे परमाणु जोड़े में मौजूद होते हैं।
उदाहरण - हाइड्रोजन, फ्लोरीन आदि।
सल्फर के उपयोग - उर्वरकों का निर्माण, माचिस, आतिशबाजी और बारूद का निर्माण आदि।
RRB JE 24/05/2019 (Afternoon)
180
Which of the following metals is the lightest in the periodic table of elements?
तत्वों की आवर्त सारणी में निम्नलिखित में से कौन सी धातु सबसे हल्की है?
✅ Correct Answer: (C)
Lithium (Li = 3) - A soft, silvery-white, metal that heads Group 1, the alkali metals group, of the periodic table of the elements.
It reacts vigorously with water.
Heaviest metal - Osmium (Os = 76).
Bromine (Br = 35) - The only non-metal which is found in liquid state.
Iodine (I = 53) - A non-metal which is lustrous.
लिथियम (Li = 3) - एक नरम, चांदी जैसी सफेद धातु जो तत्वों की आवर्त सारणी के क्षार धातु समूह, समूह 1 का प्रमुख है।
यह पानी के साथ तीव्रता से अभिक्रिया करता है।
सबसे भारी धातु - ऑस्मियम (Os = 76)।
ब्रोमीन (Br = 35) - एकमात्र अधातु जो तरल अवस्था में पाई जाती है।
आयोडीन (I = 53) - एक अधातु जो चमकदार है।
RRB JE 24/05/2019 (Evening)
181
Lanthanides and actinides are also called_______
लैंथेनाइड्स और एक्टिनाइड्स को _______ भी कहा जाता है
✅ Correct Answer: (C)
Inner transition elements.
Lanthanides and actinides are "f-block" elements.
Lanthanides (consist of elements with atomic numbers 57 to 71) and Actinides (consist of elements from atomic numbers 89 to 103) series fall at the bottom of the modern periodic table.
Lanthanides are silver/white coloured metals that tarnish in the air due to their reactivity.
Actinides are very dense elements.
Transition elements: Elements which belong to groups 3 to 12 in the modern periodic table.
आंतरिक संक्रमण तत्व।
लैंथेनाइड्स और एक्टिनाइड्स "f-ब्लॉक" तत्व हैं।
लैंथेनाइड्स (परमाणु क्रमांक 57 से 71 वाले तत्वों से युक्त) और एक्टिनाइड्स (परमाणु क्रमांक 89 से 103 वाले तत्वों से युक्त) श्रृंखला आधुनिक आवर्त सारणी के नीचे आते हैं।
लैंथेनाइड्स चांदी/सफेद रंग की धातुएं हैं जो अपनी अभिक्रियाशीलता के कारण हवा में धूमिल हो जाती हैं।
एक्टिनाइड्स बहुत सघन तत्व हैं।
संक्रमण तत्व: ऐसे तत्व जो आधुनिक आवर्त सारणी में समूह 3 से 12 तक के हैं।
RRB JE 24/05/2019 (Evening)
182
Which of the following non-metals is a good conductor of electricity?
निम्नलिखित में से कौन सी अधातु विद्युत की सुचालक है?
✅ Correct Answer: (C)
Graphite. It is an allotrope of carbon.
Under high pressures and temperatures, graphite converts to diamond.
Bromine (Br, 35) - The only non-metal which is liquid at room temperature.
Phosphorus (P, 15) - A multivalent non-metal of the nitrogen group.
Hydrogen (H, 1) - The lightest element in the periodic table.
ग्रेफाइट। यह कार्बन का एक अपररूप है।
उच्च दबाव और तापमान के तहत, ग्रेफाइट हीरे में परिवर्तित हो जाता है।
ब्रोमीन (Br, 35) - एकमात्र अधातु जो कमरे के तापमान पर तरल है।
फास्फोरस (P, 15) - नाइट्रोजन समूह का एक बहुसंयोजी अधातु।
हाइड्रोजन (H, 1) - आवर्त सारणी का सबसे हल्का तत्व।
RRB JE 26/05/2019 (Morning)
183
Which of the following is the first alkali metal?
निम्नलिखित में से कौन सी पहली क्षार धातु है?
✅ Correct Answer: (A)
Lithium (Li). Alkali metals (s-block elements): Alkali metals are highly reactive when compared to remaining metals because they have only a single electron in their outermost shell and can easily lose it due to their large size and less nuclear attraction force.
Hydrogen (H, 1): The lightest element in the periodic table.
It varies greatly from the alkali metals as it forms cations (H+) more reluctantly than the other alkali metals.
लिथियम (Li)। क्षार धातुएं (s-ब्लॉक तत्व): शेष धातुओं की तुलना में क्षार धातुएं अत्यधिक अभिक्रियाशील होती हैं क्योंकि उनके सबसे बाहरी कोश में केवल एक इलेक्ट्रॉन होता है और वे अपने बड़े आकार और कम परमाणु आकर्षण बल के कारण इसे आसानी से खो सकती हैं।
यह क्षार धातुओं से काफी भिन्न है क्योंकि यह अन्य क्षार धातुओं की तुलना में धनायन (H+) अधिक अनिच्छा से बनाता है।
RRB JE 26/05/2019 (Morning)
184
Which of the following is a substance abundantly available in the sea and administered in certain deficiency diseases?
निम्नलिखित में से कौन सा पदार्थ समुद्र में प्रचुर मात्रा में उपलब्ध है और कुछ कमी वाले रोगों में दिया जाता है?
✅ Correct Answer: (C)
Iodine (I) - It is used to treat Goitre.
The body needs iodine to make thyroid hormones.
Iodine is a nonmetal which is lustrous.
Its Atomic number (53) belongs to the Halogen group.
Some halogens and their state at room temperature: Solid - Iodine, Astatine; Liquid - Bromine; Gas - Fluorine, Chlorine.
आयोडीन (I) - इसका उपयोग घेंघा (Goitre) के इलाज के लिए किया जाता है।
थायराइड हार्मोन बनाने के लिए शरीर को आयोडीन की जरूरत होती है।
आयोडीन एक अधातु है जो चमकदार होती है।
इसका परमाणु क्रमांक (53) हैलोजन समूह से संबंधित है।
कुछ हैलोजन और कमरे के तापमान पर उनकी स्थिति: ठोस - आयोडीन, एस्टैटीन; तरल - ब्रोमीन; गैस - फ्लोरीन, क्लोरीन।
RRB JE 26/05/2019 (Afternoon)
185
Beryllium is very similar to:
बेरिलियम किसके बहुत समान है:
✅ Correct Answer: (A)
Aluminium (Al). In the periodic table the elements which are in diagonal relationship with Beryllium (Be) are Magnesium (Mg) and Aluminum (Al).
Not only shining other properties like color, hardness, reaction with water and reaction with oxygen are also the same.
Some other elements: Lithium (Li, Atomic number - 3), Radon (Rn, Atomic number - 86), Zinc (Zn, Atomic Number - 30).
एल्यूमिनियम (Al)।
आवर्त सारणी में जो तत्व बेरिलियम (Be) के साथ विकर्ण संबंध (diagonal relationship) में हैं वे मैग्नीशियम (Mg) और एल्यूमिनियम (Al) हैं।
न केवल चमक बल्कि रंग, कठोरता, पानी के साथ अभिक्रिया और ऑक्सीजन के साथ अभिक्रिया जैसे अन्य गुण भी समान हैं।
कुछ अन्य तत्व: लिथियम (Li, परमाणु क्रमांक - 3), रेडॉन (Rn, परमाणु क्रमांक - 86), जिंक (Zn, परमाणु क्रमांक - 30)।
RRB JE 26/05/2019 (Afternoon)
186
Which of these is a trace element?
इनमें से कौन एक सूक्ष्म तत्व (trace element) है?
✅ Correct Answer: (B)
Manganese (Mn, Atomic number - 25).
Trace element (Microminerals) - Elements whose concentration is lower than thousand (1000) parts per million or 0.1% of the original or parent rock composition.
Which of the following exhibits maximum number of valence electrons?
निम्नलिखित में से कौन संयोजी इलेक्ट्रॉनों (valence electrons) की अधिकतम संख्या प्रदर्शित करता है?
✅ Correct Answer: (B)
Phosphorus (P). Valence electrons: The electrons present in the outermost shell of an atom.
An outermost-shell, which had eight electrons was said to possess an octet.
Valency - The number of electrons gained, lost or shared so as to make the octet of electrons in the outermost shell, gives directly the combining capacity of the element.
Aluminum (Al) - 3 valence electrons.
Silicon (Si) - 4 valence electrons.
Sodium (Na) - 1 valence electron.
फास्फोरस (P)। संयोजी इलेक्ट्रॉन: किसी परमाणु के सबसे बाहरी कोश में मौजूद इलेक्ट्रॉन।
एक सबसे बाहरी कोश, जिसमें आठ इलेक्ट्रॉन थे, उसे एक अष्टक (octet) कहा गया था।
संयोजकता - सबसे बाहरी कोश में इलेक्ट्रॉनों का अष्टक बनाने के लिए प्राप्त किए गए, खोए गए या साझा किए गए इलेक्ट्रॉनों की संख्या, सीधे तत्व की संयोजन क्षमता देती है।
एल्यूमिनियम (Al) - 3 संयोजी इलेक्ट्रॉन।
सिलिकॉन (Si) - 4 संयोजी इलेक्ट्रॉन।
सोडियम (Na) - 1 संयोजी इलेक्ट्रॉन।
फास्फोरस (P) - 5 संयोजी इलेक्ट्रॉन।
RRB JE 27/05/2019 (Afternoon)
188
Which of the following is diatomic?
निम्नलिखित में से कौन द्विपरमाण्विक (diatomic) है?
✅ Correct Answer: (C)
Fluorine (F). Atomicity - Number of atoms present in a molecule of elements.
It can be Monatomic elements (single atom) - Helium (He), Neon (Ne), Argon (Ar), Xenon (Xe).
Diatomic elements (Two atoms of same element) - Hydrogen (H2), Oxygen (O2), Fluorine (F2), Chlorine (Cl2).
Polyatomic elements (More than 2 atoms bonded by covalent bond) - Selenium (Se), Sulphur (S) and Phosphorus (P).
फ्लोरीन (F)। परमाण्विकता - तत्वों के एक अणु में मौजूद परमाणुओं की संख्या।
यह एकपरमाण्विक तत्व (एकल परमाणु) हो सकते हैं - हीलियम (He), नियॉन (Ne), आर्गन (Ar), ज़ेनॉन (Xe)।
द्विपरमाण्विक तत्व (एक ही तत्व के दो परमाणु) - हाइड्रोजन (H2), ऑक्सीजन (O2), फ्लोरीन (F2), क्लोरीन (Cl2)।
बहुपरमाण्विक तत्व (सहसंयोजक बंधन द्वारा बंधे 2 से अधिक परमाणु) - सेलेनियम (Se), सल्फर (S) और फास्फोरस (P)।
RRB JE 27/05/2019 (Evening)
189
The ionization potential of nitrogen is ______.
नाइट्रोजन का आयनीकरण विभव (ionization potential) ______ है।
✅ Correct Answer: (B)
Greater than that of oxygen.
Ionization energy: The amount of energy required to remove an electron from an isolated atom or molecule.
Nitrogen has higher ionization energy than Oxygen because it has a stable half-filled electronic configuration. 7N - (1s)^2(2s)^2(2px)^1(2py)^1(2pz) and 8O - (1s)^2(2s)^2(2px)^2(2py)^1(2pz)^1.
ऑक्सीजन से अधिक।
आयनीकरण ऊर्जा: किसी पृथक परमाणु या अणु से एक इलेक्ट्रॉन को निकालने के लिए आवश्यक ऊर्जा की मात्रा।
नाइट्रोजन की आयनीकरण ऊर्जा ऑक्सीजन की तुलना में अधिक होती है क्योंकि इसमें एक स्थिर आधा भरा हुआ इलेक्ट्रॉनिक विन्यास होता है।
7N - (1s)^2(2s)^2(2px)^1(2py)^1(2pz) और 8O - (1s)^2(2s)^2(2px)^2(2py)^1(2pz)^1।
RRB JE 28/05/2019 (Afternoon)
190
Which of the following has been designated by scientists as the thinnest substances in the world?
निम्नलिखित में से किसे वैज्ञानिकों द्वारा दुनिया के सबसे पतले पदार्थ के रूप में नामित किया गया है?
✅ Correct Answer: (A)
Graphene - It is a single-atomic-layer of carbon atoms arranged in a hexagonal lattice.
Fullerene is an allotrope of carbon wherein its molecules consist of carbon atoms that are connected by single and double bonds.
Silicon is the most abundant electropositive element in Earth's crust.
It's a metalloid with a marked metallic luster and very brittle.
Quartz is a hard, crystalline mineral composed of silica (Silicon dioxide).
ग्राफीन - यह एक षट्कोणीय जालक (hexagonal lattice) में व्यवस्थित कार्बन परमाणुओं की एकल-परमाणु-परत है।
फुलरीन कार्बन का एक अपररूप है जिसमें इसके अणु कार्बन परमाणुओं से बने होते हैं जो एकल और दोहरे बंधनों से जुड़े होते हैं।
सिलिकॉन पृथ्वी की पपड़ी में सबसे प्रचुर मात्रा में विद्युत धनात्मक तत्व है।
यह एक स्पष्ट धात्विक चमक वाला और बहुत भंगुर उपधातु है।
क्वार्ट्ज सिलिका (सिलिकॉन डाइऑक्साइड) से बना एक कठोर, क्रिस्टलीय खनिज है।
RRB JE 29/05/2019 (Afternoon)
191
Which of the alkali metals is the smallest in size?
कौन सी क्षार धातु आकार में सबसे छोटी है?
✅ Correct Answer: (B)
Lithium (Li) - It is a soft, silvery-white, metal that heads group 1, the alkali metals group, of the periodic table of the elements.
It reacts vigorously with water.
It is the lightest metal, with a density about half that of water.
It is the least dense solid element.
A highly reactive and inflammable element.
The size of the atoms of an element increases as we go down the group.
The atomic size tends to decrease across a period from left to right.
लिथियम (Li) - यह एक नरम, चांदी जैसी सफेद धातु है जो तत्वों की आवर्त सारणी के क्षार धातु समूह, समूह 1 का प्रमुख है।
यह पानी के साथ तीव्रता से अभिक्रिया करता है।
यह सबसे हल्की धातु है, जिसका घनत्व पानी के घनत्व का लगभग आधा है।
यह सबसे कम सघन ठोस तत्व है।
अत्यधिक अभिक्रियाशील और ज्वलनशील तत्व।
जैसे-जैसे हम समूह में नीचे जाते हैं, किसी तत्व के परमाणुओं का आकार बढ़ता जाता है।
बाएँ से दाएँ एक आवर्त में परमाणु का आकार घटता जाता है।
RRB JE 29/05/2019 (Afternoon)
192
In the alumino thermic process, the role of Al is_______.
एल्युमिनो थर्मिक प्रक्रिया में, Al की भूमिका _______ है।
✅ Correct Answer: (A)
Reducing agent. Aluminothermic reactions are high-temperature exothermic chemical processes.
This procedure is used to make Ferrous alloys in the industry.
Reducing agents reduces others while itself gets oxidized by losing electrons.
An oxidizing agent is a substance that causes oxidation by accepting electrons.
Hydrogenation - A chemical reaction between molecular hydrogen (H2) and another compound or element, usually in the presence of a catalyst such as nickel, palladium or platinum.
अपचायक (Reducing agent)।
एल्यूमिनोथर्मिक प्रतिक्रियाएं उच्च तापमान वाली ऊष्माक्षेपी रासायनिक प्रक्रियाएं हैं।
इस प्रक्रिया का उपयोग उद्योग में लौह मिश्र धातु बनाने के लिए किया जाता है।
अपचायक दूसरों को अपचयित करते हैं जबकि इलेक्ट्रॉन खोकर स्वयं ऑक्सीकृत हो जाते हैं।
ऑक्सीकारक वह पदार्थ है जो इलेक्ट्रॉन ग्रहण करके ऑक्सीकरण का कारण बनता है।
हाइड्रोजनीकरण - आणविक हाइड्रोजन (H2) और किसी अन्य यौगिक या तत्व के बीच एक रासायनिक अभिक्रिया, आमतौर पर निकल, पैलेडियम या प्लैटिनम जैसे उत्प्रेरक की उपस्थिति में।
RRB JE 30/05/2019 (Evening)
193
Which of the following metallic elements is denser than water?
निम्नलिखित में से कौन सा धात्विक तत्व पानी से अधिक सघन है?
✅ Correct Answer: (B)
Calcium has a density of 1.55 g/cm^3 which is more than water.
The density of water is the weight of the water per its unit volume.
Density of water - 1g/cm^3.
All metals on the periodic table are denser than water except - Lithium - 0.534 g/cm^3, Potassium - 0.862 g/cm^3 and Sodium - 0.971 g/cm^3.
Objects which are less dense than water will float on it while the denser objects will sink in water.
कैल्शियम का घनत्व 1.55 g/cm^3 है जो पानी से अधिक है।
पानी का घनत्व प्रति इकाई आयतन पानी का वजन है।
पानी का घनत्व - 1g/cm^3।
आवर्त सारणी में सभी धातुएं पानी की तुलना में अधिक सघन हैं सिवाय - लिथियम - 0.534 g/cm^3, पोटेशियम - 0.862 g/cm^3 और सोडियम - 0.971 g/cm^3।
जो वस्तुएं पानी से कम सघन होती हैं वे उस पर तैरेंगी जबकि सघन वस्तुएं पानी में डूब जाएंगी।
RRB JE 31/05/2019 (Evening)
194
The atomic radius of potassium is __________ that of sodium.
पोटेशियम की परमाणु त्रिज्या सोडियम की तुलना में __________ है।
✅ Correct Answer: (B)
Greater than. Atomic Radius - Total distance from an atom's nucleus to the outermost shell containing electrons.
Due to the addition of electrons to the same shell in all atoms, the atomic radius decreases on moving from left to right across the period and increases on going top to bottom across groups in a periodic table.
Group 1A (or IA) of the periodic table are the Alkali metals: Hydrogen (H), Lithium (Li), Sodium (Na), Potassium (K), Rubidium (Rb), Cesium (Cs), and Francium (Fr).
से अधिक। परमाणु त्रिज्या - परमाणु के नाभिक से इलेक्ट्रॉन युक्त सबसे बाहरी कोश तक की कुल दूरी।
सभी परमाणुओं में एक ही कोश में इलेक्ट्रॉनों के जुड़ने के कारण, आवर्त सारणी में आवर्त में बाएं से दाएं जाने पर परमाणु त्रिज्या कम हो जाती है और समूहों में ऊपर से नीचे जाने पर बढ़ जाती है।
आवर्त सारणी का समूह 1A (या IA) क्षार धातुएं हैं: हाइड्रोजन (H), लिथियम (Li), सोडियम (Na), पोटेशियम (K), रुबिडियम (Rb), सीज़ियम (Cs), और फ्रेंशियम (Fr)।
RRB JE 31/05/2019 (Evening)
195
The element, tellurium is a -
तत्व, टेल्यूरियम एक है -
✅ Correct Answer: (D)
Metalloid - These elements are characterized by having intermediate properties of metals and non-metal.
Tellurium (Te, atomic number - 52) is a brittle, mildly toxic, rare, silver-white metalloid.
Metals are good conductors of heat and electricity, and are malleable.
Example: Gold (Au), Silver (Ag), Iron (Fe).
Non-metals are (usually) poor conductors of heat and electricity, and are not malleable or ductile.
Example: Oxygen (O), Nitrogen (N), Carbon (C).
उपधातु - इन तत्वों की विशेषता धातुओं और अधातुओं के मध्यवर्ती गुण होना है।
उदाहरण: बोरॉन (B), सिलिकॉन (Si), जर्मेनियम (Ge)।
टेल्यूरियम (Te, परमाणु क्रमांक - 52) एक भंगुर, हल्का विषैला, दुर्लभ, चांदी-सफेद उपधातु है।
धातुएं ऊष्मा और बिजली की सुचालक होती हैं, और आघातवर्ध्य होती हैं।
उदाहरण: सोना (Au), चांदी (Ag), लोहा (Fe)।
अधातुएं (आमतौर पर) ऊष्मा और बिजली की खराब सुचालक होती हैं, और आघातवर्ध्य या तन्य नहीं होती हैं।
उदाहरण: ऑक्सीजन (O), नाइट्रोजन (N), कार्बन (C)।
RRB JE 01/06/2019 (Morning)
196
Which of the following properties is NOT shown by non-metals?
निम्नलिखित में से कौन सा गुण अधातुओं द्वारा प्रदर्शित नहीं किया जाता है?
✅ Correct Answer: (B)
All the Options.
Metal - An element that can easily form positive ions called cations and tends to make metallic bonds.
Examples of metals are gold, aluminum, iron and magnesium etc. Physical Properties of Metals: Malleability, ductile, good conductor of heat and electricity.
A non metal - A chemical element that generally in a chemical reaction gains electrons when reacts with a metal.
The matter that CANNOT be broken down by chemical reactions into simpler substances is known as:
वह पदार्थ जिसे रासायनिक अभिक्रियाओं द्वारा सरल पदार्थों में नहीं तोड़ा जा सकता, कहलाता है:
✅ Correct Answer: (A)
Elements. Example - Iron (Fe), Copper (Cu).
Mixtures - a physical blend of two or more substances in which identities are retained and are blended in the form of solutions, suspensions, or colloids.
Example - Smog, Blood.
Compounds - substance formed when two or more chemical elements are chemically bonded together.
Example - Water.
A pure substance - A substance in which all the particles present are of the same chemical nature.
तत्व। उदाहरण - लोहा (Fe), तांबा (Cu)।
मिश्रण - दो या दो से अधिक पदार्थों का भौतिक मिश्रण जिसमें पहचान बरकरार रहती है और समाधान, निलंबन या कोलाइड के रूप में मिश्रित होते हैं।
उदाहरण - स्मॉग, रक्त।
यौगिक - ऐसा पदार्थ जो तब बनता है जब दो या दो से अधिक रासायनिक तत्व रासायनिक रूप से एक साथ बंधे होते हैं।
उदाहरण - पानी।
शुद्ध पदार्थ - वह पदार्थ जिसमें उपस्थित सभी कणों की रासायनिक प्रकृति एक समान होती है।
RRB JE 02/06/2019 (Morning)
198
Which of the following alloys contains mercury as one of its constituents?
निम्नलिखित में से किस मिश्र धातु में पारा इसके घटकों में से एक के रूप में होता है?
✅ Correct Answer: (D)
Zinc Amalgam is an alloy of Zinc (Zn) and Mercury (Hg).
Alloys of mercury are called Amalgam.
Alnico - magnetic alloy of Aluminium (Al), Cobalt (Co), Nickel (Ni) and some amount of copper (Cu).
Solder - Fusible metal alloy made up Lead (Pb) and Tin (Sn).
Stainless steel - Corrosion-resistant alloy of Iron (Fe), chromium (Cr) and Nickel (Ni).
जिंक अमलगम जिंक (Zn) और पारा (Hg) का एक मिश्र धातु है।
पारे की मिश्र धातुओं को अमलगम कहा जाता है।
एलनिको - एल्युमिनियम (Al), कोबाल्ट (Co), निकेल (Ni) और कुछ मात्रा में तांबे (Cu) का चुंबकीय मिश्र धातु।
सोल्डर - सीसा (Pb) और टिन (Sn) से बना फ्यूज़िबल धातु मिश्र धातु।
स्टेनलेस स्टील - लोहा (Fe), क्रोमियम (Cr) और निकेल (Ni) का संक्षारण प्रतिरोधी मिश्र धातु।
RRB JE 26/06/2019 (Evening)
199
The element with atomic number 14 is hard and forms acidic oxide and a covalent halide. To which of the following categories does the element belong?
परमाणु क्रमांक 14 वाला तत्व कठोर है और एक अम्लीय ऑक्साइड और सहसंयोजक हैलाइड बनाता है। यह तत्व निम्नलिखित में से किस श्रेणी का है?
✅ Correct Answer: (B)
Metalloids are elements that have properties of both metals and non-metals.
They have intermediate properties of electrical conductivity, thermal conductivity, and reactivity.
Silicon (Si): Atomic Number = 14.
It is a hard and brittle solid, which makes it a typical characteristic of a non-metal.
It also conducts electricity and has a metallic luster, which makes it similar to a metal.
It forms acidic oxides like SiO2 (silicon dioxide) and covalent halides like SiCl4 (silicon tetrachloride), which are typical properties of a non-metal.
उपधातु वे तत्व हैं जिनमें धातु और अधातु दोनों के गुण होते हैं।
उनमें विद्युत चालकता, तापीय चालकता और अभिक्रियाशीलता के मध्यवर्ती गुण होते हैं।
सिलिकॉन (Si): परमाणु क्रमांक = 14।
यह एक कठोर और भंगुर ठोस है, जो इसे एक अधातु की विशिष्ट विशेषता बनाता है।
यह बिजली का संचालन भी करता है और इसमें धात्विक चमक होती है, जो इसे धातु के समान बनाती है।
यह SiO2 (सिलिकॉन डाइऑक्साइड) जैसे अम्लीय ऑक्साइड और SiCl4 (सिलिकॉन टेट्राक्लोराइड) जैसे सहसंयोजक हलाइड बनाता है, जो एक अधातु के विशिष्ट गुण हैं।
RRB JE 28/06/2019 (Evening)
200
Identify the metal having minimum thermal conductivity.
न्यूनतम तापीय चालकता (thermal conductivity) वाली धातु को पहचानें।
✅ Correct Answer: (B)
Mercury (symbol - Hg, liquid at room temperature).
Thermal conductivity - the rate at which heat is transferred by conduction through a unit cross-section area of a material, when a temperature gradient exists perpendicular to the area.
Diamond (hardest allotrope of carbon) has high thermal conductivity with conductivity levels 5 times better than copper.
पारा (प्रतीक - Hg, कमरे के तापमान पर तरल)।
तापीय चालकता - वह दर जिस पर किसी पदार्थ के इकाई क्रॉस-सेक्शन क्षेत्र के माध्यम से चालन द्वारा ऊष्मा स्थानांतरित की जाती है, जब क्षेत्र के लंबवत तापमान प्रवणता मौजूद होती है।
हीरे (कार्बन का सबसे कठोर अपररूप) में तांबे की तुलना में 5 गुना बेहतर चालकता के साथ उच्च तापीय चालकता होती है।
RRB ALP Tier-II (21/01/2019) Evening
201
Which of the following metals reacts with steam to form metal oxide and hydrogen?
निम्नलिखित में से कौन सी धातु भाप के साथ अभिक्रिया करके धातु ऑक्साइड और हाइड्रोजन बनाती है?
✅ Correct Answer: (D)
Aluminium (Al) - Atomic number 13.
Discovered by Hans Oersted in 1825.
Chemical Reaction: 2Al + 3H2O → Al2O3 + 3H2.
Some metals which react with steam: Magnesium: Mg + 2H2O → Mg(OH)2 + H2.
Zinc: Zn + H2O → ZnO + H2.
Iron: 3Fe + 4H2O → Fe3O4 + 4H2.
एल्यूमिनियम (Al) - परमाणु क्रमांक 13।
1825 में हंस ओर्स्टेड द्वारा खोजा गया।
रासायनिक अभिक्रिया: 2Al + 3H2O → Al2O3 + 3H2।
कुछ धातुएँ जो भाप से अभिक्रिया करती हैं: मैग्नीशियम: Mg + 2H2O → Mg(OH)2 + H2।
जिंक: Zn + H2O → ZnO + H2।
लोहा: 3Fe + 4H2O → Fe3O4 + 4H2।
RRB Group D 17/09/2018 (Morning)
202
Which of the following can exist in solid, liquid and gaseous forms?
निम्नलिखित में से कौन ठोस, तरल और गैसीय रूप में मौजूद हो सकता है?
✅ Correct Answer: (C)
Non-metals are (usually) poor conductors of heat and electricity, and are not malleable or ductile; many of the elemental nonmetals are gases at room temperature, while others are liquids and others are solids.
Metals are good conductors of heat and electricity, and are malleable (they can be hammered into sheets) and ductile (they can be drawn into wire).
Most of the metals are solids at room temperature, with a characteristic silvery shine (except for mercury, which is a liquid).
अधातुएं (आमतौर पर) ऊष्मा और बिजली की खराब सुचालक होती हैं, और आघातवर्ध्य या तन्य नहीं होती हैं; कई मौलिक अधातुएं कमरे के तापमान पर गैसें होती हैं, जबकि अन्य तरल होती हैं और अन्य ठोस होती हैं।
धातुएं ऊष्मा और बिजली की सुचालक होती हैं, और आघातवर्ध्य (इन्हें चादरों में पीटा जा सकता है) और तन्य (इन्हें तार में खींचा जा सकता है) होती हैं।
अधिकांश धातुएँ कमरे के तापमान पर ठोस होती हैं, जिनमें एक विशिष्ट चांदी जैसी चमक होती है (पारे को छोड़कर, जो एक तरल है)।
RRB Group D 17/09/2018 (Morning)
203
Choose the correct order of electrical resistivity of metals.
धातुओं की विद्युत प्रतिरोधकता (electrical resistivity) का सही क्रम चुनें।
✅ Correct Answer: (B)
Hg (Mercury) > Ni (Nickel) > W (Tungsten) > Ag (Silver).
Electrical resistivity is the measure of the ability of a material to oppose the flow of current.
It is the reciprocal of electrical conductivity.
SI Unit - Ohm-metre (Ohm-m).
Elements and their resistivity: Silver (1.60 × 10^-8), Tungsten (5.20 × 10^-8), Nickel (6.84 × 10^-8), Mercury (94 × 10^-8).
Hg (पारा) > Ni (निकेल) > W (टंगस्टन) > Ag (चांदी)।
विद्युत प्रतिरोधकता किसी पदार्थ की धारा के प्रवाह का विरोध करने की क्षमता का माप है।
यह विद्युत चालकता का व्युत्क्रमानुपाती (reciprocal) है।
एसआई इकाई - ओम-मीटर (Ohm-m)।
तत्व और उनकी प्रतिरोधकता: चांदी (1.60 × 10^-8), टंगस्टन (5.20 × 10^-8), निकेल (6.84 × 10^-8), पारा (94 × 10^-8)।
RRB Group D 17/09/2018 (Afternoon)
204
Which property of metals enables production of metallic foils?
धातुओं का कौन सा गुण धात्विक पन्नी (metallic foils) के उत्पादन को सक्षम बनाता है?
✅ Correct Answer: (A)
Malleability - It is the property of metals by which they can be beaten into thin sheets.
Ductility - Property of metal associated with the ability to be stretched into wire without breaking.
Conductivity - Capability of water to pass electrical flow.
Sonority - The ability of a material to produce a ringing sound when struck.
आघातवर्ध्यता - यह धातुओं का वह गुण है जिसके द्वारा उन्हें पीटकर पतली चादर बनाया जा सकता है।
तन्यता - धातु का वह गुण जो बिना टूटे तार में खिंचने की क्षमता से जुड़ा है।
चालकता - विद्युत प्रवाह को पारित करने की क्षमता।
ध्वन्यात्मकता - टकराने पर बजने वाली ध्वनि उत्पन्न करने की किसी पदार्थ की क्षमता।
RRB Group D 17/09/2018 (Afternoon)
205
Constantan is alloyed from ______ metals.
कॉन्स्टेंटन (Constantan) किन धातुओं की मिश्र धातु है?
✅ Correct Answer: (D)
Cu (Copper), Ni (Nickel).
Constantan (Eureka): It has high ductility, high specific heat resistance and low temperature coefficient of resistance.
Copper (Cu). Metals are good conductors of heat and electricity, and are malleable (they can be hammered into sheets) and ductile (they can be drawn into wire).
Most of the metals are solids at room temperature, with a characteristic silvery shine (except for mercury, which is a liquid).
Nonmetals are (usually) poor conductors of heat and electricity, and are not malleable or ductile.
तांबा (Cu)। धातुएं ऊष्मा और बिजली की सुचालक होती हैं, और आघातवर्ध्य (उन्हें चादरों में पीटा जा सकता है) और तन्य (उन्हें तार में खींचा जा सकता है) होती हैं।
अधिकांश धातुएँ कमरे के तापमान पर ठोस होती हैं, जिनमें एक विशिष्ट चांदी जैसी चमक होती है (पारे को छोड़कर, जो एक तरल है)।
अधातुएं (आमतौर पर) ऊष्मा और बिजली की खराब सुचालक होती हैं, और आघातवर्ध्य या तन्य नहीं होती हैं।
RRB Group D 18/09/2018 (Morning)
207
Which of the following metals is in liquid state at room temperature?
निम्नलिखित में से कौन सी धातु कमरे के तापमान पर तरल अवस्था में होती है?
✅ Correct Answer: (A)
Mercury. All metals except mercury exist as solids at room temperature.
Metals have high melting points but gallium and caesium have very low melting points.
These two metals will melt if we keep them on our palm.
Iodine is non-metal but it is lustrous.
Alkali metals (lithium, sodium, potassium) are so soft that they can be cut with a knife.
They have low densities and low melting points.
पारा। पारे को छोड़कर सभी धातुएँ कमरे के तापमान पर ठोस के रूप में मौजूद होती हैं।
धातुओं का गलनांक उच्च होता है लेकिन गैलियम और सीज़ियम का गलनांक बहुत कम होता है।
अगर हम इन दोनों धातुओं को अपनी हथेली पर रखेंगे तो ये पिघल जाएंगी।
आयोडीन अधातु है लेकिन यह चमकदार है।
क्षार धातुएँ (लिथियम, सोडियम, पोटेशियम) इतनी नरम होती हैं कि इन्हें चाकू से काटा जा सकता है।
उनका घनत्व कम होता है और गलनांक कम होता है।
RRB Group D 19/09/2018 (Morning)
208
The melting point of tungsten is ________.
टंगस्टन का गलनांक ________ है।
✅ Correct Answer: (C)
3,380°C. Tungsten is used almost exclusively for filaments of electric bulbs, whereas copper and aluminum are generally used for electrical transmission lines.
Melting points of some other metals: Silicon (1414°C), mild steel (1400°C), copper (1084°C), aluminum (660°C), Brass (930°C), Iron (1535°C), gold (1064°C), silver (961°C).
3,380°C। टंगस्टन का उपयोग लगभग विशेष रूप से बिजली के बल्बों के फिलामेंट के लिए किया जाता है, जबकि तांबे और एल्यूमीनियम का उपयोग आमतौर पर विद्युत संचरण लाइनों के लिए किया जाता है।
कुछ अन्य धातुओं के गलनांक: सिलिकॉन (1414°C), हल्का स्टील (1400°C), तांबा (1084°C), एल्युमीनियम (660°C), पीतल (930°C), लोहा (1535°C), सोना (1064°C), चांदी (961°C)।
RRB Group D 19/09/2018 (Morning)
209
Which of the following does not oxidize (burn) easily at high temperatures?
निम्नलिखित में से कौन उच्च तापमान पर आसानी से ऑक्सीकृत (जलता) नहीं होता है?
✅ Correct Answer: (D)
Alloys do not oxidize readily at high temperatures.
Alloy is a homogenous mixture of two or more metals; or a metal and a non-metal.
Therefore, conductors of electric heating devices, such as toasters and electric irons, are made of an alloy rather than pure metal.
मिश्र धातु उच्च तापमान पर आसानी से ऑक्सीकृत नहीं होती हैं।
मिश्र धातु दो या दो से अधिक धातुओं का सजातीय मिश्रण है; या एक धातु और एक अधातु।
इसलिए, इलेक्ट्रिक हीटिंग उपकरणों, जैसे टोस्टर और इलेक्ट्रिक आयरन के कंडक्टर शुद्ध धातु के बजाय मिश्र धातु से बने होते हैं।
RRB Group D 19/09/2018 (Morning)
210
Solder is an alloy of ___________.
सोल्डर ___________ की मिश्र धातु है।
✅ Correct Answer: (D)
Pb and Sn. Solder has a low melting point and is used for welding electrical wires together.
Soldering is a process in which two or more metal items are joined together by melting and flowing a filler metal into the join.
Pb और Sn। सोल्डर का गलनांक कम होता है और इसका उपयोग बिजली के तारों को एक साथ वेल्डिंग करने के लिए किया जाता है।
सोल्डरिंग एक प्रक्रिया है जिसमें भराव धातु (filler metal) को पिघलाकर और जोड़ में प्रवाहित करके दो या दो से अधिक धातु की वस्तुओं को एक साथ जोड़ा जाता है।
RRB Group D 19/09/2018 (Afternoon)
211
_______ alloy contains tin.
_______ मिश्र धातु में टिन होता है।
✅ Correct Answer: (B)
Solder is an alloy of Lead and Tin.
Tin-Lead solders are the largest single group and the most widely used of the soldering alloys.
Soldering is a process in which two or more metal items are joined together by melting and flowing a filler metal into the joint.
सोल्डर लेड और टिन का मिश्र धातु है।
टिन-लेड सोल्डर सबसे बड़ा एकल समूह है और सबसे व्यापक रूप से उपयोग किया जाने वाला सोल्डरिंग मिश्र धातु है।
सोल्डरिंग एक प्रक्रिया है जिसमें भराव धातु को पिघलाकर और जोड़ में प्रवाहित करके दो या दो से अधिक धातु की वस्तुओं को एक साथ जोड़ा जाता है।
RRB Group D 20/09/2018 (Morning)
212
Sodium metal is stored in _______.
सोडियम धातु को ______ में संग्रहित किया जाता है।
✅ Correct Answer: (D)
Kerosene. Different metals show different reactivities towards oxygen.
Metals such as potassium and sodium react so vigorously that they catch fire if kept in the open.
Hence, to protect them and to prevent accidental fires, they are kept immersed in kerosene oil.
At ordinary temperature, the surfaces of metals such as magnesium, aluminum, zinc, lead, etc., are covered with a thin layer of oxide.
The protective oxide layer prevents the metal from further oxidation.
केरोसिन (मिट्टी का तेल)।
विभिन्न धातुएँ ऑक्सीजन के प्रति भिन्न-भिन्न अभिक्रियाशीलता दर्शाती हैं।
पोटेशियम और सोडियम जैसी धातुएं इतनी तीव्रता से अभिक्रिया करती हैं कि खुले में रखने पर वे आग पकड़ लेती हैं।
इसलिए, उन्हें सुरक्षित रखने और आकस्मिक आग से बचाने के लिए उन्हें मिट्टी के तेल में डुबो कर रखा जाता है।
सामान्य तापमान पर मैग्नीशियम, एल्युमीनियम, जिंक, लेड आदि धातुओं की सतह ऑक्साइड की पतली परत से ढकी होती है।
सुरक्षात्मक ऑक्साइड परत धातु को आगे ऑक्सीकरण से बचाती है।
RRB Group D 23/09/2018 (Morning)
213
In the Process of Galvanisation, which metal is coated over iron?
गैल्वनाइजेशन की प्रक्रिया में लोहे पर किस धातु की परत चढ़ाई जाती है?
✅ Correct Answer: (D)
Zinc. Galvanisation - The process of applying a protective zinc coating to iron or steel, to prevent rusting.
Other methods to prevent rusting of iron - Painting, Oiling, Greasing.
Rusting - The interaction of Iron with air and water produces rust.
Alloying: It is the method of improving the properties of a metal by mixing the metal with another metal or non-metal.
जिंक। गैल्वनाइजेशन - जंग लगने से रोकने के लिए लोहे या स्टील पर सुरक्षात्मक जिंक कोटिंग लगाने की प्रक्रिया।
लोहे को जंग से बचाने के अन्य तरीके - पेंटिंग, ऑयलिंग, ग्रीसिंग।
जंग लगना (Rusting) - हवा और पानी के साथ लोहे की परस्पर क्रिया से जंग उत्पन्न होती है।
मिश्रधातु बनाना: यह धातु को किसी अन्य धातु या अधातु के साथ मिलाकर धातु के गुणों में सुधार करने की विधि है।
RRB Group D 23/09/2018 (Afternoon)
214
________ is the most ductile metal.
________ सबसे अधिक तन्य धातु है।
✅ Correct Answer: (A)
Gold. Ductility: The property of metal by which it can be drawn into wires.
Other Examples - Copper, Pure Platinum.
Malleability: The property of metals by which they can be beaten into thin sheets.
Example - Steel, Aluminium, Copper, Silver.
सोना। तन्यता: धातु का वह गुण जिसके द्वारा उसे तारों में खींचा जा सकता है।
अन्य उदाहरण - तांबा, शुद्ध प्लैटिनम।
आघातवर्ध्यता: धातुओं का वह गुण जिसके द्वारा उन्हें पीटकर पतली चादर बनाया जा सकता है।
उदाहरण - स्टील, एल्यूमिनियम, तांबा, चांदी।
RRB Group D 23/09/2018 (Evening)
215
_______ metal is used to make the filament of a light bulb.
लाइट बल्ब का फिलामेंट बनाने के लिए _______ धातु का उपयोग किया जाता है।
✅ Correct Answer: (D)
Tungsten. It is because the melting point of tungsten is very high.
Nichrome is used to make the coils used in water heaters.
It is also used in heating elements such as hair dryers, toasters, and ovens.
टंगस्टन। ऐसा इसलिए है क्योंकि टंगस्टन का गलनांक बहुत अधिक होता है।
वॉटर हीटर में प्रयुक्त कॉइल बनाने के लिए नाइक्रोम का उपयोग किया जाता है।
इसका उपयोग हेयर ड्रायर, टोस्टर और ओवन जैसे हीटिंग तत्वों में भी किया जाता है।
RRB Group D 24/09/2018 (Morning)
216
Bronze is:
कांस्य (Bronze) है:
✅ Correct Answer: (B)
Alloy. Bronze is an alloy of Copper (Cu) and tin (Sn).
Examples of some alloys: Brass - Copper and Zinc.
Steel - Iron and carbon.
Stainless steel - Iron, Carbon, Chromium and Nickel.
Solder - Tin and Lead.
German Silver - Copper, Nickel and Zinc.
Gunmetal - Copper, Tin and Zinc.
मिश्र धातु। कांस्य तांबे (Cu) और टिन (Sn) का मिश्र धातु है।
कुछ मिश्र धातुओं के उदाहरण: पीतल - तांबा और जस्ता।
स्टील - लोहा और कार्बन।
स्टेनलेस स्टील - लोहा, कार्बन, क्रोमियम और निकल।
सोल्डर - टिन और लेड।
जर्मन सिल्वर - तांबा, निकल और जिंक।
गनमेटल - तांबा, टिन और जिंक।
RRB Group D 27/09/2018 (Afternoon)
217
_________ metal is extracted only by electrolysis.
_________ धातु को केवल विद्युत अपघटन (electrolysis) द्वारा निकाला जाता है।
✅ Correct Answer: (A)
Al (Aluminium) is extracted by the electrolysis of alumina mixed with molten cryolite.
This process is known as the Hoope's process.
In this process, the impure aluminium is collected over the anode and the pure aluminium is obtained on the cathode with a salt of the metal being the electrolyte.
Al (एल्यूमिनियम) को पिघले हुए क्रायोलाइट मिश्रित एल्यूमिना के विद्युत अपघटन द्वारा निकाला जाता है।
इस प्रक्रिया को हूप की प्रक्रिया (Hoope's process) के रूप में जाना जाता है।
इस प्रक्रिया में, अशुद्ध एल्यूमीनियम एनोड पर एकत्र होता है और शुद्ध एल्यूमीनियम कैथोड पर धातु के नमक के इलेक्ट्रोलाइट होने के साथ प्राप्त होता है।
RRB Group D 28/09/2018 (Evening)
218
Which of the following non-metals is shiny?
निम्नलिखित में से कौन सी अधातु चमकदार है?
✅ Correct Answer: (D)
Iodine. Non-metals have a dull appearance.
This is a physical property of non-metals.
But iodine is an exception.
It occurs as a lustrous/shiny violet crystals.
आयोडीन। अधातुएँ दिखने में फीकी (dull) होती हैं।
यह अधातुओं का भौतिक गुण है।
लेकिन आयोडीन एक अपवाद है।
यह चमकदार/चमकीले बैंगनी क्रिस्टल के रूप में होता है।
RRB Group D 01/10/2018 (Morning)
219
Aluminium metal is extracted only by:
एल्यूमिनियम धातु केवल किसके द्वारा निकाली जाती है:
✅ Correct Answer: (A)
Electrolysis. Aluminium is extracted by the electrolysis of alumina mixed with molten cryolite.
This process is known as the Hoope's process.
Through this process, the impure aluminium is collected over the anode and the pure aluminium is obtained on the cathode with a salt of the metal being the electrolyte.
इलेक्ट्रोलिसिस। एल्युमीनियम को पिघले हुए क्रायोलाइट मिश्रित एल्यूमिना के इलेक्ट्रोलिसिस द्वारा निकाला जाता है।
इस प्रक्रिया को हूप की प्रक्रिया के रूप में जाना जाता है।
इस प्रक्रिया के माध्यम से अशुद्ध एल्युमीनियम एनोड के ऊपर एकत्रित हो जाता है और शुद्ध एल्युमीनियम कैथोड पर प्राप्त होता है, धातु का एक नमक इलेक्ट्रोलाइट होता है।
RRB Group D 01/10/2018 (Evening)
220
Which of the following statements is incorrect?
निम्नलिखित में से कौन सा कथन गलत है?
✅ Correct Answer: (C)
Non-metals form cations.
Non-metal oxides are acidic in nature while metal oxides are basic in nature.
Metals lose electrons to form cations (positive charge) whereas non-metals gain electrons to form anions (negative charge).
Metals are good conductors of electricity because of a lot of free electrons, while non-metals are bad conductors of electricity because they have no free electrons.
अधातुएँ धनायन बनाती हैं।
अधातु के ऑक्साइड प्रकृति में अम्लीय होते हैं जबकि धातु के ऑक्साइड प्रकृति में क्षारीय होते हैं।
धातुएँ धनायन (धनात्मक आवेश) बनाने के लिए इलेक्ट्रॉन खो देती हैं जबकि अधातुएँ ऋणायन (नकारात्मक आवेश) बनाने के लिए इलेक्ट्रॉन प्राप्त करती हैं।
बहुत सारे मुक्त इलेक्ट्रॉनों के कारण धातुएं बिजली की सुचालक होती हैं, जबकि अधातुएं बिजली की खराब सुचालक होती हैं क्योंकि उनमें कोई मुक्त इलेक्ट्रॉन नहीं होता है।
RRB Group D 04/10/2018 (Afternoon)
221
_______ is the most ductile metal.
_______ सबसे अधिक तन्य धातु है।
✅ Correct Answer: (C)
Au (Gold). Its Latin name is Aurum 'gold' and the atomic number is 79.
About 2 km long wire can be drawn from one gram of gold.
Ductility - The ability of metals to be drawn into thin wires.
Au (सोना)। इसका लैटिन नाम ऑरम 'सोना' है और परमाणु क्रमांक 79 है।
एक ग्राम सोने से करीब 2 किलोमीटर लंबा तार खींचा जा सकता है।
तन्यता - धातुओं की पतले तारों में खींचे जाने की क्षमता।
RRB Group D 05/10/2018 (Afternoon)
222
_______ metal reacts vigorously with cold water.
_______ धातु ठंडे पानी के साथ तीव्रता से प्रतिक्रिया करती है।
✅ Correct Answer: (D)
Na. Alkali metals (Group 1) are known to react violently and explosively with water.
This is because enough heat is given off during the exothermic reaction to ignite the H2(g).
Metals such as Sodium, Potassium react violently with cold water.
The reaction is so violent and exothermic that the evolved hydrogen immediately catches fire.
Na (सोडियम)। क्षार धातुएँ (समूह 1) पानी के साथ हिंसक और विस्फोटक प्रतिक्रिया करने के लिए जानी जाती हैं।
ऐसा इसलिए है क्योंकि ऊष्माक्षेपी अभिक्रिया के दौरान H2(g) को प्रज्वलित करने के लिए पर्याप्त गर्मी दी जाती है।
सोडियम, पोटेशियम जैसी धातुएँ ठंडे पानी के साथ हिंसक प्रतिक्रिया करती हैं।
यह प्रतिक्रिया इतनी तीव्र और ऊष्माक्षेपी है कि विकसित हाइड्रोजन तुरंत आग पकड़ लेती है।
RRB Group D 05/10/2018 (Evening)
223
What is the temperature at which a solid melts to become a liquid at atmospheric pressure called?
वायुमंडलीय दबाव पर जिस तापमान पर कोई ठोस पिघलकर तरल बन जाता है, उसे क्या कहा जाता है?
✅ Correct Answer: (B)
Melting point. The melting point is the temperature at which a substance changes state from solid to liquid at atmospheric pressure.
Latent heat of fusion - Amount of heat required to melt a unit mass of a solid at its melting point.
Boiling point - The temperature at which a liquid boils and changes into a gas at atmospheric pressure.
Latent heat - The heat released or absorbed by a substance during a change of state, such as melting or boiling.
गलनांक (Melting point)।
गलनांक वह तापमान है जिस पर कोई पदार्थ वायुमंडलीय दबाव पर ठोस से तरल अवस्था में बदल जाता है।
गलन की गुप्त ऊष्मा - किसी ठोस के इकाई द्रव्यमान को उसके गलनांक पर पिघलाने के लिए आवश्यक ऊष्मा की मात्रा।
क्वथनांक - वह तापमान जिस पर कोई तरल उबलता है और वायुमंडलीय दबाव पर गैस में बदल जाता है।
गुप्त ऊष्मा - पिघलने या उबलने जैसी अवस्था में बदलाव के दौरान किसी पदार्थ द्वारा छोड़ी या अवशोषित की गई ऊष्मा।
RRB Group D 05/10/2018 (Evening)
224
Metals are good conductors of electricity because they have many loosely bound________.
धातुएँ बिजली की सुचालक होती हैं क्योंकि उनमें कई शिथिल रूप से बंधे हुए (loosely bound) ________ होते हैं।
✅ Correct Answer: (D)
Electrons. These electrons act as charge carriers in the metallic structure, allowing electric current to flow through them.
Conductor allows current to flow easily through it.
Silver, Copper, and Aluminum are examples of good conductors of heat and electricity.
Insulators - It doesn't allow current to flow through them.
They are non-conductive because they do not possess any free charge carriers.
Examples: Glass, Wood, Plastic.
इलेक्ट्रॉन। ये इलेक्ट्रॉन धात्विक संरचना में आवेश वाहक (charge carriers) के रूप में कार्य करते हैं, जिससे उनके माध्यम से विद्युत धारा प्रवाहित होती है।
कंडक्टर अपने माध्यम से धारा को आसानी से प्रवाहित होने देता है।
चांदी, तांबा और एल्युमीनियम ऊष्मा और विद्युत के सुचालक के उदाहरण हैं।
इन्सुलेटर - यह अपने माध्यम से धारा को प्रवाहित नहीं होने देता है।
वे गैर-प्रवाहकीय हैं क्योंकि उनके पास कोई मुक्त आवेश वाहक नहीं है।
उदाहरण: कांच, लकड़ी, प्लास्टिक।
RRB Group D 05/10/2018 (Evening)
225
Which of the following electronic configurations is that of a non-metal?
निम्नलिखित में से कौन सा इलेक्ट्रॉनिक विन्यास एक अधातु का है?
✅ Correct Answer: (C)
2, 8, 5. It represents a non-metal because it ends with 5 electrons in the outermost shell.
The non-metals and metalloids exist only in the p-block of the periodic table.
2, 8, 5। यह एक अधातु को दर्शाता है क्योंकि यह सबसे बाहरी कोश में 5 इलेक्ट्रॉनों के साथ समाप्त होता है।
अधातुएँ और उपधातुएँ आवर्त सारणी के केवल p-ब्लॉक में मौजूद हैं।
RRB Group D 09/10/2018 (Afternoon)
226
Which of the following is not an electronic configuration of a non-metal?
निम्नलिखित में से कौन सा अधातु का इलेक्ट्रॉनिक विन्यास नहीं है?
✅ Correct Answer: (D)
2, 8, 4 is the electronic configuration of Silicon (Si).
Silicon is a metalloid (neither metal nor nonmetal).
It is the second most abundant element in the Earth's crust after oxygen. 2, 8, 7 is the electronic configuration of Chlorine (Atomic number = 17, and Non-metal from the Halogen family). 2, 8, 6 is the electronic configuration of Sulfur (Atomic number = 16, and Non-metal). 2, 8, 5 is the electronic configuration of Phosphorus (Atomic number = 15, and Non-metal).
2, 8, 4 सिलिकॉन (Si) का इलेक्ट्रॉनिक विन्यास है।
सिलिकॉन एक उपधातु (न धातु और न ही अधातु) है।
ऑक्सीजन के बाद पृथ्वी की पपड़ी में यह दूसरा सबसे प्रचुर तत्व है।
2, 8, 7 क्लोरीन का इलेक्ट्रॉनिक विन्यास है (परमाणु क्रमांक = 17, और हैलोजन परिवार से अधातु)।
2, 8, 6 सल्फर का इलेक्ट्रॉनिक विन्यास है (परमाणु क्रमांक = 16, और अधातु)।
2, 8, 5 फास्फोरस का इलेक्ट्रॉनिक विन्यास है (परमाणु क्रमांक = 15, और अधातु)।
RRB Group D 09/10/2018 (Evening)
227
Which of the following is the electronic configuration of a metallic element?
निम्नलिखित में से कौन सा धात्विक तत्व का इलेक्ट्रॉनिक विन्यास है?
✅ Correct Answer: (A)
2, 8, 3. The element with the electronic configuration (2, 8, 3) is Aluminum as it has the atomic number 13 and symbol Al.
The electronic configuration of an element describes how electrons are distributed in its atomic orbitals.
Electronic Configuration of the element (2, 8, 6) - Sulphur (Non-metal).
2, 8, 3। इलेक्ट्रॉनिक विन्यास (2, 8, 3) वाला तत्व एल्युमीनियम है क्योंकि इसका परमाणु क्रमांक 13 और प्रतीक Al है।
किसी तत्व का इलेक्ट्रॉनिक विन्यास यह वर्णन करता है कि इलेक्ट्रॉन उसके परमाणु कक्षाओं (orbitals) में कैसे वितरित होते हैं।
तत्व का इलेक्ट्रॉनिक विन्यास (2, 8, 6) - सल्फर (अधातु)।
इलेक्ट्रॉनिक विन्यास (2,8,4) - सिलिकॉन (अधातु)।
इलेक्ट्रॉनिक विन्यास (2,8,5) - फास्फोरस (अधातु)।
RRB Group D 10/10/2018 (Morning)
228
Which of the following has low density and low melting point?
निम्नलिखित में से किसका घनत्व कम और गलनांक कम है?
✅ Correct Answer: (A)
Na (Sodium). Properties - Soft Metal, Highly Reactive, Good Conductor, Low Density, 6th most abundant element on the Earth.
Location - first Group.
Melting and Boiling Points of other elements - Iron (Fe) - High, Copper (Cu) - high but Lower than Iron, Gold (Au) - Low melting point and High Boiling Point.
Na (सोडियम)। गुण - मुलायम धातु, अत्यधिक अभिक्रियाशील, सुचालक, कम घनत्व, पृथ्वी पर छठा सबसे प्रचुर तत्व।
स्थान - प्रथम समूह।
अन्य तत्वों के गलनांक और क्वथनांक - लोहा (Fe) - उच्च, तांबा (Cu) - उच्च लेकिन लोहे से कम, सोना (Au) - निम्न गलनांक और उच्च क्वथनांक।
RRB Group D 11/10/2018 (Morning)
229
__________ has 1 to 3 electrons in its outermost shell.
__________ के सबसे बाहरी कोश में 1 से 3 इलेक्ट्रॉन होते हैं।
✅ Correct Answer: (B)
Metal. Non-metals: These generally have 5 to 7 electrons in their valence shell and tend to form covalent bonds with other atoms.
Halogens: This specific group within the non-metals typically has 7 electrons in their valence shell.
Metalloids: These elements exhibit properties intermediate between metals and non-metals, having varying numbers of valence electrons (4 or 5).
धातु। अधातुएँ: इनके संयोजी कोश में आम तौर पर 5 से 7 इलेक्ट्रॉन होते हैं और ये अन्य परमाणुओं के साथ सहसंयोजक बंधन बनाते हैं।
हैलोजन: अधातुओं के इस विशिष्ट समूह के संयोजी कोश में आम तौर पर 7 इलेक्ट्रॉन होते हैं।
उपधातुएँ: ये तत्व धातुओं और अधातुओं के बीच मध्यवर्ती गुण प्रदर्शित करते हैं, जिनमें संयोजी इलेक्ट्रॉनों (4 या 5) की अलग-अलग संख्या होती है।
RRB Group D 11/10/2018 (Afternoon)
230
Which of the following basic elements is NOT from the class of alkali metals?
निम्नलिखित में से कौन सा मूल तत्व क्षार धातुओं के वर्ग से नहीं है?
✅ Correct Answer: (D)
Calcium (Ca). It belongs to Group 2 (IIA) in the periodic table.
It has two electrons in its outermost valence shell and tends to lose two electrons to form cations.
Therefore, it is classified as an alkaline earth metal.
Alkali metals: These belong to Group 1 (IA) in the periodic table.
Examples include lithium (Li), sodium (Na), potassium (K), rubidium (Rb), cesium (Cs), and francium (Fr).
कैल्शियम (Ca)। यह आवर्त सारणी में समूह 2 (IIA) से संबंधित है।
इसके सबसे बाहरी संयोजी कोश में दो इलेक्ट्रॉन होते हैं और धनायन बनाने के लिए इसमें दो इलेक्ट्रॉन खोने की प्रवृत्ति होती है।
इसलिए, इसे क्षारीय मृदा धातु के रूप में वर्गीकृत किया गया है।
क्षार धातुएँ: ये आवर्त सारणी में समूह 1 (IA) से संबंधित हैं।
उदाहरणों में लिथियम (Li), सोडियम (Na), पोटेशियम (K), रूबिडियम (Rb), सीज़ियम (Cs), और फ्रेंशियम (Fr) शामिल हैं।
RRB Group D 11/10/2018 (Afternoon)
231
What are the components of brass?
पीतल (brass) के घटक क्या हैं?
✅ Correct Answer: (D)
Copper and Zinc.
Brass is a metal alloy and used in pipes and tubing, musical instruments, and decorative items.
Important Alloys: Bronze = Cu + Sn; German Silver = Cu + Zn + Ni; Rolled Gold = Cu + Al; Solder = Pb + Sn; Stainless steel = Fe + Cr + Ni + C.
तांबा और जिंक। पीतल एक धातु मिश्र धातु है और इसका उपयोग पाइप और टयूबिंग, संगीत वाद्ययंत्र और सजावटी वस्तुओं में किया जाता है।
महत्वपूर्ण मिश्र धातुएँ: कांस्य = Cu + Sn; जर्मन सिल्वर = Cu + Zn + Ni; रोल्ड गोल्ड = Cu + Al; सोल्डर = Pb + Sn; स्टेनलेस स्टील = Fe + Cr + Ni + C।
RRB Group D 11/10/2018 (Evening)
232
To achieve higher temperatures, ____ is generally used in electric heating devices.
उच्च तापमान प्राप्त करने के लिए, इलेक्ट्रिक हीटिंग उपकरणों में आमतौर पर ____ का उपयोग किया जाता है।
✅ Correct Answer: (B)
Alloy. Alloys are used in electrical heating devices rather than pure metals because the resistivity of an alloy is more than the resistivity of a pure metal.
Examples of commonly used alloys in electric heating devices include: Nichrome (nickel and chromium), Kanthal (iron, chromium, and aluminum).
मिश्र धातु। शुद्ध धातुओं के बजाय विद्युत ताप उपकरणों में मिश्र धातुओं का उपयोग किया जाता है क्योंकि मिश्र धातु की प्रतिरोधकता शुद्ध धातु की प्रतिरोधकता से अधिक होती है।
इलेक्ट्रिक हीटिंग उपकरणों में आमतौर पर उपयोग किए जाने वाले मिश्र धातुओं के उदाहरणों में शामिल हैं: नाइक्रोम (निकल और क्रोमियम), कंथल (लोहा, क्रोमियम और एल्यूमीनियम)।
RRB Group D 12/10/2018 (Morning)
233
What are the components of solder?
सोल्डर के घटक क्या हैं?
✅ Correct Answer: (A)
Pb + Sn (lead and tin).
Solder has a low melting point and is used for welding electrical wires together.
Other examples: Brass is an alloy of copper and zinc (Cu and Zn), and bronze, an alloy of copper and tin (Cu and Sn).
Pb + Sn (सीसा और टिन)।
सोल्डर का गलनांक कम होता है और इसका उपयोग बिजली के तारों को एक साथ वेल्डिंग करने के लिए किया जाता है।
अन्य उदाहरण: पीतल तांबे और जस्ता (Cu और Zn) का एक मिश्र धातु है, और कांस्य, तांबे और टिन (Cu और Sn) का एक मिश्र धातु है।
RRB Group D 12/10/2018 (Morning)
234
What are the constituents of bronze?
कांस्य (bronze) के घटक क्या हैं?
✅ Correct Answer: (C)
Cu + Sn. An alloy is a homogenous mixture of two or more metals, or a metal and a nonmetal.
The Cu + Zn alloy is called Brass.
Pb + Sn alloy is called Solder.
Al + Cu + Mn + Mg alloy is called Duralumin.
Cu + Sn। एक मिश्र धातु दो या दो से अधिक धातुओं, या एक धातु और एक अधातु का सजातीय मिश्रण है।
Cu + Zn मिश्र धातु को पीतल कहा जाता है।
Pb + Sn मिश्र धातु को सोल्डर कहा जाता है।
Al + Cu + Mn + Mg मिश्र धातु को ड्यूरालुमिन कहा जाता है।
RRB Group D 12/10/2018 (Evening)
235
________ are comparatively poor conductors of heat.
________ तुलनात्मक रूप से ऊष्मा के कुचालक हैं।
✅ Correct Answer: (D)
Pb and Hg. Metals are generally good conductors of heat due to the presence of free-moving electrons that can readily transfer thermal energy throughout the metal.
Pb (सीसा) और Hg (पारा)।
मुक्त गति वाले इलेक्ट्रॉनों की उपस्थिति के कारण धातुएँ सामान्यतः ऊष्मा की सुचालक होती हैं जो धातु के आर-पार तापीय ऊर्जा को आसानी से स्थानांतरित कर सकती हैं।
RRB Group D 12/10/2018 (Evening)
236
If you place _______ metal on your palm, that metal melts.
यदि आप _______ धातु को अपनी हथेली पर रखते हैं, तो वह धातु पिघल जाती है।
✅ Correct Answer: (B)
Ga. Gallium (Ga), atomic number 31, is a metal that has a melting point of approximately 29.76°C (85.57 F) which is just slightly above room temperature.
Discovered year: 1875.
Ga (गैलियम)। गैलियम (Ga), परमाणु क्रमांक 31, एक ऐसी धातु है जिसका गलनांक लगभग 29.76°C (85.57 F) है जो कमरे के तापमान से थोड़ा ही ऊपर है।
खोजा गया वर्ष: 1875।
RRB Group D 15/10/2018 (Morning)
237
Nichrome is whose alloy?
नाइक्रोम किसकी मिश्र धातु है?
✅ Correct Answer: (A)
Ni - Nickel, Cr - Chromium, Mn - Manganese, Fe - Iron.
Other Commonly Used Alloys: Brass = Zinc + Copper; Bronze = Copper + Tin; Stainless steel = Iron + Chromium + Nickel; Magnalium = Aluminium + Magnesium.
Ni - निकल, Cr - क्रोमियम, Mn - मैंगनीज, Fe - लोहा।
अन्य आमतौर पर उपयोग की जाने वाली मिश्र धातुएं: पीतल = जिंक + तांबा; कांस्य = तांबा + टिन; स्टेनलेस स्टील = लोहा + क्रोमियम + निकल; मैग्नेलियम = एल्यूमिनियम + मैग्नीशियम।
RRB Group D 15/10/2018 (Morning)
238
Which of the following metals can form an amphoteric oxide?
निम्नलिखित में से कौन सी धातु उभयधर्मी (amphoteric) ऑक्साइड बना सकती है?
✅ Correct Answer: (A)
Al (Aluminum). Amphoteric oxides - The oxides that behave as both acidic and basic or that can react with acid as well as base.
Which of the following alloys is made up of 4 components?
निम्नलिखित में से कौन सी मिश्र धातु 4 घटकों से बनी है?
✅ Correct Answer: (B)
Nichrome. It is an alloy of Ni, Cr, Mn, and Fe.
Constantan: This alloy is typically composed of 55% copper and 45% nickel.
Solder varies widely in composition, but commonly used solders are tin-lead alloys.
नाइक्रोम। यह Ni, Cr, Mn और Fe का मिश्र धातु है।
कॉन्स्टेंटन: यह मिश्र धातु आमतौर पर 55% तांबे और 45% निकल से बनी होती है।
सोल्डर की संरचना व्यापक रूप से भिन्न होती है, लेकिन आमतौर पर उपयोग किए जाने वाले सोल्डर टिन-लेड मिश्र धातु होते हैं।
RRB Group D 15/10/2018 (Evening)
241
Compounds of which of the following metals are used in black and white photography?
निम्नलिखित में से किस धातु के यौगिकों का उपयोग श्वेत-श्याम फोटोग्राफी में किया जाता है?
✅ Correct Answer: (A)
Ag (Silver). Its compounds, specifically silver bromide (AgBr) and silver chloride (AgCl), are photosensitive and react to light.
This light sensitivity is essential for capturing the image on film.
Ag (चांदी)। इसके यौगिक, विशेष रूप से सिल्वर ब्रोमाइड (AgBr) और सिल्वर क्लोराइड (AgCl), प्रकाश के प्रति संवेदनशील होते हैं और प्रकाश पर प्रतिक्रिया करते हैं।
फिल्म पर छवि खींचने के लिए यह प्रकाश संवेदनशीलता आवश्यक है।
RRB Group D 16/10/2018 (Morning)
242
What is the property of a metal due to which it can be cast into wire?
किसी धातु का वह गुण क्या है जिसके कारण उसे तार के रूप में ढाला जा सकता है?
✅ Correct Answer: (C)
Ductility. Conductance refers to the ability of a material to conduct electricity.
Porosity refers to the presence of small voids or holes in a material.
Malleability is a property of a material by which it can be beaten to form thin sheets.
तन्यता। चालकत्व का तात्पर्य किसी पदार्थ की बिजली संचालित करने की क्षमता से है।
सरंध्रता से तात्पर्य किसी पदार्थ में छोटे छिद्रों या छेदों की उपस्थिति से है।
आघातवर्ध्यता किसी पदार्थ का एक गुण है जिसके द्वारा उसे पीटकर पतली चादरें बनाई जा सकती हैं।
RRB Group D 16/10/2018 (Morning)
243
Which of the following metals is used to make electrical wires?
बिजली के तार बनाने के लिए निम्नलिखित में से किस धातु का उपयोग किया जाता है?
✅ Correct Answer: (C)
Copper. This metal is highly conductive to electricity, meaning it allows electrons to flow easily through it.
Silver: While silver is even more conductive than copper, its high cost and scarcity make it impractical for widespread use in electrical wiring.
Magnesium and Lead are poor conductors of electricity.
तांबा। यह धातु बिजली के प्रति अत्यधिक प्रवाहकीय है, जिसका अर्थ है कि यह इलेक्ट्रॉनों को अपने माध्यम से आसानी से प्रवाहित होने देती है।
चांदी: जबकि चांदी तांबे की तुलना में अधिक प्रवाहकीय है, इसकी उच्च लागत और कमी इसे विद्युत तारों में व्यापक उपयोग के लिए अव्यावहारिक बनाती है।
मैग्नीशियम और सीसा बिजली के कुचालक हैं।
RRB Group D 16/10/2018 (Afternoon)
244
Solder is formed by the combination of which of the following?
निम्नलिखित में से किसके संयोजन से सोल्डर बनता है?
✅ Correct Answer: (A)
Lead and tin. Solder: This common type contains 60% tin and 40% lead.
It offers a good balance of melting point, strength, and flowability.
Important alloys and their uses: Brass (Cu + Zn) - In making utensils, Bronze (Cu + Sn) - In making coins, bell and utensils, Gun Metal (Cu + Zn + Ni) - In making guns, barrels, gears and bearings, Rolled Gold (Cu + Al) - In making cheap ornaments.
सीसा और टिन। सोल्डर: इस सामान्य प्रकार में 60% टिन और 40% लेड होता है।
यह गलनांक, मजबूती और प्रवाह क्षमता का अच्छा संतुलन प्रदान करता है।
महत्वपूर्ण मिश्र धातुएं और उनके उपयोग: पीतल (Cu + Zn) - बर्तन बनाने में, कांस्य (Cu + Sn) - सिक्के, घंटी और बर्तन बनाने में, गन मेटल (Cu + Zn + Ni) - बंदूकें, बैरल, गियर और बियरिंग बनाने में, रोल्ड गोल्ड (Cu + Al) - सस्ते आभूषण बनाने में।
RRB Group D 16/10/2018 (Afternoon)
245
Which of the following is an example of a metal that needs to be stored under oil?
निम्नलिखित में से कौन सी धातु का उदाहरण है जिसे तेल के नीचे संग्रहित करने की आवश्यकता है?
✅ Correct Answer: (A)
Potassium: It is a highly reactive metal that reacts vigorously with air and moisture, readily undergoing oxidation and combustion.
Iron: While iron oxidizes (rusts) when exposed to air and moisture, the process is relatively slow.
पोटेशियम: यह एक अत्यधिक अभिक्रियाशील धातु है जो हवा और नमी के साथ तीव्रता से अभिक्रिया करती है, आसानी से ऑक्सीकरण और दहन से गुजरती है।
लोहा: हालांकि हवा और नमी के संपर्क में आने पर लोहा ऑक्सीकरण (जंग) करता है, यह प्रक्रिया अपेक्षाकृत धीमी होती है।
RRB Group D 16/10/2018 (Evening)
246
Sodium is stored in _________ .
सोडियम को _________ में संग्रहित किया जाता है।
✅ Correct Answer: (A)
Kerosene. Sodium (Na - 11) was discovered in 1807 by the English chemist Humphry Davy from electrolysis of caustic soda (NaOH).
It reacts vigorously with oxygen and moisture due to its high reactivity so keeping it in kerosene will prevent sodium from coming in contact with oxygen and moisture.
केरोसिन। सोडियम (Na - 11) की खोज 1807 में अंग्रेजी रसायनज्ञ हम्फ्री डेवी ने कास्टिक सोडा (NaOH) के इलेक्ट्रोलिसिस से की थी।
यह अपनी उच्च अभिक्रियाशीलता के कारण ऑक्सीजन और नमी के साथ तीव्रता से प्रतिक्रिया करता है, इसलिए इसे मिट्टी के तेल (केरोसिन) में रखने से सोडियम ऑक्सीजन और नमी के संपर्क में आने से बच जाएगा।
RRB Group D 22/10/2018 (Morning)
247
In an alloy, if one of the metals is mercury, the alloy is known as:
किसी मिश्र धातु में यदि कोई एक धातु पारा है, तो उस मिश्र धातु को कहा जाता है:
✅ Correct Answer: (A)
Amalgam. It is an alloy of mercury with one or more metals.
Example - Sodium along with liquid mercury is called sodium amalgam.
An alloy is a homogeneous mixture of two or more metals, or a metal and a nonmetal.
Bronze - An alloy of copper and tin.
Brass - An alloy of copper and zinc.
Solder - An alloy of lead and tin.
अमलगम। यह एक या एक से अधिक धातुओं के साथ पारे की मिश्र धातु है।
उदाहरण - तरल पारे के साथ सोडियम को सोडियम अमलगम कहा जाता है।
मिश्र धातु दो या दो से अधिक धातुओं, या एक धातु और एक अधातु का सजातीय मिश्रण है।
कांस्य - तांबे और टिन का मिश्र धातु।
पीतल - तांबे और जस्ता का मिश्र धातु।
सोल्डर - सीसा और टिन का मिश्र धातु।
RRB Group D 22/10/2018 (Morning)
248
________ is never found as a free element in nature.
________ प्रकृति में कभी भी मुक्त तत्व के रूप में नहीं पाया जाता है।
✅ Correct Answer: (A)
Ca (Calcium). The metals like Na (Sodium), K (Potassium), Ca (Calcium) and Mg (Magnesium) are not found in their free state in nature.
Au (Gold), Pt (platinum), Cu (copper) and Ag (silver) are least reactive metals, hence they are found in the free state in nature.
Ca (कैल्शियम)। Na (सोडियम), K (पोटेशियम), Ca (कैल्शियम) और Mg (मैग्नीशियम) जैसी धातुएं प्रकृति में अपनी मुक्त अवस्था में नहीं पाई जाती हैं।
Au (सोना), Pt (प्लैटिनम), Cu (तांबा) और Ag (चांदी) सबसे कम अभिक्रियाशील धातुएं हैं, इसलिए वे प्रकृति में मुक्त अवस्था में पाई जाती हैं।
(Not specified in source)
249
Which element has the highest melting point and boiling point?
किस तत्व का गलनांक और क्वथनांक सबसे अधिक होता है?
✅ Correct Answer: (D)
Tungsten (symbol W and atomic number 74).
It is used in products such as x-ray tubes, light bulbs, high-speed tools, welding electrodes, turbine blades, and armor penetrators.
The boiling point of tungsten is approximately 10701 °F, and the melting point is approximately 6170 °F.
Electrical resistivity of Tungsten at 20°C is 5.20 × 10^-8.
टंगस्टन (प्रतीक W और परमाणु क्रमांक 74)।
इसका उपयोग एक्स-रे ट्यूब, लाइट बल्ब, हाई-स्पीड टूल्स, वेल्डिंग इलेक्ट्रोड, टर्बाइन ब्लेड और कवच भेदक (armor penetrators) जैसे उत्पादों में किया जाता है।
टंगस्टन का क्वथनांक लगभग 10701 °F है, और गलनांक लगभग 6170 °F है।
20°C पर टंगस्टन की विद्युत प्रतिरोधकता 5.20 × 10^-8 है।
RRB Group D 23/10/2018 (Morning)
250
What is that property of a metal called, in which its surface is shiny?
किसी धातु का वह गुण क्या कहलाता है, जिसमें उसकी सतह चमकदार होती है?
✅ Correct Answer: (D)
Metallic luster.
It refers to the shiny appearance exhibited by metals due to their ability to reflect light.
Malleability: The property of metals by which they can be beaten into thin sheets.
Hardness: It refers to the ability of a material to resist deformation.
धात्विक चमक (Metallic luster)।
यह प्रकाश को प्रतिबिंबित करने की क्षमता के कारण धातुओं द्वारा प्रदर्शित चमकदार उपस्थिति को संदर्भित करता है।
आघातवर्ध्यता: धातुओं का वह गुण जिसके द्वारा उन्हें पीटकर पतली चादर बनाया जा सकता है।
कठोरता: यह किसी सामग्री की विरूपण का विरोध करने की क्षमता को दर्शाता है।
RRB Group D 23/10/2018 (Morning)
251
Which of the following has maximum Malleability?
निम्नलिखित में से किसमें अधिकतम आघातवर्ध्यता (Malleability) है?
✅ Correct Answer: (A)
Gold (Au). The property of metals by which they can be beaten into thin sheets is called malleability.
Some other examples: Copper, Silver, Zinc, etc.
सोना (Au)। धातुओं का वह गुण जिसके द्वारा उन्हें पीट-पीटकर पतली चादर बनाया जा सकता है, आघातवर्ध्यता कहलाता है।
कुछ अन्य उदाहरण: तांबा, चांदी, जस्ता, आदि।
RRB Group D 23/10/2018 (Afternoon)
252
Identify the liquid metal used in a thermometer.
थर्मामीटर में प्रयुक्त तरल धातु को पहचानें।
✅ Correct Answer: (A)
Mercury. It has a low freezing point and a high boiling point.
It has a high coefficient of thermal expansion.
Due to environmental and health concerns, the use of mercury in thermometers is being phased out in many countries.
Safer alternatives like alcohol or galinstan (a non-toxic alloy) are increasingly used.
पारा। इसका हिमांक (freezing point) कम होता है और क्वथनांक उच्च होता है।
इसमें ऊष्मीय विस्तार (thermal expansion) का गुणांक उच्च होता है।
पर्यावरणीय और स्वास्थ्य संबंधी चिंताओं के कारण, कई देशों में थर्मामीटर में पारे का उपयोग चरणबद्ध तरीके से समाप्त किया जा रहा है।
अल्कोहल या गैलिंस्टन (एक गैर विषैले मिश्र धातु) जैसे सुरक्षित विकल्पों का तेजी से उपयोग किया जा रहा है।
RRB Group D 23/10/2018 (Afternoon)
253
Which of the following metals is most malleable?
निम्नलिखित में से कौन सी धातु सबसे अधिक आघातवर्ध्य है?
✅ Correct Answer: (D)
Ag (Silver). Malleability refers to the ability of a metal to be hammered or pressed into thin sheets without breaking or cracking.
Silver is known for its exceptional malleability, making it highly suitable for various applications, including jewelry, coins, and decorative items.
Ag (चांदी)। आघातवर्ध्यता से तात्पर्य किसी धातु की टूटे या टूटे बिना पतली चादरों में हथौड़े से या दबाए जाने की क्षमता से है।
चांदी अपनी असाधारण आघातवर्ध्यता के लिए जानी जाती है, जो इसे आभूषण, सिक्के और सजावटी वस्तुओं सहित विभिन्न अनुप्रयोगों के लिए अत्यधिक उपयुक्त बनाती है।
RRB Group D 24/10/2018 (Evening)
254
_______ metal do not corrode.
_______ धातु संक्षारित (corrode) नहीं होती।
✅ Correct Answer: (D)
Platinum. Gold and platinum are classified as noble metals, which means they are resistant to oxidation and corrosion compared to other metals.
This is due to their electronic configuration, specifically the presence of filled d- and f-orbitals in their outermost energy levels.
Corrosion - The degradation of metals due to an electrochemical process.
The formation of rust on iron is an example of corrosion.
प्लैटिनम। सोना और प्लैटिनम को उत्कृष्ट (noble) धातुओं के रूप में वर्गीकृत किया गया है, जिसका अर्थ है कि वे अन्य धातुओं की तुलना में ऑक्सीकरण और जंग के प्रतिरोधी हैं।
यह उनके इलेक्ट्रॉनिक विन्यास के कारण है, विशेष रूप से उनके बाहरी ऊर्जा स्तरों में भरे हुए d- और f-कक्षाओं की उपस्थिति।
संक्षारण - एक विद्युत रासायनिक प्रक्रिया के कारण धातुओं का क्षरण।
लोहे पर जंग लगना संक्षारण का एक उदाहरण है।
RRB Group D 25/10/2018 (Afternoon)
255
Among the following options, the most ductile metal is _______.
निम्नलिखित विकल्पों में से, सबसे अधिक तन्य धातु ______ है।
✅ Correct Answer: (C)
Au (Gold): Atomic number - 79.
It has an enormous ability to get stretched and high malleability and ductility, high thermal and electrical conductivities, resistant to corrosion.
Platinum (Pt78) and Silver (Ag47) are also the most ductile natural metals.
Au (सोना): परमाणु क्रमांक - 79।
इसमें खिंचने की अपार क्षमता और उच्च आघातवर्ध्यता और तन्यता, उच्च तापीय और विद्युत चालकता, संक्षारण प्रतिरोधी है।
प्लैटिनम (Pt78) और चांदी (Ag47) भी सबसे अधिक तन्य प्राकृतिक धातुएं हैं।
RRB Group D 25/10/2018 (Afternoon)
256
What is formed when a metal reacts with oxygen?
जब कोई धातु ऑक्सीजन के साथ अभिक्रिया करती है तो क्या बनता है?
✅ Correct Answer: (A)
Metal oxides - Basic in nature and turn red litmus to blue.
Which of the following metals catches fire immediately when kept in the open?
निम्नलिखित में से कौन सी धातु खुले में रखने पर तुरंत आग पकड़ लेती है?
✅ Correct Answer: (D)
Sodium and potassium: These are highly reactive alkali metals.
They readily react with oxygen in the air at room temperature, releasing a significant amount of heat and often igniting spontaneously.
सोडियम और पोटेशियम: ये अत्यधिक अभिक्रियाशील क्षार धातुएँ हैं।
वे कमरे के तापमान पर हवा में ऑक्सीजन के साथ आसानी से प्रतिक्रिया करते हैं, जिससे महत्वपूर्ण मात्रा में गर्मी निकलती है और अक्सर अनायास प्रज्वलित हो जाते हैं।
RRB Group D 2/11/2018 (Morning)
258
Metal is malleable and soft because:
धातु आघातवर्ध्य और मुलायम होती है क्योंकि:
✅ Correct Answer: (C)
The property of metals by which they can be beaten into thin sheets is called malleability.
The property of metal by which it can be drawn into wires is called ductility.
Metals that produce ringing sounds are said to be sonorous.
धातुओं का वह गुण जिसके द्वारा उन्हें पीटकर पतली चादर बनाया जा सकता है, आघातवर्ध्यता कहलाता है।
धातु का वह गुण जिसके द्वारा उसे तार में खींचा जा सकता है, तन्यता कहलाता है।
बजने वाली ध्वनि उत्पन्न करने वाली धातुएँ ध्वन्यात्मक (sonorous) कहलाती हैं।
RRB Group D 3/12/2018 (Afternoon)
259
Which of the following is not a physical property of non-metals?
निम्नलिखित में से कौन सा अधातुओं का भौतिक गुण नहीं है?
✅ Correct Answer: (A)
Exists only in solid state.
Examples of non-metals are sulfur, carbon, oxygen, phosphorus, etc. The property of metals by which they can be beaten into thin sheets is called malleability.
Those metals which can be drawn into wire are called ductile.
Metals like sodium and potassium are soft and can be cut with a knife.
Mercury is the only metal which is found in liquid state at room temperature.
केवल ठोस अवस्था में मौजूद होता है।
अधातुओं के उदाहरण सल्फर, कार्बन, ऑक्सीजन, फास्फोरस आदि हैं।
धातुओं का वह गुण जिसके द्वारा उन्हें पीटकर पतली चादर बनाया जा सकता है, आघातवर्ध्यता कहलाता है।
जिन धातुओं को तार में खींचा जा सकता है वे तन्य कहलाती हैं।
सोडियम और पोटेशियम जैसी धातुएं नरम होती हैं और इन्हें चाकू से काटा जा सकता है।
पारा एकमात्र ऐसी धातु है जो कमरे के तापमान पर तरल अवस्था में पाई जाती है।
RRB Group D 06/12/2018 (Evening)
260
Which of the following is not a characteristic of transition elements?
निम्नलिखित में से कौन संक्रमण तत्वों की विशेषता नहीं है?
✅ Correct Answer: (B)
All of these are air.
According to IUPAC, transition metals are defined as metals which have an incomplete d subshell either in neutral atoms or in their ions.
The period 4 transition metals are scandium (Sc21), titanium (Ti22), vanadium (V23), chromium (Cr24), manganese (Mn25), iron (Fe26), cobalt (Co27), nickel (Ni28), copper (Cu29), and zinc (Zn30).
ये सभी हवा हैं। IUPAC के अनुसार, संक्रमण धातुओं को उन धातुओं के रूप में परिभाषित किया गया है जिनके तटस्थ परमाणुओं (neutral atoms) में या उनके आयनों में एक अधूरा d उपकोश (subshell) होता है।
अवधि 4 संक्रमण धातुएं स्कैंडियम (Sc21), टाइटेनियम (Ti22), वैनेडियम (V23), क्रोमियम (Cr24), मैंगनीज (Mn25), लोहा (Fe26), कोबाल्ट (Co27), निकल (Ni28), तांबा (Cu29), और जिंक (Zn30) हैं।
RRB Group D 06/12/2018 (Evening)
261
Identify the non-metal among the following elements.
निम्नलिखित तत्वों में से अधातु को पहचानें।
✅ Correct Answer: (B)
Chlorine is a chemical element with symbol Cl and atomic number 17.
Classified as a halogen, Chlorine is a gas at room temperature.
Non-metals are the elements which form negative ions by gaining an electron.
क्लोरीन एक रासायनिक तत्व है जिसका प्रतीक Cl और परमाणु क्रमांक 17 है।
हैलोजन के रूप में वर्गीकृत, क्लोरीन कमरे के तापमान पर एक गैस है।
अधातुएं वे तत्व हैं जो इलेक्ट्रॉन ग्रहण करके ऋणात्मक आयन बनाते हैं।
RRB Group D 12/12/2018 (Evening)
262
An alloy is an example of:
एक मिश्र धातु किसका उदाहरण है:
✅ Correct Answer: (C)
Solid solution. Alloy is a mixture of two or more metals, or a metal and a nonmetal.
A colloid is a mixture in which one substance of dispersed insoluble particles is suspended throughout another substance.
Emulsion is a colloidal solution where both dispersed phase and dispersed medium are liquids.
Examples - Milk, face cream etc. Heterogeneous mixture - A mixture in which the components are not uniformly distributed through its volume.
Example - Mixture of salt and iron powder.
ठोस विलयन। मिश्र धातु दो या दो से अधिक धातुओं, या एक धातु और एक अधातु का मिश्रण है।
कोलाइड एक ऐसा मिश्रण है जिसमें बिखरे हुए अघुलनशील कणों का एक पदार्थ दूसरे पदार्थ में निलंबित रहता है।
पायस एक कोलाइडल समाधान है जहां बिखरे हुए चरण (dispersed phase) और बिखरे हुए माध्यम दोनों तरल होते हैं।
उदाहरण - दूध, फेस क्रीम आदि।
विषमांगी मिश्रण - एक ऐसा मिश्रण जिसमें घटकों को उसके आयतन के माध्यम से समान रूप से वितरित नहीं किया जाता है।
उदाहरण - नमक और लोहे के पाउडर का मिश्रण।
RRB ALP Tier-I (10/08/2018) Afternoon
263
If Metal A displaces Metal B from its solution, then Metal A _______.
यदि धातु A अपने विलयन से धातु B को विस्थापित करती है, तो धातु A ______।
✅ Correct Answer: (C)
Is more reactive than B.
All metals are not reactive equally.
A highly reactive metal displaces less reactive metals from its salt solution.
Example - If Zinc is placed in copper sulphate solution then zinc will displace the copper from the solution.
Some of the common metals are arranged in reactivity series - K (Potassium) > Na (Sodium) > Ca (Calcium) > Mg (Magnesium) > Al (Aluminium) > Zn (Zinc) > Fe (Iron) > Pb (Lead) > H (Hydrogen) > Cu (Copper) > Hg (Mercury) > Ag (Silver) > Au (Gold) > Pt (Platinum).
B से अधिक अभिक्रियाशील है।
सभी धातुएं समान रूप से अभिक्रियाशील नहीं होती हैं।
एक अत्यधिक अभिक्रियाशील धातु कम अभिक्रियाशील धातुओं को उनके नमक के घोल से विस्थापित कर देती है।
उदाहरण - यदि जिंक को कॉपर सल्फेट के घोल में रखा जाए तो जिंक घोल से तांबे को विस्थापित कर देगा।
कुछ सामान्य धातुओं को अभिक्रियाशीलता श्रेणी में व्यवस्थित किया गया है - K (पोटेशियम) > Na (सोडियम) > Ca (कैल्शियम) > Mg (मैग्नीशियम) > Al (एल्यूमिनियम) > Zn (जिंक) > Fe (लोहा) > Pb (सीसा) > H (हाइड्रोजन) > Cu (तांबा) > Hg (पारा) > Ag (चांदी) > Au (सोना) > Pt (प्लेटिनम)।
RRB ALP Tier-I (10/08/2018) Afternoon
264
Which of the following does NOT act as both, metal and nonmetal?
निम्नलिखित में से कौन धातु और अधातु दोनों के रूप में कार्य नहीं करता है?
✅ Correct Answer: (C)
Bismuth (Bi). Metals - Elements which form positive ions by losing electrons in chemical reactions except hydrogen.
Example - Gold (Au), Silver (Ag) and Nickel (Ni).
Non-metals - Elements that tend to gain electrons to form anions during chemical reactions.
Example - H2(g), N2(g), O2(g), and Cl2(g).
Metalloids: Those elements which have properties of both metals and nonmetals.
बिस्मथ (Bi)। धातुएँ - वे तत्व जो हाइड्रोजन को छोड़कर रासायनिक अभिक्रियाओं में इलेक्ट्रॉन खोकर धनात्मक आयन बनाते हैं।
उदाहरण - सोना (Au), चांदी (Ag) और निकल (Ni)।
अधातुएँ - वे तत्व जो रासायनिक अभिक्रियाओं के दौरान ऋणायन बनाने के लिए इलेक्ट्रॉन प्राप्त करते हैं।
उदाहरण - H2(g), N2(g), O2(g), और Cl2(g)।
उपधातु: वे तत्व जिनमें धातु और अधातु दोनों के गुण होते हैं।
उदाहरण - सिलिकॉन (Si), जर्मेनियम (Ge), आर्सेनिक (As), बोरॉन (B), टेल्यूरियम (Te) और पोलोनियम (Po)।
RRB ALP Tier-I (10/08/2018) Evening
265
Which of the following metals is the most Malleable?
निम्नलिखित में से कौन सी धातु सबसे अधिक आघातवर्ध्य (Malleable) है?
✅ Correct Answer: (C)
Silver (Ag). Metals: Shiny in appearance, good conductors of electricity, strong and hard, malleable and ductile.
Malleability - The property of a substance that describes its ability to bend or is hammered into a thin sheet without breaking.
Gold (Au) is the most malleable and ductile metals.
Nickel (Ni) is the least malleable.
Exception: Sodium (Na) and Potassium (K) are soft and can be easily cut by a knife.
चांदी (Ag)। धातुएँ: दिखने में चमकदार, बिजली की सुचालक, मजबूत और कठोर, आघातवर्ध्य और तन्य।
आघातवर्ध्यता - किसी पदार्थ का वह गुण जो बिना टूटे झुकने या पतली शीट में हथौड़े से पीटे जाने की क्षमता का वर्णन करता है।
सोना (Au) सबसे आघातवर्ध्य और तन्य धातु है।
निकल (Ni) सबसे कम आघातवर्ध्य है।
अपवाद: सोडियम (Na) और पोटेशियम (K) नरम होते हैं और चाकू से आसानी से काटे जा सकते हैं।
RRB ALP Tier-I (13/08/2018) Afternoon
266
Which of the following causes damage to bridges, iron railings and all objects made of metals?
निम्नलिखित में से कौन सा पुलों, लोहे की रेलिंग और धातुओं से बनी सभी वस्तुओं को नुकसान पहुंचाता है?
✅ Correct Answer: (C)
Corrosion. It is a natural process that converts a refined metal into a more chemically stable oxide.
Acidity - Medical condition that is caused due to excess production of acid by the glands of the stomach.
Reduction - Any of a class of chemical reactions in which the number of electrons associated with an atom or a group of atoms is increased.
संक्षारण। यह एक प्राकृतिक प्रक्रिया है जो एक परिष्कृत धातु को अधिक रासायनिक रूप से स्थिर ऑक्साइड में परिवर्तित करती है।
अम्लता - चिकित्सीय स्थिति जो पेट की ग्रंथियों द्वारा एसिड के अधिक उत्पादन के कारण होती है।
अपचयन - रासायनिक प्रतिक्रियाओं का कोई वर्ग जिसमें किसी परमाणु या परमाणुओं के समूह से जुड़े इलेक्ट्रॉनों की संख्या बढ़ जाती है।
RRB ALP Tier-I (14/08/2018) Morning
267
Which of the following metals does NOT react with cold or hot water?
निम्नलिखित में से कौन सी धातु ठंडे या गर्म पानी के साथ अभिक्रिया नहीं करती है?
✅ Correct Answer: (A)
Aluminium (Al). Also, Iron (Fe) and Zinc (Zn) do not react with cold or hot water.
Metals which react with water are Lithium (Li), Sodium (Na), Potassium (K), Rubidium (Rb), Caesium (Cs), and Francium (Fr).
Metal oxide and hydrogen gas is created when a metal and water reacts together.
Oxides are produced when zinc, aluminium and steam react.
एल्यूमिनियम (Al)।
इसके अलावा, लोहा (Fe) और जिंक (Zn) ठंडे या गर्म पानी के साथ प्रतिक्रिया नहीं करते हैं।
जो धातुएं पानी के साथ अभिक्रिया करती हैं वे लिथियम (Li), सोडियम (Na), पोटेशियम (K), रूबिडियम (Rb), सीज़ियम (Cs), और फ्रेंशियम (Fr) हैं।
जब धातु और पानी एक साथ अभिक्रिया करते हैं तो धातु ऑक्साइड और हाइड्रोजन गैस बनती है।
जिंक, एल्यूमीनियम और भाप के प्रतिक्रिया करने पर ऑक्साइड उत्पन्न होते हैं।
RRB ALP Tier-I (17/08/2018) Morning
268
Which of the following metals is NOT obtained by reduction using carbon?
कार्बन का उपयोग करके अपचयन (reduction) द्वारा निम्नलिखित में से कौन सी धातु प्राप्त नहीं की जाती है?
✅ Correct Answer: (C)
Sodium (Symbol - Na, Atomic number - 11, Group - 1): It is high in the reactivity series and metals high in the reactivity series have more affinity for oxygen than carbon.
Other metals high up in the reactivity are Magnesium (Mg, Atomic number 12), Calcium (Ca, 20), Aluminium (Al, 13).
Carbon (C, 6) cannot reduce all metals; The ability of carbon to reduce a metal is based upon its relative reactivity as compared to the metal; Carbon can only reduce those metal oxides whose metals have less reactivity than carbon.
Copper (Cu, 29, group 11).
Zinc (Zn, 30, Group 12).
Iron (Fe, 26, group 8).
सोडियम (प्रतीक - Na, परमाणु क्रमांक - 11, समूह - 1): यह अभिक्रियाशीलता श्रेणी में उच्च है और अभिक्रियाशीलता श्रेणी में उच्च धातुओं में कार्बन की तुलना में ऑक्सीजन के लिए अधिक आत्मीयता है।
अभिक्रियाशीलता में अन्य उच्च धातुएँ मैग्नीशियम (Mg, परमाणु क्रमांक 12), कैल्शियम (Ca, 20), एल्यूमीनियम (Al, 13) हैं।
कार्बन (C, 6) सभी धातुओं को कम (अपचयित) नहीं कर सकता; कार्बन की किसी धातु को कम करने की क्षमता धातु की तुलना में इसकी सापेक्ष अभिक्रियाशीलता पर आधारित है; कार्बन केवल उन धातु ऑक्साइडों को अपचयित कर सकता है जिनकी धातुएँ कार्बन की तुलना में कम अभिक्रियाशील हैं।
तांबा (Cu, 29, समूह 11)।
जिंक (Zn, 30, समूह 12)।
लोहा (Fe, 26, समूह 8)।
RRB ALP Tier-I (20/08/2018) Afternoon
269
Which of the following metals reacts vigorously with cold water?
निम्नलिखित में से कौन सी धातु ठंडे पानी के साथ तीव्रता से अभिक्रिया करती है?
✅ Correct Answer: (D)
Potassium. K + H2O → KOH + H2; Hydrogen gas is emitted and the metal hydroxide is produced.
Sodium too reacts violently with cold water.
The reaction is so violent and exothermic that the evolved hydrogen immediately catches fire.
पोटेशियम। K + H2O → KOH + H2; हाइड्रोजन गैस उत्सर्जित होती है और धातु हाइड्रॉक्साइड उत्पन्न होता है।
सोडियम भी ठंडे पानी के साथ हिंसक प्रतिक्रिया करता है।
प्रतिक्रिया इतनी तीव्र और ऊष्माक्षेपी होती है कि विकसित हाइड्रोजन तुरंत आग पकड़ लेती है।
RRB ALP Tier-I (20/08/2018) Evening
270
Which of the following metals does NOT react with Oxygen even at a high temperature?
निम्नलिखित में से कौन सी धातु उच्च तापमान पर भी ऑक्सीजन के साथ अभिक्रिया नहीं करती है?
✅ Correct Answer: (A)
Silver (Ag, Atomic number 47).
Properties - White, lustrous, soft, very ductile, malleable, excellent conductor of heat and electricity, quite an unreactive metal.
Uses - Dental alloys, solder and brazing alloys, electrical contacts and batteries, Silver paints (making printed circuits).
Potassium (K) - Most Reactive, Atomic Number 19; Platinum (Pt) - Least Reactive, Atomic Number 78.
चांदी (Ag, परमाणु क्रमांक 47)।
गुण - सफेद, चमकदार, मुलायम, बहुत तन्य, आघातवर्ध्य, ऊष्मा और बिजली का उत्कृष्ट सुचालक, काफी गैर-प्रतिक्रियाशील धातु।
उपयोग - दंत मिश्र धातु (Dental alloys), सोल्डर और ब्रेज़िंग मिश्र धातु, विद्युत संपर्क और बैटरी, सिल्वर पेंट (मुद्रित सर्किट बनाना)।
पोटेशियम (K) - सबसे अधिक अभिक्रियाशील, परमाणु क्रमांक 19; प्लैटिनम (Pt) - सबसे कम अभिक्रियाशील, परमाणु क्रमांक 78।
RRB ALP Tier-I (21/08/2018) Afternoon
271
Non-metals generally contain _______ electrons in their outermost shell.
अधातुओं के सबसे बाहरी कोश में सामान्यतः _______ इलेक्ट्रॉन होते हैं।
✅ Correct Answer: (A)
5, 6, 7 or 8. Non-metals have more than 4 valence electrons located right side of the periodic table.
Example: Nitrogen (N2), Oxygen (O2) and Fluorine (F2) contain 5, 6 or 7 numbers of electrons respectively in their outermost shell.
Metals are electropositive elements, have 1, 2 or 3 electrons in the outermost shell (or valence shell) of their atoms.
5, 6, 7 या 8। अधातुओं में आवर्त सारणी के दाईं ओर स्थित 4 से अधिक संयोजी इलेक्ट्रॉन होते हैं।
उदाहरण: नाइट्रोजन (N2), ऑक्सीजन (O2) और फ्लोरीन (F2) के सबसे बाहरी कोश में क्रमशः 5, 6 या 7 इलेक्ट्रॉन होते हैं।
धातुएँ विद्युत धनात्मक तत्व हैं, इनके परमाणुओं के सबसे बाहरी कोश (या संयोजी कोश) में 1, 2 या 3 इलेक्ट्रॉन होते हैं।
RRB ALP Tier-I (29/08/2018) Morning
272
Common metals arranged in order of their decreasing reactivity is known as:
सामान्य धातुओं को उनकी घटती अभिक्रियाशीलता के क्रम में व्यवस्थित किया जाता है, जिसे किस रूप में जाना जाता है:
✅ Correct Answer: (B)
Activity series (Reactivity Series).
For any two metals in the series, the metal placed higher in the series can displace lower metals from their salt solution.
Potassium is the most reactive metal.
Electrolytic Reduction - The metals which are highly reactive are obtained by electrolysis of their molten ores and pure metal is obtained near the cathode.
Conductivity - The ability of a metal to conduct electricity through.
Reactivity - Rate at which a chemical substance tends to undergo a chemical reaction.
सक्रियता श्रेणी (अभिक्रियाशीलता श्रेणी)।
श्रृंखला में किन्हीं दो धातुओं के लिए, श्रृंखला में ऊंची रखी गई धातु कम धातु को उनके नमक के घोल से विस्थापित कर सकती है।
पोटेशियम सबसे अधिक अभिक्रियाशील धातु है।
विद्युत अपघटनी अपचयन (Electrolytic Reduction) - जो धातुएँ अत्यधिक अभिक्रियाशील होती हैं, उन्हें उनके पिघले हुए अयस्कों के विद्युत अपघटन से प्राप्त किया जाता है और शुद्ध धातु कैथोड के पास प्राप्त होती है।
चालकता - किसी धातु की अपने माध्यम से बिजली प्रवाहित करने की क्षमता।
अभिक्रियाशीलता - वह दर जिस पर किसी रासायनिक पदार्थ में रासायनिक अभिक्रिया होने की प्रवृत्ति होती है।
RRB ALP Tier-I (29/08/2018) Evening
273
Which of the following is added to iron to make iron hard and strong?
लोहे को कठोर और मजबूत बनाने के लिए उसमें निम्नलिखित में से क्या मिलाया जाता है?
✅ Correct Answer: (D)
Carbon. It stops the dislocation of the Iron atoms in the crystal lattice from sliding past one another.
Therefore this type of impurity is used to control the hardness, ductility and tensile strength of carbon.
It is also added to Steel to increase strength and hardness.
कार्बन। यह क्रिस्टल जाली में लोहे के परमाणुओं को एक दूसरे से फिसलने से रोकता है।
इसलिए इस प्रकार की अशुद्धता का उपयोग कार्बन की कठोरता, तन्यता और तन्य शक्ति को नियंत्रित करने के लिए किया जाता है।
ताकत और कठोरता बढ़ाने के लिए इसे स्टील में भी मिलाया जाता है।
RRB ALP Tier-I (30/08/2018) Morning
274
Which of the following is NOT malleable?
निम्नलिखित में से कौन आघातवर्ध्य (malleable) नहीं है?
✅ Correct Answer: (D)
Graphite. It is a unique form of carbon that displays some properties of both metals and non-metals.
It is non-metal in terms of its chemical properties but exhibits certain metallic properties due to its unique structure.
It is not elastic and has high electrical and thermal conductivity.
It is also chemically inert and highly refractory.
Malleability is a material's ability to form thin sheets under pressure by hammering or rolling.
Examples of malleable metals: gold, iron, aluminum, copper, silver and lead.
ग्रेफाइट। यह कार्बन का एक अनूठा रूप है जो धातु और अधातु दोनों के कुछ गुण प्रदर्शित करता है।
यह अपने रासायनिक गुणों के संदर्भ में अधातु है लेकिन अपनी अनूठी संरचना के कारण कुछ धात्विक गुण प्रदर्शित करता है।
यह लोचदार नहीं है और इसमें उच्च विद्युत और तापीय चालकता है।
यह रासायनिक रूप से निष्क्रिय और अत्यधिक दुर्दम्य (refractory) भी है।
आघातवर्ध्यता किसी सामग्री की दबाव के तहत हथौड़े से पीटकर या रोल करके पतली चादरें बनाने की क्षमता है।
आघातवर्ध्य धातुओं के उदाहरण: सोना, लोहा, एल्युमीनियम, तांबा, चांदी और सीसा।